| Author | Topic |
|---|
Location:
Newcastle
Registered:
September 2002
|
 2TGEU head on a 3TGTE bottomend
|
Wed, 11 December 2002 12:45
|
 |
|
Will the 2TG head bolt straight onto the 3TGTE bottom end? is there any mods to be done? if so what are they?
|
|
|
Location:
Carlingford, Sydney
Registered:
May 2002
|
|
Re: 2TGEU head on a 3TGTE bottomend
|
Thu, 12 December 2002 06:15
|
|
Id also know how hard this is
is it the same as 2TG head onto a 3T?
|
|
|
Location:
Brisbane
Registered:
May 2002
|
|
|
Location:
Carlingford, Sydney
Registered:
May 2002
|
|
|
Location:
Newcastle
Registered:
September 2002
|
|
Re: 2TGEU head on a 3TGTE bottomend
|
Thu, 12 December 2002 09:10
|
|
Norbie: thanks for that bit of info! 
|
|
|
Club President
I supported Toymods
Location:
Sydney
Registered:
May 2002
|
|
Re: 2TGEU head on a 3TGTE bottomend
|
Fri, 13 December 2002 04:20
|
|
Josh/Fly PSI,
I assume you are both thinging of a Turbo Hybrid 2TG/3TGEU ?
Yes the heads fit on Valve releifs can easily be worked out by a decent Engine Builder. Also depends on the compression your going to run. Ie Domed top piston needs a bigger releif to a flat top Piston.
Other thing is then what cams and ECU you will be running. I don't know that the Stock 3TGTE computer could handle the 2TGEU cams.
Depending on your time frame you may be able to see how mine goes. (Yes thats what I have been building since August last year  )
There is also another one being built in the gong as we speak !
|
|
|
Location:
up yours!
Registered:
May 2002
|
|
Re: 2TGEU head on a 3TGTE bottomend
|
Fri, 13 December 2002 04:28
|
|
Who in Wollongong would be building a 3T?
We are all into the high tech stuff down here! 
|
|
|
Club President
I supported Toymods
Location:
Sydney
Registered:
May 2002
|
|
Re: 2TGEU head on a 3TGTE bottomend
|
Fri, 13 December 2002 05:04
|
|
Yogi,
We all know who has realised the error of there ways lol 
And since we all need a basis for these idea's here the specs for mine
http://www.toymods.org.au/rodney_try.html
Mind you Guys, There is nothing stoppping you acheiving good horsepower on a 3TGTEU head !! Both heads use the same size valves ! 
|
|
|
Club President
I supported Toymods
Location:
Sydney
Registered:
May 2002
|
|
|
Location:
Carlingford, Sydney
Registered:
May 2002
|
|
Re: 2TGEU head on a 3TGTE bottomend
|
Fri, 13 December 2002 07:22
|
|
nice
thanks for that rod
well ill be running the microtech MTX8
but ill be turboing the 2TG first then getting a 3TG to rebuild and put the 2TG head onto.
|
|
|
Location:
Newcastle
Registered:
September 2002
|
|
Re: 2TGEU head on a 3TGTE bottomend
|
Fri, 13 December 2002 11:49
|
|
Rod,
Ive got a 2tgeu head with mild cams init which im wanting to use in the hybrid 3T/2TG it will be turboed. Im dont know what computer i will be useing. Ive got a Microtech Digi1+ an MT8, but i dont think i will using either of them.
I was thinkin of running around 8-8.6:1 compression i would also be making all my own manifolding as i work in a metal Fab workshop.
Now all i need is a 3TGTE bottom end for the conversion,anyone got one for sale?
By the way this will be going in my new TA22,which already has a 2TGEU init.
That US TA is sweet
|
|
|
Re: 2TGEU head on a 3TGTE bottomend