| Author | Topic |
|---|
Location:
melb
Registered:
June 2003
|
|
w box shifter bushs
|
Tue, 24 May 2005 14:55
|
 |
Does anybody know where 2 get non genuine shifter bushes (as in the bush that sits in the shifter housing not the 1 on the end of the stick) there was talk of it on here a while ago , if not does anybody live near somersby NSW cause i found a company that will copy a good second hand 1 , red ranger is the company.
toyota only sell the shifter housing with the bush at a couple of hundred $$
|
|
|
I supported Toymods
Location:
Australia
Registered:
November 2003
|
|
Re: w box shifter bushs
|
Tue, 24 May 2005 23:22
|
|
Do you mean the one that tis about 40mm across, and the ball/pivot point sits in it?
Or the one that the other bush goes in, the elbow thingy?
|
|
|
Location:
Hobart, Tas
Registered:
May 2002
|
|
Re: w box shifter bushs
|
Tue, 24 May 2005 23:54
|
|
Toyota DO sell that black/green donut bushing that sits in the shifter housing separately, and the genuine one is around $25 IIRC. The one on the end of the shifter itself (white) is less than $10 IIRC.
I don't have the part numbers on me, but many other forum members have replaced these bushings. Someone else should have them, or you could do a search.
|
|
|
I supported Toymods
Location:
Australia
Registered:
November 2003
|
|
Re: w box shifter bushs
|
Tue, 24 May 2005 23:56
|
|
|
Part numbers are in the FAQ
|
|
|
Location:
melb
Registered:
June 2003
|
|
|
I supported Toymods
Location:
Australia
Registered:
November 2003
|
|
|
Location:
melb
Registered:
June 2003
|
|
Re: w box shifter bushs
|
Thu, 26 May 2005 14:20
|
|
I did look , but , thanks 4 that
Dave
|
|
|
