| Author | Topic | 
|---|
| 
 Registered:
 May 2003
 
 | 
	| infringement notice |  Sun, 17 July 2005 12:07   |  |  |  
	| i got 2 infringement notices on my hilux last week at the spit. there was big cop and transport department road block set up. anyways, i got done for too low ( four bolts under rear axle holding lowering blocks) and front bumpstops were cut down, but still had a clearance gap, all up $150. long story short, i bought the hilux about a month ago with safety certificate and therefore assummed it was all roadworthy, this really sucks. is there any thing i can do b4 i cough up for the fine??? |  | 
|  | 
|  
 Location:
 brisbane
 Registered:
 December 2004
 | 
	| Re: infringement notice |  Sun, 17 July 2005 12:09    |  |  |  
	| go hit the roadworthy place who did it to pay the fine, or ring the cop shop and ask what you can do but i dont think youll have much luck because whos to say you havnt changed anything not saying you have but thats how they will see it those 4 bolts a few m8s have got done for those few bolts , cut them down problem fixed |  | 
|  | 
| 
 Registered:
 May 2003
 
 | 
	| Re: infringement notice |  Sun, 17 July 2005 12:12    |  |  |  
	| yeah thats what i thought, any ideas what to do about bumpstops with out having to wind suspension back up?? |  | 
|  | 
|  
 Location:
 brisbane
 Registered:
 December 2004
 | 
	| Re: infringement notice |  Sun, 17 July 2005 12:19    |  |  |  
	| put new bump stops in wind the torsion bars up i presume thats whats in it? and clear the defect and drop it again... :P/.... or buy drop spindles lowers it another 3inchs   |  | 
|  | 
| 
 Registered:
 May 2003
 
 | 
	| Re: infringement notice |  Sun, 17 July 2005 12:23    |  |  |  
	| i dont have a defect notice just got fined so i dont have to show it too ne one, i just wanted to know how i could make the bumpstops legal without raising it up, at the moment there is about a 20mm gap between it, which wasnt enough for the cops poking stick |  | 
|  | 
|  
 Location:
 Kita-Ku, Sapporo, Japan
 Registered:
 January 2003
 | 
	| Re: infringement notice |  Sun, 17 July 2005 12:31   |  |  |  
	| only 20mm of suspension movement before you hit bumpstops? that must suck.. and be dangerous   |  | 
|  |