| Author | Topic |
|---|
Location:
sydney
Registered:
October 2004
|
|
20v head gasket
|
Thu, 21 July 2005 16:10
|
 |
was just wondering if anyone knows how much valve clearance there is, running a 20v head (silver top) with gze pistons?
as i am thinking of using a trd 0.8mm metal head gasket, but if the clearances are too close for comfort i wont bother
thanks in advance,
andrew
|
|
|
Location:
Redbank Plains,near Ipswi...
Registered:
May 2002
|
|
Re: 20v head gasket
|
Fri, 22 July 2005 00:52
|
|
|
the ZE pistons are lower and will clear until a cam belt breaks
|
|
|
Location:
sydney
Registered:
October 2004
|
|
Re: 20v head gasket
|
Fri, 22 July 2005 06:09
|
|
|
so they are heaps lower so that with the thinner head gasket there is still no worrys? as i will have to get the head machined also. i know there is no worrys with the standard thickness head gasket, was just wondering exactly how much clearance there is
|
|
|
Location:
Canberra
Registered:
November 2004
|
|
Re: 20v head gasket
|
Fri, 22 July 2005 11:37
|
|
Hey dude
Do you know how much the trd steel gasket is for the 20v, might need one myself.
thanks
|
|
|
