Author | Topic |
Location: Sydney
Registered: February 2003
|
MA61 and RA60 parts
|
Fri, 15 July 2005 01:24
|
|
MA61
aircon button with wiring $5
http://members.optusnet.com.au/christopha/ac_butto n1.jpg
aircon control knobs (5) - good condition $2
http://members.optusnet.com.au/christopha/various_ bits1.jpg
cigarette lighter $2
http://members.optusnet.com.au/christopha/cigg_lig hter1.jpg
dash light brightness knob - good condition $2
http://members.optusnet.com.au/christopha/various_ bits1.jpg
driver side fuse panel door (black) - good condition $2
http://members.optusnet.com.au/krix1/fuse_panel1.j pg
driver side kick panel with fuse panel door, fuse puller and sticker (blue) - good condition $10
http://members.optusnet.com.au/krix1/driver_kick1. jpg
driver side lower aircon duct (the one in the foot well) $5
http://members.optusnet.com.au/krix1/aircon_duct1. jpg
engine bay hole cover thing near the battery - good condition $2
http://members.optusnet.com.au/christopha/hole_cov er.jpg
front bar urethane insert $5
http://members.optusnet.com.au/krix1/frontbar_inse rt.jpg
front console (blue) - hacked, gear boot tabs broken and fixed, pretty shit $free
http://members.optusnet.com.au/krix1/console4.jpg
http://members.optusnet.com.au/krix1/console5.jpg
http://members.optusnet.com.au/krix1/console7.jpg
http://members.optusnet.com.au/krix1/console8.jpg
front console (blue) - two small holes, all gear boot tabs intact $5
http://members.optusnet.com.au/krix1/console1.jpg
http://members.optusnet.com.au/krix1/console2.jpg
http://members.optusnet.com.au/krix1/console3.jpg
http://members.optusnet.com.au/krix1/console6.jpg
front indicator housings (pair) - both have cracks, but useable $5
http://members.optusnet.com.au/christopha/ma61_ind icator1.jpg
http://members.optusnet.com.au/christopha/ma61_ind icator2.jpg
http://members.optusnet.com.au/christopha/ma61_ind icator3.jpg
http://members.optusnet.com.au/christopha/ma61_ind icator4.jpg
http://members.optusnet.com.au/christopha/ma61_ind icator5.jpg
front right flare (silver) - front edge rebuilt in fiberglass, needs work, looks ok $20
http://members.optusnet.com.au/krix1/flare1.jpg
http://members.optusnet.com.au/krix1/flare2.jpg
front seat belt surround panel (blue) - good condition $5
http://members.optusnet.com.au/krix1/seatbelt_pane l1.jpg
front speaker grilles (blue) - broken lower clips $2
http://members.optusnet.com.au/krix1/speaker_grill es1.jpg
http://members.optusnet.com.au/krix1/speaker_grill es2.jpg
front visors (pair) (grey) - left one is shit and missing mirror, right one is good $5
http://members.optusnet.com.au/krix1/visors1.jpg
front wheel splash guards (pair) - average condition $10
http://members.optusnet.com.au/krix1/splashguards1 .jpg
front windscreen metal side strips - good condition $5
http://members.optusnet.com.au/krix1/windscreen_st rip1.jpg
front windshield outer vent grille piece things - good condition $5
http://members.optusnet.com.au/christopha/windscre en_grilles.jpg
interior b pillar panels (blue) - good condition $10
http://members.optusnet.com.au/krix1/bpillar_panel s1.jpg
interior handle things (grey) - fair condition, need a good clean $2
http://members.optusnet.com.au/krix1/handles.jpg
interior rear view mirror (blue) - fair condition $5
http://members.optusnet.com.au/christopha/rearview _mirror.jpg
interior roof light (grey) - fair condition, works $5
http://members.optusnet.com.au/christopha/interior _light.jpg
lower dash piece driver side (blue) - tab broken off on one corner, otherwise good condition $10
http://members.optusnet.com.au/krix1/driver_lower_ dash1.jpg
http://members.optusnet.com.au/krix1/driver_lower_ dash2.jpg
lower dash piece passenger side with speaker and sub (blue) - one screw hole has the corner broken off, otherwise good condition $20
http://members.optusnet.com.au/krix1/pass_lower_da sh1.jpg
http://members.optusnet.com.au/krix1/pass_lower_da sh2.jpg
lower front seatbelt anchor point panel things...? (blue)(pair) - fair condition, few scratches $5
http://members.optusnet.com.au/krix1/lower_sill1.j pg
passenger side kick panel (blue) - good condition $10
http://members.optusnet.com.au/krix1/pass_kick1.jp g
rear beaver panel - fair condition, some of the studs have broken off $10
http://members.optusnet.com.au/krix1/beaver2.jpg
http://members.optusnet.com.au/krix1/beaver1.jpg
rear bumper bar, bracket, and number plate lights - good condition $35
http://members.optusnet.com.au/krix1/rearbar1.jpg
http://members.optusnet.com.au/krix1/rearbar2.jpg
http://members.optusnet.com.au/krix1/rearbar3.jpg
rear bumper metal frame - good condition $20
http://members.optusnet.com.au/krix1/rear_metal_ba r1.jpg
http://members.optusnet.com.au/krix1/rear_metal_ba r2.jpg
rear c pillar interior panels (blue) - good condition $15
http://members.optusnet.com.au/krix1/cpillar_panel s1.jpg
rear lower beaver panel (silver-blue) - two small dents, otherwise good $5
http://members.optusnet.com.au/krix1/lower_beaver1 .jpg
rear lower side panel with compartments (pair) (blue) - good condition $25
http://members.optusnet.com.au/krix1/rear_side_pan el1.jpg
http://members.optusnet.com.au/krix1/rear_side_pan el2.jpg
http://members.optusnet.com.au/krix1/rear_side_pan el3.jpg
http://members.optusnet.com.au/krix1/rear_side_pan el4.jpg
rear seat latch loops - need spares? haha $5
http://members.optusnet.com.au/christopha/seat_lat ches.jpg
rear shock tower cover (blue) - good condition $2
http://members.optusnet.com.au/christopha/shock_to wer_cover.jpg
rear washer fluid filler/door (blue) - good condition $5
http://members.optusnet.com.au/krix1/rear_washer_d oor1.jpg
RHS tail light housing - good condition $20
http://members.optusnet.com.au/christopha/ma61_tai llight1.jpg
rubber radio surround (black) - small holes in each corner, otherwise good $10
http://members.optusnet.com.au/krix1/radio_surroun d2.jpg
http://members.optusnet.com.au/krix1/radio_surroun d3.jpg
seatbelts and brackets and bolts and shit (blue) $various
http://members.optusnet.com.au/christopha/seatbelt s.jpg
sill panel (blue) - good condition $5
http://members.optusnet.com.au/krix1/sill_panel1.j pg
spare tyre bolt thing - good condition $2
http://members.optusnet.com.au/christopha/spare_bo lt.jpg
speedo surround (blue) - has three small holes, otherwise good $15
http://members.optusnet.com.au/krix1/speedo_surrou nd1.jpg
http://members.optusnet.com.au/krix1/speedo_surrou nd2.jpg
steering column panels upper and lower (blue) - good condition $20
http://members.optusnet.com.au/krix1/upper_steerin g_column1.jpg
http://members.optusnet.com.au/krix1/lower_steerin g_column1.jpg
steering wheel with extra horn button cover (blue) - needs a good clean, no brass contact ring, not hard to make one though $5
http://members.optusnet.com.au/krix1/steeringwheel 1.jpg
tow bar with tow ball and trailer brake light wiring connector - good condition $25
http://members.optusnet.com.au/krix1/towbar1.jpg
under dash panel driver side with two switches (black) - good condition $10
http://members.optusnet.com.au/krix1/driver_under_ dash1.jpg
under dash panel passenger side (black) - good condition $10
http://members.optusnet.com.au/krix1/pass_under_da sh1.jpg
unknown rear splash guard (black) - average condition $5
http://members.optusnet.com.au/krix1/rear_splash1. jpg
http://members.optusnet.com.au/krix1/rear_splash2. jpg
various interior roof lining edge strips (blue) $various
http://members.optusnet.com.au/krix1/various_strip s.jpg
various outer door/quarter mouldings $various
http://members.optusnet.com.au/krix1/various_strip s.jpg
wiper arms - little bit of surface rust, even comes with old wiper blades! $10
http://members.optusnet.com.au/christopha/wiper_ar ms1.jpg
wiper motor and pushrods - good condition $30
http://members.optusnet.com.au/christopha/wiper_mo tor1.jpg
http://members.optusnet.com.au/christopha/wiper_ro d1.jpg
RA60
RA60 console with lid no ashtray (blue) - good condition, lid is mouldy and needs a clean $15
http://members.optusnet.com.au/krix1/console9.jpg
http://members.optusnet.com.au/krix1/console10.jpg
http://members.optusnet.com.au/krix1/console_lid2. jpg
http://members.optusnet.com.au/krix1/console_lid3. jpg
[Updated on: Wed, 23 November 2005 06:40]
|
|
|
Location: Hobart, Tas
Registered: May 2002
|
Re: CHRIS's MA61, RA60 and S13 sale, heaps of shit!
|
Fri, 15 July 2005 01:46
|
|
Interested in:
external b-pillars
1x passenger side seatbelt latch recipticle thingy if in good condition (mine actually *broke* this week!)
|
|
|
Location: Sydney
Registered: February 2003
|
Re: CHRIS's MA61, RA60 and S13 sale, heaps of shit!
|
Fri, 15 July 2005 10:21
|
|
do you mean the thing that the buckle buckles into? the black thing with the orange button?
|
|
|
Location: Hobart, Tas
Registered: May 2002
|
|
|
Location: Hobart, TAS
Registered: October 2004
|
|
|
Location: Sydney
Registered: February 2003
|
Re: CHRIS's MA61, RA60 and S13 sale, heaps of shit!
|
Fri, 15 July 2005 11:16
|
|
Stefan wrote on Fri, 15 July 2005 20:46 |
STR8 2.8 wrote on Fri, 15 July 2005 20:21 | do you mean the thing that the buckle buckles into? the black thing with the orange button?
|
Yes, that's it Blue with an orange button in my case, I think I saw a bunch of miscellaneous seat belt parts in one of those pics.
EDIT: Also interested in the rear vent pieces with pipes.
|
rightio ill do the exeterior b-pillar panels and one seatbelt thing for $30 + postage
|
|
|
Location: Sydney
Registered: February 2003
|
Re: CHRIS's MA61, RA60 and S13 sale, heaps of shit!
|
Fri, 15 July 2005 11:22
|
|
negative boost wrote on Fri, 15 July 2005 20:56 | Shotgun:
Consol with all switches
Front Splash Guards
Indicator Spacer thingys
lower front seatbelt anchor point panel things...? (blue)(pair)
rear lower side panel with compartments - need right side only
Shock Tower Covers
spare tyre bolt thing
unstitched gear boot with wire (blue)
I think thats it...
How much?
|
i can do the lot of that for $50 plus postage, but i only have one of the shock tower covers.
|
|
|
Location: Hobart, TAS
Registered: October 2004
|
Re: CHRIS's MA61, RA60 and S13 sale, heaps of shit!
|
Fri, 15 July 2005 11:44
|
|
Sorry i also need the rear beaver panel too.
Stefan, do you want to ship our stuff together and half the shipping costs?
|
|
|
Location: Sydney
Registered: February 2003
|
Re: CHRIS's MA61, RA60 and S13 sale, heaps of shit!
|
Fri, 15 July 2005 11:54
|
|
can do teh rear vent pieces for $15 (pair)
rear beaver for $15
you do realise there are studs broken off the back, i think the outer edge ones are gone, theres like 4 missing, but it still holds in fine.
|
|
|
Location: Hobart, TAS
Registered: October 2004
|
|
|
Location: Sydney
Registered: February 2003
|
Re: CHRIS's MA61, RA60 and S13 sale, heaps of shit!
|
Fri, 15 July 2005 13:12
|
|
negative boost wrote on Fri, 15 July 2005 22:02 | hmm, i might not then. I really should stop spending so much money...
I might just cut a few things back aswell, i got a bit carried away... Sorry, just trying to save some money.
New list:
Indicator Spacer thingys
lower front seatbelt anchor point panel things...? (blue)(pair)
spare tyre bolt thing
unstitched gear boot with wire (blue)
edit, i need to check if i need the RH front splash gaurd. Forgotten if mine was damaged/lost, will check tommorow.
|
ok ill do that lot for $20, plus $5 for the splash guard if you want it
|
|
|
Location: Hobart, Tasmania
Registered: June 2005
|
Re: CHRIS's MA61, RA60 and S13 sale, heaps of shit!
|
Fri, 15 July 2005 13:32
|
|
sam, i'm pretty sure i've still got...
lower front seatbelt anchor point panel things...? (blue)(pair)
spare tyre bolt thing
and the shock tower cover things, if you're talking about the rear blue cone bits
so yeah, if you want them, they're yours for free
|
|
|
Location: Sydney
Registered: February 2003
|
Re: CHRIS's MA61, RA60 and S13 sale, heaps of shit!
|
Fri, 15 July 2005 13:50
|
|
supré-mkii wrote on Fri, 15 July 2005 23:32 | sam, i'm pretty sure i've still got...
lower front seatbelt anchor point panel things...? (blue)(pair)
spare tyre bolt thing
and the shock tower cover things, if you're talking about the rear blue cone bits
so yeah, if you want them, they're yours for free
|
shit, dont hold back.
thanks
|
|
|
Location: Ballarat, Victoria
Registered: March 2003
|
Re: CHRIS's MA61, RA60 and S13 sale, heaps of shit!
|
Fri, 15 July 2005 13:56
|
|
chris-
ill take:
the washer bottle
any bumper bar mounting brackets that hold the number plates on- my bumper came seperate one one of my supras and im missing half the shit...
and any door plugs you have
cheeers mate
ryley
|
|
|
Location: Sydney
Registered: February 2003
|
Re: CHRIS's MA61, RA60 and S13 sale, heaps of shit!
|
Fri, 15 July 2005 23:11
|
|
Evil_Foetus wrote on Fri, 15 July 2005 23:56 | chris-
ill take:
the washer bottle
any bumper bar mounting brackets that hold the number plates on- my bumper came seperate one one of my supras and im missing half the shit...
and any door plugs you have
cheeers mate
ryley
|
rightio $10 for the bottle
but i dont think i have anything that mounts the numberplate. im not even sure how the numberplate is supposed to be mounted. mine was always either screwed into the bar or riveted dodgy like to the bracket.
ill see what door plugs i can dig up
|
|
|
I supported Toymods
Location: Epping, Sydney
Registered: May 2002
|
Re: CHRIS's MA61, RA60 and S13 sale, heaps of shit!
|
Sat, 16 July 2005 00:55
|
|
argh
half a day too late for the washer bottle
|
|
|
Location: Ballarat, Victoria
Registered: March 2003
|
Re: CHRIS's MA61, RA60 and S13 sale, heaps of shit! now with Prices!
|
Sun, 17 July 2005 03:43
|
|
alright done, ill talk to you soon chris and we'll work it out
ive got one with a smashed top if you want it greg?
|
|
|
I supported Toymods
Location: Epping, Sydney
Registered: May 2002
|
Re: CHRIS's MA61, RA60 and S13 sale, heaps of shit! now with Prices!
|
Sun, 17 July 2005 04:17
|
|
that's ok, I've got one with a huge split down the side
|
|
|
Location: Hobart, TAS
Registered: October 2004
|
Re: CHRIS's MA61, RA60 and S13 sale, heaps of shit! now with Prices!
|
Sun, 17 July 2005 04:36
|
|
Okay, i've reduced my list from like 10 to 2, sorry
All i want now are the following 2 items
Unstitched gear boot with wire (blue)
Indicator spacer thingys
I think that comes to $7!
Should be easy enough to stash in a big envolope.
|
|
|
Location: Sydney
Registered: February 2003
|
Re: CHRIS's MA61, RA60 and S13 sale, heaps of shit! now with Prices!
|
Sun, 17 July 2005 09:17
|
|
yeh thats easy.
let me know a postcode and ill work out postage
|
|
|
Location: Hobart, Tas
Registered: May 2002
|
Re: CHRIS's MA61, RA60 and S13 sale, heaps of shit! now with Prices!
|
Mon, 18 July 2005 00:40
|
|
What condition is the seatbelt thingy? Being a safety item, I only want it if it's mint .
If you want more stuff, negative boost, I'm happy to share postage.
|
|
|
Location: Sydney
Registered: February 2003
|
Re: CHRIS's MA61, RA60 and S13 sale, heaps of shit! now with Prices!
|
Mon, 18 July 2005 01:37
|
|
its in pretty good condition, the stalk has no marks. its not bent.
the plastic has a few nicks nothing really noticeable, i can take close up photos if you like.
|
|
|
Location: Hobart, Tas
Registered: May 2002
|
Re: CHRIS's MA61, RA60 and S13 sale, heaps of shit! now with Prices!
|
Mon, 18 July 2005 06:30
|
|
STR8 2.8 wrote on Mon, 18 July 2005 11:37 | its in pretty good condition, the stalk has no marks. its not bent.
the plastic has a few nicks nothing really noticeable, i can take close up photos if you like.
|
That would be great if it's not too much trouble, thanks.
Hey - do you happen to have the hand brake button? Little threaded plastic cyclinder? Mine's broken too.
|
|
|
Location: Sydney
Registered: February 2003
|
Re: CHRIS's MA61, RA60 and S13 sale, heaps of shit! now with Prices!
|
Mon, 18 July 2005 07:30
|
|
ok will do tomorrow.
dont have the button tho sorry
|
|
|
Location: Hobart, TAS
Registered: October 2004
|
Re: CHRIS's MA61, RA60 and S13 sale, heaps of shit! now with Prices!
|
Tue, 19 July 2005 10:50
|
|
Okay, i'll take you up on that offer Stefan, thnx.
Following that i'll also take the consol with lid and switches, just realised mines not 'perfect', im a picky guy Just as long as nothings broken off your console, i'll take it.
Might as well take the right hand splash guard as well since im sharing postage too.
Unstitched gear boot with wire (blue)
Indicator spacer thingys
console with lid (has been poorly retrimmed) and all switches (blue)
front right wheel splash guards
Total of $27 if my math is correct tonight. Since posting to stefans place (is that alright stefan?), i think the post code is 7000?
|
|
|
Location: Hobart, Tas
Registered: May 2002
|
Re: CHRIS's MA61, RA60 and S13 sale, heaps of shit! now with Prices!
|
Tue, 19 July 2005 12:14
|
|
Well, as long as the postage 'split' is fair
|
|
|
Location: Sydney
Registered: February 2003
|
Re: CHRIS's MA61, RA60 and S13 sale, heaps of shit! now with Prices!
|
Tue, 19 July 2005 12:36
|
|
most of that stuff should be fairly cheap to post, except the splash guard, its quite large, so would be quite expensive i imagine.
let me know if you still wanna do it, and ill work out postage costs to 7000...?
sorry stefan, totally forgot about those pics, heaps busy today, ill take them and get them up first thing tomorrow
[Updated on: Tue, 19 July 2005 12:37]
|
|
|
Location: Hobart, TAS
Registered: October 2004
|
Re: CHRIS's MA61, RA60 and S13 sale, heaps of shit! now with Prices!
|
Tue, 19 July 2005 14:09
|
|
Well yeh get some postage quotes and ill see, you might be right it'll (the splash gaurd) just be too expensive to post down.
Stefan, i'm sure we can fairly split the postage of our items... 20-80 i was thinking jk. We'll work it out once we get quotes from chris.
|
|
|
Location: Sydney
Registered: February 2003
|
|
|
Location: Hobart, TAS
Registered: October 2004
|
|
|
Location: Hobart, Tas
Registered: May 2002
|
Re: CHRIS's MA61, RA60 and S13 sale, heaps of shit! now with Prices!
|
Wed, 20 July 2005 13:47
|
|
So.. .what is the postage split? And does it really work out cheaper for us each compared with separately? (What suburb are you in, negative boost?)
|
|
|
Location: Sydney
Registered: February 2003
|
Re: CHRIS's MA61, RA60 and S13 sale, heaps of shit! now with Prices!
|
Wed, 20 July 2005 14:34
|
|
it would work out cheaper i imagine, because the seatbelt thing can fit inside the packaging for the console, space which would otherwise be unoccupied
|
|
|
Location: melb.vic.au
Registered: December 2004
|
Re: CHRIS's MA61, RA60 and S13 sale, heaps of shit! now with Prices!
|
Fri, 22 July 2005 03:31
|
|
Hey buddy,
Interested in the s13 parts:
How much for:
indicators?
broken headlights?
parts of dash?
Cheers
|
|
|
Location: Hobart, Tas
Registered: May 2002
|
Re: CHRIS's MA61, RA60 and S13 sale, heaps of shit! now with Prices!
|
Fri, 22 July 2005 04:45
|
|
I'll grab just the rear vents + seat belt part, and not get the B-pillars. PM both of us the bank details, and how you want the postage split, and we can sort this out.
|
|
|
Location: Sydney
Registered: February 2003
|
Re: CHRIS's MA61, RA60 and S13 sale, heaps of shit! now with Prices!
|
Fri, 22 July 2005 06:28
|
|
Terminal Velocity wrote on Fri, 22 July 2005 13:31 | Hey buddy,
Interested in the s13 parts:
How much for:
indicators?
broken headlights?
parts of dash?
Cheers
|
indicators may be sold, awaiting payment. $40 (pair)
headlights both lenses are now cracked $25 (pair)
cluster $10
|
|
|
Location: Sydney
Registered: February 2003
|
Re: CHRIS's MA61, RA60 and S13 sale, heaps of shit! now with Prices!
|
Mon, 25 July 2005 11:28
|
|
bump
|
|
|
Location: Perth, WA
Registered: September 2003
|
Re: CHRIS's MA61, RA60 and S13 sale, heaps of shit! now with Prices!
|
Fri, 29 July 2005 04:58
|
|
Chris.. I'll have to confirm, but pretty sure my mate needs both front speaker covers, and the driver kick panel (blue)..
I'll have a look and get back to you.
Pretty light stuff - hopefully it won't be much to send to West Perth 6005 ??
Cheers
Damo
TRD 83
|
|
|
Location: Sydney
Registered: February 2003
|
Re: CHRIS's MA61, RA60 and S13 sale, heaps of shit! now with Prices!
|
Mon, 08 August 2005 07:37
|
|
bump
|
|
|
Location: Sydney
Registered: February 2003
|
Re: CHRIS's MA61, RA60 and S13 sale, heaps of shit! now with Prices!
|
Wed, 23 November 2005 06:41
|
|
bump
|
|
|
Location: Sydney
Registered: August 2005
|
Re: CHRIS's MA61, RA60 and S13 sale, heaps of shit! now with Prices!
|
Sat, 03 December 2005 13:19
|
|
What parts are left? I'm interested in the good console (non-hacked) and the rear part of the console if its still available + wheel arch splash guards. Any of that stuff left?
Cheers
|
|
|
I Supported Toymods
Location: melbourne.vic.au
Registered: May 2002
|
Re: MA61 and RA60 parts
|
Sun, 04 December 2005 10:14
|
|
STR8 2.8 wrote on Fri, 15 July 2005 11:24 | ...front bar urethane insert $5...
|
Would you freight it to Victoria?
If so how much for 3030?
Cheers.
|
|
|