| Author | Topic |
|---|
Location:
victoria
Registered:
July 2005
|
|
wheels for an st141 corona
|
Tue, 12 July 2005 12:21
|
 |
|
hey guys.. i was just wondering what size wheels and what offset would u recommend for my st141 corona..it will be lowered a fair bit soon.. what profile tyre should i run..thanks for your help
|
|
|
Location:
victoria
Registered:
July 2005
|
|
Re: wheels for an st141 corona
|
Tue, 12 July 2005 12:29
|
|
also im rebuilding a 22r motor for my car and was wondering if the turbo manifold off the toyota four runner fits onto my motor..if it does are they hard to get your hands on??
thanks
|
|
|
Location:
Brisbane
Registered:
May 2002
|
|
Re: wheels for an st141 corona
|
Tue, 12 July 2005 23:41
|
|
The size of wheel/tyre used depends entirely on your budget and what you're using the car for. Personally I wouldn't go larger than 15" diameter unless you need more roomo for big brakes, and 7" wide with 205 tyres is probably about as far as you can go with stock guards. The profile should be chosen to keep rolling diameter close to stock.
A 22R-TE manifold will fit but (a) it's a piece of p00 and (b) they're a US-only item so you're not going to find one.
|
|
|
Location:
Campbelltown
Registered:
November 2003
|
|
Re: wheels for an st141 corona
|
Tue, 12 July 2005 23:54
|
|
I have bluebird trx rims on my rona, need spacers to bring them out a bit, my uncle has a set of 15x8 that he was gonna put on the rona as well but he sold it too me, they needed spacers as well and also to roll the guards a bit not much.
There is plenty of room out back for decent tyres, on a 7inch wide rim something like a 215/55/15 would be pretty close to standard rolling diameter.
|
|
|
Location:
Sydney
Registered:
September 2003
|
|
Re: wheels for an st141 corona
|
Wed, 13 July 2005 06:34
|
|
|
Get some dished simmons wheels, but they probably cost more than the car.
|
|
|
