Author | Topic |
Location: Forbes
Registered: June 2005
|
|
|
Location: South Australia
Registered: May 2004
|
Re: St184 Celica Project
|
Sun, 03 July 2005 16:28
|
|
looking good!
How does the 5s go with the old tvis 3sge head on there??
|
|
|
Location: Forbes
Registered: June 2005
|
Re: St184 Celica Project
|
Sun, 03 July 2005 21:54
|
|
Not sure yet m8! Haven't hit the key yet. will let you know.
|
|
|
Location: Hobart, Tasmania
Registered: January 2005
|
Re: St184 Celica Project
|
Sun, 03 July 2005 23:19
|
|
Cool project. I'll be following the progress.
I drive a stock 92 ST184, so I'll be interested to hear how you go restoring and upgrading this one.
|
|
|
Location: Epping, Sydney
Registered: April 2003
|
Re: St184 Celica Project
|
Mon, 04 July 2005 02:41
|
|
the 5SFE with the gen 1 3SGE head... verrrrrrry interesting.. I know a certain "RWDBoy" on these forums who wanted to do that...
super keen to see how it turns out!
onya mate
Rob
|
|
|
Location: QLD, Gold Coast
Registered: February 2004
|
Re: St184 Celica Project
|
Mon, 04 July 2005 06:49
|
|
so will this be the first 5sge?
|
|
|
Location: Forbes
Registered: June 2005
|
Re: St184 Celica Project
|
Mon, 04 July 2005 08:33
|
|
5Sge yes that was the plan! The 5s & 3s blocks looked to me to be very similar so i had a brain wave to put 3sge head on the 2.2'being new to this type of thing I got a 5sfe VRS set first and put the head gasket on the head It didn't look right Combustion rings etc looked ok but the water ports were not good so I went for the 3sge VRS kit put the headgasket on the block as a template marked the block and drilled the extra water ports. easy peasy!! But I was a dickhead I near made a boo boo I had the enging together put the tbelt on and proceded to turn the enging over by hand after three turns it locked up fark these things have valves like pennys on sticks lucky no bend!! The bottom crank gear is one or two teeth smaller on the 3sge to the 5sfe!!! one to keep in mind if ever ya give this one a shot!
|
|
|