Toymods Car Club Inc: Engines, Accessories and other Mechanicals => 3SG(T)E RWD Conversion Parts

Toymods Car Club
www.toymods.org.au

Classifieds » Engines, Accessories and other Mechanicals » 3SG(T)E RWD Conversion Parts Show: Today's Posts :: Show Polls Email to friend

Author

Topic

Location:
Melbourne
Registered:
September 2002

3SG(T)E RWD Conversion Parts	Sun, 31 July 2005 09:07

There seemed to be more interest in the bits individually for this setup, so I've broken up the package. W57 Gearbox. Good condition. Includes shifter in rear-most position SA63 bellhousing. Has been machined to allow the spigot locate in the crankshaft. Inlcudes clutch fork, near new throw-out bearing and cylinder. W57 Gearbox with machined bellhousing with throwout $500 SA63 unmachined bellhousing with throwout $120 Custom made billet steel flywheel and ring gear to suit Gen 2 or later. Available again $450 Heavy duty Daikin (Exedy) button racing clutch. Practically new. Has only done about 3 laps of Sandown. SOLD 2S Starter motor - 2 available, one is freshly reconditioned $80 reco and $30 used but works well New spigot bearings $15 each Custom race sump and pickup. Has baffles, trap doors and wings. Holds 5 litres. $300 I'll have some pics next week. Located in Melbourne. [Updated on: Mon, 15 August 2005 00:00] [Report message to a moderator]

gabe
Forums Junkie

Location:
Perth
Registered:
June 2002

Re: 3SG(T)E RWD W57 Gearbox Kit	Sun, 31 July 2005 09:31

A little more info on the clutch? Material? Sprung/Unsprung center? Picture? Cheers [Report message to a moderator]

Location:
Melbourne
Registered:
September 2002

Re: 3SG(T)E RWD W57 Gearbox Kit	Sun, 31 July 2005 10:36

The clutch driven plate has 5 brass buttons and a sprung centre on it. The pressure plate just looks like their regular one, but is the competition version with extra clamping force. I don't have figures on it though. I can alternatively supply a 5 button solid centre driven plate which is brand new... or a regular fibrous type sprung driven plate which has 5 or 6 race meetings on it. Also have another heavy duty pressure plate which has done about 5 or 6 race meetings but is barely worn and has plenty of life left in it. I think all of these clutches will fit any RWD Toyota with a W5x or similar gearbox. I will get some photos up in the next few days. I need to visit my engine builder to retrieve the flywheel first. [Report message to a moderator]

Location:
Melbourne
Registered:
September 2002

Re: 3SG(T)E RWD W57 Gearbox Package	Wed, 03 August 2005 13:20

For those of you wanting some pics of the various clutches I have available, here are some pics. I probably wont be able to get pics of the billet flywheel to suit the W57 up until after the weekend. Click on the thumbnails for larger images Near New Daikin competition pressure plate - SOLD and matching sprung button centre driven plate - SOLD More to follow... [Updated on: Sun, 14 August 2005 23:37] [Report message to a moderator]

Location:
Melbourne
Registered:
September 2002

Re: 3SG(T)E RWD W57 Gearbox Package	Wed, 03 August 2005 13:21

Slighly more used Daikin competition pressure plate - SOLD Button style unsprung centre driven plate - option 1 - SOLD Button style unsprung centre driven plate - option 2 - SOLD Used AP 5.5 inch Low MOI Racing Clutch 3S (Gen II or later) Group A / Super Tourer low MOI flywheel Driven plates brand new and splined to suit W55 etc - $1000 [Updated on: Sun, 14 August 2005 23:42] [Report message to a moderator]

Location:
Melbourne
Registered:
September 2002

Re: 3SG(T)E RWD Conversion Parts	Thu, 11 August 2005 01:53

Bump [Report message to a moderator]

Blackers
Regular

Location:
Forrestdale W.A.
Registered:
October 2004

Re: 3SG(T)E RWD W57 Gearbox Package	Fri, 12 August 2005 11:59

Any chance you can put prices on the pics of the clutches posted? Cheers Mark [Report message to a moderator]

Location:
Melbourne
Registered:
September 2002

Re: 3SG(T)E RWD W57 Gearbox Package	Sun, 14 August 2005 23:47

Pics are updated now with sold notice or prices. Gearbox and bellhousings are still available. [Report message to a moderator]

rx-3 ip
Regular

Location:
brisbane
Registered:
October 2004

Re: 3SG(T)E RWD W57 Gearbox Package	Thu, 18 August 2005 08:22

Please contact me on 07-34047195 re AP 5.5 to make sure it fits my 3sge N/A & w57 Thanks Michael [Report message to a moderator]

gabe
Forums Junkie

Location:
Perth
Registered:
June 2002

Re: 3SG(T)E RWD Conversion Parts	Thu, 18 August 2005 23:10

No Message Body [Updated on: Thu, 18 August 2005 23:10] [Report message to a moderator]

Previous Topic:	SOLD JDM T50 (AE86) WITH QUICK SHIFTER $250
Next Topic:	##FS: Mikuni-Solex 40PHH / 44PHH rebuild kits

Current Time: Thu Jan 23 22:24:53 UTC 2025

Total time taken to generate the page: 0.0073451995849609 seconds

.:: Contact :: Home ::.