| Author | Topic |
|---|
Location:
Dandenong Ranges, VIC
Registered:
July 2004
|
|
|
Location:
Melbourne - NthSubs
Registered:
January 2004
|
|
Re: Celica T50's - $50 each
|
Mon, 25 July 2005 04:48
 
|
 |
|
what tail shaft do the celica's use? would a ke70 or ae86 tailshaft fit?
|
|
|
Location:
Melbourne, Australia
Registered:
March 2005
|
|
Re: Celica T50's - $50 each
|
Mon, 25 July 2005 05:05
|
|
KE70 manual tailshaft will fit. Auto will not.
AE71 tailshafts will not fit.
AE86 tailshafts will not fit.
This is because the K40/K50 output spline is the same as the early T50 output spline, but T50s from 4A motors have a different output spline to the early T50 &K40/K50.
|
|
|
Location:
Melbourne
Registered:
June 2004
|
|
Re: Celica T50's - $50 each
|
Mon, 25 July 2005 23:26
|
|
hey jim,
where abouts do you live? i'm very interested in the t50 that was in your car.
did you ever have any downshifting problems?
ie: not being able to get 3rd gear without messing about????
col
|
|
|
Location:
Melbourne - NthSubs
Registered:
January 2004
|
|
Re: Celica T50's - $50 each
|
Tue, 26 July 2005 02:25
|
|
dont the ke70 and ae71 share the same tailshafts???? oh well
bump
|
|
|
Location:
Melbourne, Australia
Registered:
March 2005
|
|
Re: Celica T50's - $50 each
|
Tue, 26 July 2005 09:14
|
|
|
Probably the same tailshaft, but the yoke is different because 4A T50s have 22 spline output shafts.
|
|
|
Location:
Melbourne, S.E. suburbs.
Registered:
July 2005
|
|
Re: Celica T50's - $50 each
|
Tue, 26 July 2005 12:18
|
|
|
So would the celica t50 have the same input shaft as the 4A one. And would it bolt upto a 4-ac bellhousing and clutch because if so i'm interested.
|
|
|
Location:
Dandenong Ranges, VIC
Registered:
July 2004
|
|
SOLD
|
Wed, 27 July 2005 03:38
|
|
|
All sold guys, sorry.
|
|
|
