| Author | Topic |
|---|
Club President
I supported Toymods
Location:
Sydney
Registered:
May 2002
|
 1971/72 TA22 Rolling Shell
|
Mon, 09 December 2002 01:15
|
 |
Ok the back yard is getting crowded so It looks like I will have to off load my other TA22. It is a straight but in need of attention 1St release TA22 (ie flat tail lights, floor mount fuel tank etc) - (Rear tail lights are missing)
It is a rolling shell only, has doors and bonnet and I think both Guards are there. All need repairs but the chassis is straight. It would make an ideal basis for Historic class racing or can be restored for street use.
Open to offers or I'll be forced to gut it and dump the body 
0416 181 284
|
|
|
I supported Toymods
Location:
Toodyay, WA
Registered:
July 2002
|
|
Re: 1971/72 TA22 Rolling Shell
|
Mon, 09 December 2002 09:34
|
|
hey rod,
do you have the cross members (both engine and gearbox), and what about a 2T + T50?
|
|
|
Club President
I supported Toymods
Location:
Sydney
Registered:
May 2002
|
|
Re: 1971/72 TA22 Rolling Shell
|
Mon, 09 December 2002 13:21
|
|
Cam,
Xmembers are here  but I don't have a complete 2T and the only T50 gearbox I have is actually up the coast at Admas Sisters place ! Gotta go get that out of her garage  Its only been there 12 months !
|
|
|
Location:
Melbourne
Registered:
June 2002
|
|
Re: 1971/72 TA22 Rolling Shell
|
Tue, 10 December 2002 03:50
|
|
|
will you sell the floor mount fuel tank seperate? can i put this in a 74 ta22?
|
|
|
Club President
I supported Toymods
Location:
Sydney
Registered:
May 2002
|
|
Re: 1971/72 TA22 Rolling Shell
|
Tue, 10 December 2002 03:58
|
|
Skees,
Floor mount tank would be $50 if you want it. They do not bolt straight into a 74 model you need to make up brakets and the like to hold it in place.
Dave has one in his 76 model and it works a treat but it took some effort. Been considering doing the same to mine actually.
|
|
|
I supported Toymods
Banned User
Location:
Brisbane
Registered:
May 2002
|
|
Re: 1971/72 TA22 Rolling Shell
|
Tue, 10 December 2002 08:33
|
|
|
Hey you dont happen to have any photos of the fuel filler on the inside of the boot! I need to figure out how to put a filler on the back of my 74 model to attach to the tank under the floor!
|
|
|
Location:
Newcastle
Registered:
September 2002
|
 Re: 1971/72 TA22 Rolling Shell
|
Tue, 10 December 2002 10:06
|
|
|
How much would you sell me the front stone guard thingy + the radiator suport(the bit that unbolts)? im in need of both of these parts to get my TA22 blue sliped
|
|
|
Club President
I supported Toymods
Location:
Sydney
Registered:
May 2002
|
|
Re: 1971/72 TA22 Rolling Shell
|
Tue, 10 December 2002 11:48
|
|
Fly PSI
Dude you sure it would be worth a Trip to Sydney ?? But hey 
Radiator Support Panel - $5
Front Apron - $40
I gotta go to My mums to get those bits as the 72 is missing them You gotta pic em up tho theres no way a front apron would make it to Newcastle via post without being stuffed and they are to hard to get in good nick !
If you actually wanted the stone Guard drip tray bit that sits under the engine bay and not the front apron I have one here thats a bit twisted you can have it for free if you want it !
Cool 1,
Its Pissing down rain outside so remind me once it stops and I'll clear the boot and get a pic or two for you
|
|
|
I supported Toymods
Banned User
Location:
Brisbane
Registered:
May 2002
|
|
Re: 1971/72 TA22 Rolling Shell
|
Tue, 10 December 2002 11:52
|
|
|
Thats great mate! I'll nag you a bit later in the week
|
|
|
Location:
Newcastle
Registered:
September 2002
|
|
Re: 1971/72 TA22 Rolling Shell
|
Tue, 10 December 2002 12:01
|
|
|
ill be down that way just after christmas, so i will get the parts then if thats possible. i will also grab the stone guard drip tray aswell. it should fit my car, it has a 2TGEU?
|
|
|
Location:
Melbourne
Registered:
June 2002
|
|
Re: 1971/72 TA22 Rolling Shell
|
Wed, 11 December 2002 01:01
|
|
|
If i could get some pics of the tank and filler that would be great. Ta
|
|
|
Location:
Newcastle
Registered:
September 2002
|
|
Re: 1971/72 TA22 Rolling Shell
|
Wed, 11 December 2002 10:25
|
|
|
Im also after a bonnet catch and the cable aswell, do you have these parts? if so then how much?
|
|
|
I supported Toymods
Banned User
Location:
Brisbane
Registered:
May 2002
|
|
Re: 1971/72 TA22 Rolling Shell
|
Wed, 11 December 2002 10:47
|
|
|
Hey Rod, I'm interested in the handbrake assembly if it is in good nick! It should fit the later 74 model?
|
|
|
Club President
I supported Toymods
Location:
Sydney
Registered:
May 2002
|
|
Re: 1971/72 TA22 Rolling Shell
|
Thu, 12 December 2002 04:10
|
|
Cool 1,
The 71/72 Handbrake is different but what bits did you want I prolly have em there anyway.
|
|
|
I supported Toymods
Banned User
Location:
Brisbane
Registered:
May 2002
|
|
Re: 1971/72 TA22 Rolling Shell
|
Thu, 12 December 2002 08:05
|
|
I really just need the leaver/handle! Mine is all twisted!
Whats the difference between the 71,72 and the 74 models? Which is the better design?
Oh, and hows those photos going?
|
|
|
Location:
Sydney
Registered:
May 2002
|
|
Re: 1971/72 TA22 Rolling Shell
|
Thu, 12 December 2002 08:13
|
|
Hey Rod mate
How much for a passenger Door ??
Straight ?
Rust free ??
Ta
Mani
|
|
|
Location:
Newcastle
Registered:
September 2002
|
|
Re: 1971/72 TA22 Rolling Shell
|
Fri, 13 December 2002 11:54
|
|
| FLY PSI wrote on Wed, 11 December 2002 21:25 |
Im also after a bonnet catch and the cable aswell, do you have these parts? if so then how much?
|
Rod, Are these parts availble? Let me know please
|
|
|
Club President
I supported Toymods
Location:
Sydney
Registered:
May 2002
|
|
Re: 1971/72 TA22 Rolling Shell
|
Sun, 15 December 2002 04:22
|
|
FlyPSI,
Mate I'll check my Shed at Mums place tonight for the cable. Catch is there fort sure
Since your chasing a few bits mate Might be best if you email me your complete wish list then I can pick it all out for you and let you know how much.
rod@toymods.org.au
Mani,
Mate would you beleive the passenger door is actually in good nick ! Straight and no rust bubbles Hows $100 sound ??
Cool 1,
Definatly have the handbrake itself ! Hassel me for pics of the two different types so you can let me know which one you want !
Haven't forgotten the Feul tank pics just gotta get 5 minutes
|
|
|
Location:
Newcastle
Registered:
September 2002
|
|
Re: 1971/72 TA22 Rolling Shell
|
Sun, 15 December 2002 06:11
|
|
|
I'll get a list to you tomorrow night, I will go through all my parts to find out what i dont have(Need) tonight.
|
|
|
I supported Toymods
Banned User
Location:
Brisbane
Registered:
May 2002
|
|
Re: 1971/72 TA22 Rolling Shell
|
Sun, 15 December 2002 07:40
|
|
Thanks Rod, It would be great if you can get me pics of the 2 different hand brakes and of the fuel filler!
You can email them to me at ipirate@iprimus.com.au
Thanks mate.
|
|
|
Club President
I supported Toymods
Location:
Sydney
Registered:
May 2002
|
|
Re: 1971/72 TA22 Rolling Shell
|
Sun, 15 December 2002 23:31
|
|
FLYPSI,
Mate Cable and Catch are both there Will wait for your list and let you know asap.
Cool 1,
Found the camera so next night or so I'll get that filler neck pic. 71/72 Handbrake will take some finding !! I know the bastard is there somewhere. They are basicaklly chrome instead of black on the steel part !
|
|
|
I supported Toymods
Banned User
Location:
Brisbane
Registered:
May 2002
|
|
Re: 1971/72 TA22 Rolling Shell
|
Mon, 16 December 2002 09:43
|
|
|
No worries mate! Thanks for spending the time for me!
|
|
|
Club President
I supported Toymods
Location:
Sydney
Registered:
May 2002
|
|
Re: 1971/72 TA22 Rolling Shell
|
Tue, 17 December 2002 04:18
|
|
Cool 1
Mate heres your pics
and
Hope thats what you wanted
|
|
|
I supported Toymods
Banned User
Location:
Brisbane
Registered:
May 2002
|
|
Re: 1971/72 TA22 Rolling Shell
|
Tue, 17 December 2002 10:31
|
|
|
Thanks for them pics mate! There isn't much difference in those handbrake assembly's at all! How much do you want for the black one? As long as its not twisted like mine!
|
|
|
Location:
Melbourne
Registered:
June 2002
|
|
Re: 1971/72 TA22 Rolling Shell
|
Wed, 18 December 2002 00:08
|
|
thanx for the pic, but im still unsure where the tank sits and it shape? Is it where the spare wheel is in 73- ta22's and if so where do you put the spare wheel, I spose a pic of the actual tank would be great thanks
Cam
|
|
|
Club President
I supported Toymods
Location:
Sydney
Registered:
May 2002
|
|
Re: 1971/72 TA22 Rolling Shell
|
Wed, 18 December 2002 01:16
|
|
Cool 1,
Mate postage will be your biggest hassel.
Hows $10 sound and I'll drop it off the car tonight.
|
|
|
I supported Toymods
Banned User
Location:
Brisbane
Registered:
May 2002
|
|
Re: 1971/72 TA22 Rolling Shell
|
Wed, 18 December 2002 07:06
|
|
$10 sounds great! Postage should'nt be too bad but we'll see!
I'll send you an email with my details
|
|
|
