Author | Topic |
I supported Toymods
Location: Australia
Registered: November 2003
|
Desperate - Torque Convertor Bolts.
|
Sat, 25 June 2005 06:05
|
|
I need a couple of TC bolts, they are off a V8 Crown, not sure if anything else uses them.
Like this, is you can post today that would be fantastic.
|
|
|
Location: Melbourne
Registered: November 2004
|
Re: Desperate - Torque Convertor Bolts.
|
Sat, 25 June 2005 11:07
|
|
try toyota. list price is a about $1.95 id send u my spare 1 but its not worth posting
|
|
|
I supported Toymods
Location: Australia
Registered: November 2003
|
Re: Desperate - Torque Convertor Bolts.
|
Sun, 26 June 2005 03:09
|
|
andrew_mx83 wrote on Sat, 25 June 2005 19:07 | try toyota. list price is a about $1.95 id send u my spare 1 but its not worth posting
|
If I could get a part number that would be awesome.
But walking into Toyota and asking for Torque Convertor bolts for a UZS131 Crown just isn't going to happen.
They'll just look at me like stunned mullets.
Been there, done that.
I'll see if I can dig up someones EPC
|
|
|
Location: Melbourne
Registered: June 2003
|
Re: Desperate - Torque Convertor Bolts.
|
Mon, 27 June 2005 08:44
|
|
They like pretty identical to the 6 I have lying around off my MZ21, looks like an 8mm, which about 10mm of thread, which I guess would make the part number
32101A, which then translates to 90119-09009 or 90119-09010
http://www.cygnusx1.net/supra/library/EPC/MKIII/29 1220/3502_1.html
or I could just chuck these in an envelope and send them up and see if they help.
Justin
|
|
|
I supported Toymods
Location: Australia
Registered: November 2003
|
Re: Desperate - Torque Convertor Bolts.
|
Mon, 27 June 2005 08:46
|
|
I've got 3 coming in the next couple of days.
Cheers anyway.
(btw, the width of the thread was about 8.8-9mm. Only bolt on the whole car like this)
I tried torque converter bolt off an MS123 Crown, they were different.
|
|
|