| Author | Topic |
|---|
Location:
Adelaide
Registered:
June 2005
|
|
1G-GTE power with a programable computer?
|
Tue, 27 September 2005 12:43
|
 |
Have just got my 1G-GTE for my Corona and the guy putting it in called me later today asking if I want to buy his mates EMS Stinger, its off a 1G already loom is set to go, I have a T4 with a T3 exhaust, with the stock injectors but using Coil packs that come with the whole kit, what power out put should I be lookng at?
So a 1G-GTE, gen 2 Injectors, T4/3, Custom Manifold, and EMS Stinger computer, what should I be expecting?
Also with an injector upgrade what would I be looking at there?
Any one care to have a stab, Im getting excited to see what I end up with, was only going to be putting a stock 1G in and now all this extra stuff. 
|
|
|
Location:
Adelaide, South Australia
Registered:
February 2005
|
|
Re: 1G-GTE power with a programable computer?
|
Tue, 27 September 2005 12:54
|
|
|
At least 200kw's to the rear wheels! Good choice of EMS Computer!! How much did you get that all for?
|
|
|
Location:
MACKAY
Registered:
May 2002
|
|
Re: 1G-GTE power with a programable computer?
|
Tue, 27 September 2005 12:57
|
|
I fitted a Haltech on a mates 1GGTE and tuned it on a bit over 20lbs and put out 208 RWKW .
Trevor
|
|
|
Location:
Adelaide
Registered:
June 2005
|
|
Re: 1G-GTE power with a programable computer?
|
Tue, 27 September 2005 13:06
|
|
 
That will be nuts, 200rwk = damn fast Corona, Well it was not by choice, he just got the call after I droped the engine off and he thought well he has to put mine in soon and wire it up, I had told him I want a computer, why bother doing it twice? the price is cheap, dont want to say, but it is a gooood price.
This is actualy going to be a very cheap quick car when it is done.
|
|
|
Location:
Kita-Ku, Sapporo, Japan
Registered:
January 2003
|
|
|
I supported Toymods
Location:
Perth
Registered:
May 2002
|
|
Re: 1G-GTE power with a programable computer?
|
Tue, 27 September 2005 22:44
|
|
| TA22-3SGTE wrote on Tue, 27 September 2005 20:57 |
I fitted a Haltech on a mates 1GGTE and tuned it on a bit over 20lbs and put out 208 RWKW .
|
Damn willis. What turbo Trevor?
|
|
|
Location:
sunny coast, qld
Registered:
October 2002
|
|
Re: 1G-GTE power with a programable computer?
|
Tue, 27 September 2005 23:58
|
|
What are the specs on the turbo?
Turbine A/R:
Compressor A/R:
Compressor inducer:
|
|
|
I supported Toymods
Location:
Australia
Registered:
November 2003
|
|
Re: 1G-GTE power with a programable computer?
|
Wed, 28 September 2005 00:41
|
|
Airbrushguy, get some 7MGTE injectors.
The stock injectors will start fading around 170ish rwkw at a rough guess.
|
|
|
Location:
Adelaide
Registered:
June 2005
|
|
Re: 1G-GTE power with a programable computer?
|
Wed, 28 September 2005 08:36
|
|
The injectors will come in good time, have to fork out to get this all in the car yet. As for the turbo, the specs I have not got a clue on, I had it on a 1G a few years ago with stock computer and it had 135rwk @ 15psi.
I will just get it tuned to run as much boost as it can with the stock injectors for now and then get bigger ones later.
I will be happy with 170rwk to start with, this should keep up with most street cars anyway.
|
|
|
Location:
MACKAY
Registered:
May 2002
|
|
Re: 1G-GTE power with a programable computer?
|
Wed, 28 September 2005 12:46
|
|
justcallmefrank , It's been a few years now but I think it was a GT35/40 , The motor was in a hilux and run a flat 13sec quarter.
Trevor
|
|
|
