| Author | Topic |
|---|
Location:
Pine Rivers QLD
Registered:
April 2005
|
|
ECU reset.
|
Sat, 17 September 2005 00:21
|
 |
DETAILS OF THE CAR: I have a GZ10 soarer which i have put in a 1G-GTE twin turbo gen 2 i believe...
I had a few errors on my ECU, probably from when i was building and wiring it. Anyway i have finally fixed all the issues and went to a skid pan day where the car was not treated all that nice. Since then it has been driving very weird like there was an extra load on it or something and i thought maybe i broke something.
Anyway i finally reset my ECU to see if there was any new codes or if old ones are still occurring. When i started the car it wouldn't idle all to nice. it would go down to about 4-500rpm then rev up to stop it stalling then slowly go back down until it finally stalled. it usually would rev to 2G when i started it before... So is this just it setting its parameters again or something. anyway after it warmed up it seems to be idling much better then it used to and i took it for a drive and it seems to be running much better. everything seems to have more power and the likes. is this usual after an ECU reset?
|
|
|
