Author | Topic |

Location: adel
Registered: September 2002
|
..::blow off valve::.. into a 4afc?
|
Thu, 26 December 2002 05:57
|
 |
mmmm.........just wonderin..............is putting a blow of valve into a 4afc possible........or............only turbo posible?...................
cheers jimmy
|
|
|

I supported Toymods Banned User
Location: Brisbane
Registered: May 2002
|
Re: ..::blow off valve::.. into a 4afc?
|
Thu, 26 December 2002 06:22

|
 |
There is nothing stopping you putting a BOV on there somewhere but it wont make any noises no matter how hard you try!
|
|
|

Location: adel
Registered: September 2002
|
Re: ..::blow off valve::.. into a 4afc?
|
Thu, 26 December 2002 06:29

|
 |
how come?...............so there is no way?
|
|
|

I supported Toymods Banned User
Location: Brisbane
Registered: May 2002
|
Re: ..::blow off valve::.. into a 4afc?
|
Thu, 26 December 2002 06:33

|
 |
Well i'm no expert on 4afc's but I would say that if it dont have a turbo there is no point at all in having a BOV!
The only reason for a BOV is to keep a turbo spinning when the throttle goes closed!
|
|
|

Location: adel
Registered: September 2002
|
Re: ..::blow off valve::.. into a 4afc?
|
Thu, 26 December 2002 07:27

|
 |
dam...........haha coz all i wanted was whooose....sound..........gezz...sounds killer when u hit the road with it...........
i dun care what it does.......just the sound..........SOUND~!~
cheerrs
jimmy~
|
|
|

I supported Toymods Banned User
Location: Brisbane
Registered: May 2002
|
Re: ..::blow off valve::.. into a 4afc?
|
Thu, 26 December 2002 07:38

|
 |
You could always get a mini compressor and attach it to a BOV and then when you want to make the noise you just press a button on your dash!
Or you could fit a micro switch on the throttle and wire up a momentry circuit to the compressor so that when you take your foot off the throttle it makes the noise for a short time!
OR you could always do a turbo conversion
|
|
|

I supported Toymods
Location: I renounced punctuation
Registered: May 2002
|
|
|

I supported Toymods Banned User
Location: Brisbane
Registered: May 2002
|
Re: ..::blow off valve::.. into a 4afc?
|
Thu, 26 December 2002 08:09

|
 |
Thats funny
|
|
|

Location: adel
Registered: September 2002
|
Re: ..::blow off valve::.. into a 4afc?
|
Thu, 26 December 2002 09:11

|
 |
oh dammmit............then all lets..........cool it~
cheers
jimmy~
|
|
|

Location: Sydney, OZ
Registered: May 2002
|
Re: ..::blow off valve::.. into a 4afc?
|
Thu, 26 December 2002 12:51

|
 |
I there anything that hasn't been tought of yet? That's a cack!!
|
|
|

Location: Sydney Australia
Registered: May 2002
|
Re: ..::blow off valve::.. into a 4afc?
|
Thu, 26 December 2002 12:58

|
 |
fitting a bov to a NA car is about as bad as eating a cat. Its such a wank man. No offence but why would u wanna consider it.
If u like the psssshhh sound... save your $$ and get a turbo motor. Or , perfect a bov sounding gear crunch lol.
|
|
|

Location: Montrose, VIC
Registered: May 2002
|
Re: ..::blow off valve::.. into a 4afc?
|
Thu, 26 December 2002 13:18

|
 |
Save your pocket money for coloured lights sunshine
|
|
|

Location: Cabramatta, NSW
Registered: May 2002
|
Re: ..::blow off valve::.. into a 4afc?
|
Thu, 26 December 2002 14:07

|
 |
I smell rice...
|
|
|

Location: Colac, Victoria
Registered: May 2002
|
Re: ..::blow off valve::.. into a 4afc?
|
Fri, 27 December 2002 06:13

|
 |
you could always put the sound of a PShhh on your CD player and playit thru massive sic Subbies and amps! the whole neighbourhood would hear how fully sic your car is !
PHEAR THE PSSSSHH!
|
|
|

Location: Launceston, Tasmania
Registered: May 2002
|
Re: ..::blow off valve::.. into a 4afc?
|
Fri, 27 December 2002 06:38

|
 |
with the price of that one in the link it would almost be cheeper to do a turbo conversion and buy a real bov
|
|
|

Location: Montrose, VIC
Registered: May 2002
|
|
|

Location: Southern Sydney
Registered: August 2002
|
Re: ..::blow off valve::.. into a 4afc?
|
Fri, 27 December 2002 14:28

|
 |
I don't get it either.
Originally all these trends came from actual performance equipment but now they've all gone to far. ie lowering your car to increase handling is now lowering your car so it scrubs and handles like crap.
And whats the deal with reclining your seat so far you can't see where your going??? that must make you heaps faster.
|
|
|

I supported Toymods
Location: Central Coast
Registered: May 2002
|
Re: ..::blow off valve::.. into a 4afc?
|
Sat, 28 December 2002 00:01

|
 |
BBBBBBAAHAHAHAHAHAHAHAHAHAA
|
|
|

I supported Toymods
Location: I renounced punctuation
Registered: May 2002
|
|
|

Location: Southern Sydney
Registered: August 2002
|
Re: ..::blow off valve::.. into a 4afc?
|
Sat, 28 December 2002 01:20

|
 |
I know..... I bagged him on that one too!!!
hahaha
Some people don't deserve toyotas!
|
|
|

Location: adel
Registered: September 2002
|
Re: ..::blow off valve::.. into a 4afc?
|
Sat, 28 December 2002 01:36

|
 |
Quote: | Funny you should say that....this guy wanted advice on how much to cut his springs earlier
|
well first of all I was only trying to get advice, either getting a genuine one or a cut one. NOT HOW MUCH TO CUT MY SPRINGS
2ndly just wanted to know if putting a BOV into a fc is possible or not....................thats all (besides the sound.....hahah)
ne other comments..keep to your self
|
|
|

I supported Toymods
Location: Epping, Sydney
Registered: May 2002
|
Re: ..::blow off valve::.. into a 4afc?
|
Sat, 28 December 2002 05:23

|
 |
well, I'm not a fan of vento-to-atmosphere blow-off valves on turbo cars, let alone on n/a cars. all that's done for is to get a gay sound, and make your car run worse.
much better to get a plumb back, pod filter, and you still get a nice, more subtle noise, plus better performance than a standard bov.
there are a lot of options for putting a bov onto an n/a car, for all the ricers out there. the most popular is an electronic one, which takes the signal from the TPS to determine when it should make the blow-off noise. I'd assume if you had a variable TPS then it could probably be made to make loud and quiet blow offs as well, depending on how hard you backed off the throttle (just like a real bov). I never looked into it, because those sort of mods to me are a huge waste of money, and would be better spent on improving performance.
but that's personal preference, and while I dont respect what ricers do, if it's what makes them think their car is improved so be it..
ps: I have no idea what sort of TPS the 4a-fc has
|
|
|

I supported Toymods
Location: I renounced punctuation
Registered: May 2002
|
Re: ..::blow off valve::.. into a 4afc?
|
Sat, 28 December 2002 05:52

|
 |
draven wrote on Sat, 28 December 2002 16:23 |
ps: I have no idea what sort of TPS the 4a-fc has
|
None. It has a carb.
|
|
|

Location: Montrose, VIC
Registered: May 2002
|
Re: ..::blow off valve::.. into a 4afc?
|
Sat, 28 December 2002 06:31
|
 |
Interesting thing that really, I remember from looking under the bonnet of my sisters 4afc powered(!) car, that there is an air injection/bypass/whateverthehell valve there that makes a slight noise when you back of the throttle - haven't studied it in a long time, but hey, there opens up a world of 'opportunity'
Speaking also of cut springs and having the seat in the fully sic position - best that nobody gets me worked up over cut springs, but I DO know of somebody who claims having the seat right back gives them more control; 'it lets you really feel what the car is doing, mate.' This is a person with a carby turbo mazda 626, who pulled out his dash and painted the whole thing (including the gearshift boot!) with a white spraycan.
Another tip - why go to all the trouble of cutting springs, when you can just take the bloody things out? I've seen it done more than once too!
|
|
|