| Author | Topic |
|---|
Location:
Melbourne
Registered:
May 2002
|
|
1g valve spring removal ect
|
Wed, 15 June 2005 03:34
|
 |
Any1 ever removed a 1g valve spring, ie remove the silly bucket and shim arrangement. Is there any trick before i go out and sacrafice a cyl head in the process
Any help would be appreciated
Cheers Adam
|
|
|
Location:
Arthurs Creek, Victoria
Registered:
May 2002
|
|
Re: 1g valve spring removal ect
|
Wed, 15 June 2005 03:43
|
|
a big hammer
|
|
|
Location:
Melbourne
Registered:
May 2002
|
|
Re: 1g valve spring removal ect
|
Wed, 15 June 2005 10:40
|
|
hehe lets try that on your motor 
|
|
|
Location:
Arthurs Creek, Victoria
Registered:
May 2002
|
|
Re: 1g valve spring removal ect
|
Thu, 16 June 2005 00:40
|
|
|
Your the one with all the spare motors. ;-P
|
|
|
I Supported Toymods
Location:
Sydney
Registered:
December 2002
|
|
Re: 1g valve spring removal ect
|
Thu, 16 June 2005 01:59
|
|
We have always used the valve lapping suction cup tool thing to remove the buckets and shims.
Find the WST thread to see the adaptor we made for the spring compressor to let us get the retainers out. (Hint: Witzl's sig has a link)
|
|
|
Location:
sydney
Registered:
April 2005
|
|
Re: 1g valve spring removal ect
|
Thu, 16 June 2005 02:55
|
|
|
No Message Body
|
|
|
Location:
Melbourne
Registered:
May 2002
|
|
Re: 1g valve spring removal ect
|
Thu, 16 June 2005 03:17
|
|
hehe i was shown a similar made tool to be able to get the retainers out, but i didnt want to make a mess of the buckets and shims trying to get em out, will have to source this valve lapping suction cup tool thing so the job can be taken care off. Thanks for the help
|
|
|
Toymods Vice President
Location:
Sydney
Registered:
May 2002
|
|
Re: 1g valve spring removal ect
|
Thu, 16 June 2005 03:23
|
|
I just use a magnet with some race tape over the end so it doesn't scratch the buckets.
As to removing the actual valve springs and retainers etc this is a very interesting looking tool.
|
|
|
