| Author | Topic |
|---|
Location:
Sydney
Registered:
May 2002
|
 MA70 7MGE to 7MGTE... Wiring Problems, Help Needed!
|
Tue, 04 June 2002 12:11
|
 |
Guys, i have just bolted a 7MGTE out of a MZ20 soarer into my MA70 (previously naturally aspirated). The wiring looms have different connectors, (1 under dash near ecu, & 1 near main fuse box), thus making it impossible to plug it together & start it up. Making things worse the conectors on the new 7MGTE wiring loom have different amounts of wires going to them in comparison to the connectors left hanging from the 7MGE, & they use different coloured wires.
Has anybody done this swap before and what did you do to overcome it?
Has anybody got wiring diagrams for the:
* MA70 7MGE
* MA70 7MGTE
* MZ20 7MGTE Soarer?
Can anybody recommend an auto electrician who knows what they are doing and will look after me in wiring it up, prefer in the Hurstville area?
If anybody can shed some light on the topic as it is driving me insane... it would be muchly appreciated. Cheers.
|
|
|
I supported Toymods
Location:
I renounced punctuation
Registered:
May 2002
|
|
Re: MA70 7MGE to 7MGTE... Wiring Problems, Help Needed!
|
Wed, 05 June 2002 00:07
|
|
|
Since both motors were locally released in the MA70, you should be able to get the wiring diagrams from your local Toyota service centre (provided you beg nicely!)
|
|
|
