| Author | Topic |
|---|
Location:
Brisbane
Registered:
May 2004
|
|
|
Location:
Brisbane
Registered:
May 2004
|
|
Re: Jaycar's Steel Mate Central Locking & Keyless Entry
|
Fri, 08 July 2005 21:44
 
|
 |
Here's the instruction for the Central Locking Kit
I dont have the one for the keyless entry
the keyless entry system has 9 pin module/wiring
Red is +ve
Black is earth
white and the brown one says for alarm
purple for indicator lights
so Im left with Yellow, Yellow/Black, Green, Blue
I connected Blue & green to central locking kit's master actuator blue & green wire and its just making clicking noise and not doing anything.
I dont have any more info as the instrcution is pretty stupidly unclear
Please help.
Thanks
|
|
|
Location:
Brisbane
Registered:
May 2004
|
|
Re: Jaycar's Steel Mate Central Locking & Keyless Entry
|
Sat, 09 July 2005 04:16
|
|
Scanned Instruction of the Keyless Entry System
If anyone can understand it that would be great help
thanks
|
|
|
I supported Toymods
Banned User
Location:
Brisbane
Registered:
May 2002
|
|
Re: Jaycar's Steel Mate Central Locking & Keyless Entry
|
Sat, 09 July 2005 04:54
|
|
|
If you get stuck, you could pop in here and i'll see if I can help. But i'm a bit unwell at the moment so my brain isn't working.
|
|
|
Location:
brisbane
Registered:
December 2004
|
|
|
I supported Toymods
Location:
Epping, Sydney
Registered:
May 2002
|
|
Re: Jaycar's Steel Mate Central Locking & Keyless Entry
|
Sat, 09 July 2005 07:00
|
|
hehehe "unwell".
that's the term we use when one of our clients goes off the rails and may have to be committed to hospital
|
|
|
I supported Toymods
Banned User
Location:
Brisbane
Registered:
May 2002
|
|
Re: Jaycar's Steel Mate Central Locking & Keyless Entry
|
Sat, 09 July 2005 07:08
|
|
| draven wrote on Sat, 09 July 2005 17:00 |
hehehe "unwell".
that's the term we use when one of our clients goes off the rails and may have to be committed to hospital
|
I think I got Ross River Fever 
|
|
|
Location:
Melbourne
Registered:
May 2002
|
|
Re: Jaycar's Steel Mate Central Locking & Keyless Entry
|
Sat, 09 July 2005 08:37
|
|
| Cool1 wrote on Sat, 09 July 2005 17:08 |
| draven wrote on Sat, 09 July 2005 17:00 |
hehehe "unwell".
that's the term we use when one of our clients goes off the rails and may have to be committed to hospital
|
I think I got Ross River Fever
|
too much unprotected frog love'n 
|
|
|
I supported Toymods
Banned User
Location:
Brisbane
Registered:
May 2002
|
|
Re: Jaycar's Steel Mate Central Locking & Keyless Entry
|
Sat, 09 July 2005 08:40
|
|
| Allan wrote on Sat, 09 July 2005 18:37 |
| Cool1 wrote on Sat, 09 July 2005 17:08 |
| draven wrote on Sat, 09 July 2005 17:00 |
hehehe "unwell".
that's the term we use when one of our clients goes off the rails and may have to be committed to hospital
|
I think I got Ross River Fever
|
too much unprotected frog love'n
|
Crap, I think you might be onto something
|
|
|
Location:
Bottom of the hill, Sydney
Registered:
April 2004
|
|
Re: Jaycar's Steel Mate Central Locking & Keyless Entry
|
Sat, 09 July 2005 08:57
|
|
Connect it like this,
Yellow & Yellow/black from keyless entry to black on central locking.
Green & blue from keyless entry go to brown & white on cenral locking. Connect the green to brown and blue to white and check to see if it is locking and unlocking correctly, ie press button one on remote and doors lock, press button two on remote and doors unlock. If it is back to front connect the green to white and blue to brown.
Good luck.
|
|
|
Toymods Social Secretary
Location:
Sydney
Registered:
July 2002
|
|
Re: Jaycar's Steel Mate Central Locking & Keyless Entry
|
Sun, 10 July 2005 04:56
|
|
NO!!
connecting the yellow/yellow black to the black wire of the central locking relay thing caused feedback and other wierd problems when i tried it.
Witzl's Experienced Gheycar Instructions
From the remote central locking box:
# yellow and yellow/black - TO EARTH
# Green and blue wires are now neg trigger outputs.
Central locking relay box
# Connect brown and white to blue and green. Switch around if the unlock button locks the car and the lock button unlocks it.
All done 
|
|
|
Location:
Bottom of the hill, Sydney
Registered:
April 2004
|
|
Re: Jaycar's Steel Mate Central Locking & Keyless Entry
|
Sun, 10 July 2005 07:51
|
|
According to the diagram for the central locking the black wire is connected to earth.
I have no experience with the jaycar keyless entry system though so I would do as THE WITZL suggested and connect the yellow and yellow/black wires to earth.
|
|
|
Location:
Brisbane
Registered:
May 2004
|
|
Re: Jaycar's Steel Mate Central Locking & Keyless Entry
|
Sun, 10 July 2005 21:54
|
|
thanks everyone!
I managed to fix it saturday few minutes after I posted this.
Yes Yellow & Yellow/Black connects to Earth or the black wire as the black wire connects to earth anyway.
Blue and green from the keyless module connects to brown and white.
Its working great now!
now one more question....
How do I connect the indicator lights to flash when I unlock/lock the doors?
I tried connecting the purple wire to the hazard lights wires and that didnt work.
Do I have to get 2 diodes and connect each to left & right indicator wires then join it to the purple wire?
which diode exactly do I get?
thanks everyone again.
|
|
|
I supported Toymods
Banned User
Location:
Brisbane
Registered:
May 2002
|
|
Re: Jaycar's Steel Mate Central Locking & Keyless Entry
|
Sun, 10 July 2005 22:09
|
|
|
1N4001 or 1N4004 or anything similar.
|
|
|
Location:
Brisbane
Registered:
May 2004
|
|
|
I supported Toymods
Banned User
Location:
Brisbane
Registered:
May 2002
|
|
Re: Jaycar's Steel Mate Central Locking & Keyless Entry
|
Sun, 10 July 2005 22:42
|
|
|
No it doesnt matter. Just needs to be a high power diode.
|
|
|
