| Author | Topic |
|---|
Location:
Canada
Registered:
September 2004
|
|
GZ20 Pressure Plate
|
Wed, 01 June 2005 22:21
|
 |
|
Is the GZ20 pressure plate shared with any other car? If I am just searching for an aftermarket plate, what car do I look for?
|
|
|
Location:
south east - melbourne
Registered:
March 2004
|
|
Re: GZ20 Pressure Plate
|
Wed, 01 June 2005 22:42
|
|
|
ga70 supra
|
|
|
Location:
Canada
Registered:
September 2004
|
|
Re: GZ20 Pressure Plate
|
Wed, 01 June 2005 23:15
|
|
What pressure plate do the GA70 and GZ20 share with? I'm looking hoping something more common in the after market.
MA70 N/A? SW20 Turbo?
|
|
|
Location:
south east - melbourne
Registered:
March 2004
|
|
|
Location:
Canada
Registered:
September 2004
|
|
|
Location:
Brisbane
Registered:
May 2002
|
|
Re: GZ20 Pressure Plate
|
Thu, 02 June 2005 03:17
|
|
I'm 99% sure the 1G clutch is compatible with the 7M-GE clutch. In fact I think all clutches used with a W58 are interchangeable.
|
|
|
Location:
Brisbane
Registered:
May 2002
|
|
Re: GZ20 Pressure Plate
|
Thu, 02 June 2005 03:55
|
|
| Norbie wrote on Thu, 02 June 2005 13:17 |
In fact I think all clutches used with a W58 are interchangeable.
|
MA61's use a 225mm clutch and MA70's use a 240mm clutch, they aren't interchangeable 
Cheers
Wilbo
|
|
|
Location:
Brisbane
Registered:
July 2004
|
|
Re: GZ20 Pressure Plate
|
Thu, 02 June 2005 14:45
|
|
|
I believe KIRK said he is using a clutch and pp [40% xtra clamp] from a 3 litre turbo diesel hilux on his 1ggte.search his posts could garner more info.
|
|
|
Location:
Canada
Registered:
September 2004
|
|
Re: GZ20 Pressure Plate
|
Thu, 02 June 2005 14:46
|
|
"I'm 99% sure the 1G clutch is compatible with the 7M-GE clutch"
Can anyone confirm this?
All the pressure plates described in other threads on this subject, were they really for a gz20 or just a compatible part from anther model?
Thanks,
Ryan
|
|
|
Location:
Cologne, Germany
Registered:
June 2005
|
|
Re: GZ20 Pressure Plate
|
Thu, 02 June 2005 16:25
|
|
|
I think 7M and 1G clutches are not interchangeable. You could use a TRD one, ordering them from Japan is easy. I hope i could help.
|
|
|
Registered:
November 2002
|
|
Re: GZ20 Pressure Plate
|
Fri, 03 June 2005 00:31
|
|
| manmx83 wrote on Thu, 02 June 2005 22:45 |
I believe KIRK said he is using a clutch and pp [40% xtra clamp] from a 3 litre turbo diesel hilux on his 1ggte.search his posts could garner more info.
|
That particular clutch is from a KZN165 3.0 Turbo Diesel Hilux, 2000 - 2004.
I have not yet been able to confirm its size and whether it suits any 1G engine, besides which this clutch kit is likely to cost about $400 from Toyota....aftermarket custom heavy duty is your friend....
|
|
|
