Author | Topic |
Location: Brisbane
Registered: October 2004
|
|
|
I supported Toymods
Location: Perth, Western Australia
Registered: December 2002
|
Re: 1GGTE parts, igniter, OC relay, fuse box, throttle cable etc
|
Wed, 20 July 2005 02:44
|
|
I have a spare ignitor, throttle cable, throttle body and TPS. I probably also have an OC relay - but have no idea what you mean or want by the term "OC"? I may even be able to dig up a fuse box, if you tell me which fuse box you want?!!!
|
|
|
Location: Brisbane
Registered: October 2004
|
Re: 1GGTE parts, igniter, OC relay, fuse box, throttle cable etc
|
Wed, 20 July 2005 02:57
|
|
OC = opening circuit
don't need throttle body, or TPS, just cable back to pedal, and what ever mounts the cable to the pedal... fuse box for a GA70 if possible for engine only, don't need auxilary stuff...
|
|
|
Location: Brisbane
Registered: October 2004
|
Re: 1GGTE parts, igniter, OC relay, fuse box, throttle cable etc
|
Fri, 22 July 2005 02:10
|
|
bump...
anyluck with those relays CLG?
anyone else?
|
|
|
Location: Brisbane
Registered: May 2002
|
Re: 1GGTE parts, igniter, OC relay, fuse box, throttle cable etc
|
Fri, 22 July 2005 02:54
|
|
I've got a GA70 throttle cable...if that would suit you?
$10 if you want to come and pick it up?
I'll PM you a phone number...
Cheers
Wilbo
|
|
|
Location: Brisbane
Registered: October 2004
|
Re: 1GGTE parts, igniter, OC relay, fuse box, throttle cable etc
|
Sat, 23 July 2005 07:39
|
|
don't suppose you've got the bits to make it fit the pedal?
|
|
|
Location: townsville NQLD
Registered: February 2004
|
Re: 1GGTE parts, igniter, OC relay, fuse box, throttle cable etc
|
Sat, 23 July 2005 08:54
|
|
ive used a MX62 cresida throttle cable - works good and the pedal pivot bolts straight onto the floor with a bit of hole elongating and pedal bending.
might be an easier swap than the GA70 wilbo will probly have one too
|
|
|
Location: Brisbane
Registered: October 2004
|
Re: 1GGTE parts, igniter, OC relay, fuse box, throttle cable etc
|
Sat, 23 July 2005 09:45
|
|
any one got a MX62 Cressy throttle pedal/cable????
|
|
|
Location: Brisbane
Registered: October 2004
|
Re: 1GGTE parts, <READ ON>
|
Tue, 26 July 2005 13:43
|
|
bump
still looking for igniter, fuse box, opening circuit relay etc
and to add to the list, i need the bracket that goes on the right hand side of the sump... connecting the sump to the bellhousing...
someone's gotta have something
|
|
|
Location: adelaide
Registered: July 2005
|
Re: 1GGTE parts, igniter, OC relay, and MORE! read on
|
Wed, 27 July 2005 12:55
|
|
hay dude,
i have what your looking for pm me for more details and i can help you..
cheers
kristy
|
|
|
Location: Brisbane
Registered: May 2002
|
Re: 1GGTE parts, igniter, OC relay, fuse box, throttle cable etc
|
Wed, 27 July 2005 14:08
|
|
brett_celicacoupe wrote on Sat, 23 July 2005 18:54 | ive used a MX62 cresida throttle cable - works good and the pedal pivot bolts straight onto the floor with a bit of hole elongating and pedal bending.
might be an easier swap than the GA70 wilbo will probly have one too
|
Do you mean MX62 pedal as well as cable?
Be aware that there are two different types of pedals, one that clips/pivots on the floor and one that doesn't touch the floor.
I've got a spare one that clips to the floor but not the other
Also the GA70 / MX62 cables are very close to the same length, however the GA70 has a longer threaded section where the two nuts that hold it onto the bracket are so it fits with the rubber insulation piece.
hickoz_bro: give us a ring sometime to sort out arranging a meeting
Cheers
Wilbo
|
|
|
Location: Brisbane
Registered: October 2004
|
Re: 1GGTE parts, igniter, OC relay, fuse box, throttle cable etc
|
Wed, 27 July 2005 22:55
|
|
awweeesome!
|
|
|
I supported Toymods
Location: Australia
Registered: November 2003
|
Re: 1GGTE parts, igniter, OC relay, and MORE! read on
|
Thu, 28 July 2005 00:49
|
|
I've got a Circuit Opening Relay from a 5MGE powered car.
Should be identical to 1G stuff as its all flaptype afm triggered fuelpump.
Interested?
|
|
|
Location: Brisbane
Registered: October 2004
|
Re: 1GGTE parts, igniter, OC relay, and MORE! read on
|
Thu, 28 July 2005 01:30
|
|
absolutly, but let me see what kristy (FrEaK oF CaRs) has to offer, and i'll get back to you...
P.S. in responce to your sig... i'm taking the "do it right" option... even if it takes a few attempts
|
|
|
Location: Brisbane
Registered: October 2004
|
Re: 1GGTE parts, igniter, OC relay, and MORE! read on
|
Thu, 28 July 2005 04:37
|
|
okay, to add to the list... looking for a tube and fin intercooler... gotta fit between the lights, 550mm wide (inlet and outlet can be wider if they're down nice and low) and not more then 350mm tall...
|
|
|
Location: townsville NQLD
Registered: February 2004
|
Re: 1GGTE parts, igniter, OC relay, fuse box, throttle cable etc
|
Sat, 30 July 2005 00:28
|
|
wilbo666 wrote on Thu, 28 July 2005 00:08 |
brett_celicacoupe wrote on Sat, 23 July 2005 18:54 | ive used a MX62 cresida throttle cable - works good and the pedal pivot bolts straight onto the floor with a bit of hole elongating and pedal bending.
might be an easier swap than the GA70 wilbo will probly have one too
|
Do you mean MX62 pedal as well as cable?
Be aware that there are two different types of pedals, one that clips/pivots on the floor and one that doesn't touch the floor.
I've got a spare one that clips to the floor but not the other
Also the GA70 / MX62 cables are very close to the same length, however the GA70 has a longer threaded section where the two nuts that hold it onto the bracket are so it fits with the rubber insulation piece.
hickoz_bro: give us a ring sometime to sort out arranging a meeting
Cheers
Wilbo
|
its the pedal type with the pivot that bolts to the firewall - not attached to the floor
|
|
|
Location: Brisbane
Registered: October 2004
|
Re: 1GGTE parts, igniter, OC relay, fuse box, throttle cable etc
|
Sat, 30 July 2005 08:30
|
|
what is? wilbos pivots from the firewall?? or the RA28's? or the MX62? i'm confused :S
btw, kristy (FrEaK oF CaRs)is supplying most of the bits, igniter, OC relay, and that bracket...
if you haven't sent it off already, any chance of throwing in the distrubutor lead??
still looking for the intercooler...
ANY ONE LOOKING FOR ALUMINIUM WORK IN BRIS AREA PM ME
just had a guy do my surge tank, good work, really cheap prices... i'll be going back :D:D:D
|
|
|
Location: Brisbane
Registered: October 2004
|
Re: 1GGTE parts, igniter, OC relay, fuse box, throttle cable etc
|
Sat, 30 July 2005 12:16
|
|
and another thing... need a pod filter adaptor to suit the 1G AFM... any suggestions?
something preferably with a 3" flange
|
|
|
Location: townsville NQLD
Registered: February 2004
|
Re: 1GGTE parts, igniter, OC relay, fuse box, throttle cable etc
|
Sun, 31 July 2005 01:02
|
|
hickoz_bro wrote on Sat, 30 July 2005 18:30 | what is? wilbos pivots from the firewall?? or the RA28's? or the MX62? i'm confused :S
|
the RA40s (same as RA28 etc.??) have the throttle pedal pivot bolted to the firewall with 2 M6 bolts - ie. not touching the floor.
so do the MX62 cressidas, so you just grab a MX62 pedal, and cable and elongate the two M6 holes on the pivot piece of plastic where it bolts to the firewall. then for memory i had to cut and twist the pedal rod a little to make it sit right. then, the flange thing where the cable (outer) bolts to the firewall, i just made it smaller and put a couple self tappers through it.
hickoz_bro wrote on Sat, 30 July 2005 22:16 | and another thing... need a pod filter adaptor to suit the 1G AFM... any suggestions?
something preferably with a 3" flange
|
why not just make one out of 1mm plate with a piece of 3" exhaust pipe attached.
thats what ill be doing...easy
|
|
|
Location: townsville NQLD
Registered: February 2004
|
Re: 1GGTE parts, igniter, OC relay, fuse box, throttle cable etc
|
Sun, 31 July 2005 01:05
|
|
hickoz_bro wrote on Sat, 30 July 2005 18:30 | what is? wilbos pivots from the firewall?? or the RA28's? or the MX62? i'm confused :S
|
the RA40s (same as RA28 etc.??) have the throttle pedal pivot bolted to the firewall with 2 M6 bolts - ie. not touching the floor.
so do the MX62 cressidas, so you just grab a MX62 pedal, and cable and elongate the two M6 holes on the pivot piece of plastic where it bolts to the firewall. then for memory i had to cut and twist the pedal rod a little to make it sit right. then, the flange thing where the cable (outer) bolts to the firewall, i just made it smaller and put a couple self tappers through it.
hickoz_bro wrote on Sat, 30 July 2005 22:16 | and another thing... need a pod filter adaptor to suit the 1G AFM... any suggestions?
something preferably with a 3" flange
|
why not just make one out of 1mm plate with a piece of 3" exhaust pipe attached.
thats what ill be doing...easy
|
|
|
Location: Brisbane
Registered: October 2004
|
Re: 1GGTE parts, igniter, OC relay, fuse box, throttle cable etc
|
Sun, 31 July 2005 08:28
|
|
nah... RA28's bolt to the floor, WILBO has assured me this is the type he's got... so it's all good...
and RA28FREAK has got a pod filter adaptor thinger for me... so THAT'S all good
|
|
|
Location: Brisbane
Registered: May 2002
|
Re: 1GGTE parts, igniter, OC relay, and MORE! read on
|
Sun, 31 July 2005 08:34
|
|
Brett, what I was saying (a long way ago in this post now...) is that there are TWO DIFFERENT types of accelerator pedal available for MX62's ex factory as far as I am aware. One is free standing (i.e. only the two bolts to the firewall), the other bolts to the fire wall and also clips to the floor (where it pivots).
hickoz_bro: you still good to pickup tomorrow night?
Cheers
Wilbo
|
|
|
Location: Brisbane
Registered: October 2004
|
Re: 1GGTE parts, igniter, OC relay, and MORE! read on
|
Sun, 31 July 2005 08:37
|
|
pending transport... gotta try and put the motorbike back together, or might have another car.... about 95% certain i'll make it...
seeya then
|
|
|
Location: townsville NQLD
Registered: February 2004
|
Re: 1GGTE parts, igniter, OC relay, and MORE! read on
|
Sun, 31 July 2005 08:55
|
|
RA40 pedals are "free standing" - not attached to the floor.
better setup in my opinion
|
|
|
Location: Brisbane
Registered: October 2004
|
Re: 1GGTE parts, igniter, OC relay, and MORE! read on
|
Sun, 31 July 2005 09:00
|
|
floor mount gets my vote... IMO, better control in bare feet, good for heel and toeing
|
|
|
Location: Pine Rivers QLD
Registered: April 2005
|
Re: 1GGTE parts, igniter, OC relay, and MORE! read on
|
Sat, 06 August 2005 08:34
|
|
hey man feel fee to PM me or something if you want to visit my z20 wreck and salvage what you want from it. you will have to email or pm me though as i don't intend on coming back to this post sorry. i am north bris
|
|
|
Location: Brisbane
Registered: October 2004
|
Re: 1GGTE parts, igniter, and MORE! read on
|
Thu, 18 August 2005 08:43
|
|
once again looking for an igniter, and that brace that joins the bottom rear of the sump with the front face of the bellhousing, need one for the right hand side...
appears that Kristy (FrEaK oF CaRs) has taken my money and run... almost 3 weeks and still no parts?
|
|
|
Location: Brisbane
Registered: October 2004
|
Re: 1GGTE parts, igniter, and MORE! read on
|
Fri, 26 August 2005 00:25
|
|
got all the parts i need for the moment, apologies to kristy for jumping the gun, seems there was numerous problems with the post office, but it's all good now...
|
|
|
Location: Brisbane
Registered: October 2004
|
Re: 1GGTE parts, igniter, and MORE! read on
|
Fri, 26 August 2005 00:37
|
|
now all i need is a radiator to suit RA28... condition doesn't matter, just need the mouting brackets... they gotta be in good cond. need it YESTREDAY! anyone able to help???
|
|
|
Location: Brisbane
Registered: October 2004
|
Re: 1GGTE parts, igniter, and MORE! read on
|
Fri, 26 August 2005 04:50
|
|
got 'em...
gotta love the wreckers, $40 for a decent RA radiator, $20 for a damaged one... so what am i to do?? get a (half) decent one, and stick a screw driver threw it (a few times) and walla... a radiator for $20... good thing i only need the mounting brackets, not recommended for those needing a good radiator...
|
|
|
Location: Brisbane
Registered: October 2004
|
Re: 1GGTE parts, igniter, and MORE! read on
|
Fri, 26 August 2005 08:03
|
|
well now i need that blasted bracket still... bolts onto the LEFT side of the block and mounts to the face of the bell housing there's one on either side, but i need the LEFT one...
gotta be a spare one out there somewhere...
|
|
|