| Author | Topic |
|---|
Location:
Melbourne
Registered:
September 2005
|
|
Lightened flywheel and 3 puck clutch for 4A-G
|
Wed, 28 September 2005 16:05
|
 |
4.9 Kg, 212 mm flywheel, custom made. Suits all 4A-G application, ideally for track use.
3 Puck Ceramic / Copper clutch, over 2500 IBs pressure (i'm not too sure about this). Custom assembly, fully balanced, imported item.
Both items new, never been used. Flywheel was designed for 4A-GE blacktop but should fit any 4A-G application
Hoping not to seperate but will at the right price. Clutch matches flywheel, which is why not so willing to seperate.
Asking for $450 or nearest offer. Will deliver around victoria. Wouldn't mind the distance if the price is good.
|
|
|
Location:
Melbourne
Registered:
September 2005
|
|
Re: Lightened flywheel and 3 puck clutch for 4A-G
|
Mon, 10 October 2005 22:44
|
|
bump
still for sale and getting desperate now.
|
|
|
I supported Toymods
Location:
melbourne
Registered:
June 2002
|
|
|
Location:
Adelaide
Registered:
October 2002
|
|
Re: Lightened flywheel and 3 puck clutch for 4A-G
|
Tue, 11 October 2005 05:46
|
|
|
PM'D
|
|
|
Location:
Melbourne
Registered:
September 2005
|
|
Re: Lightened flywheel and 3 puck clutch for 4A-G
|
Tue, 11 October 2005 05:57
|
|
clutch and flywheel specs are above. Rather not seperate unless for the right price because the clutch has been matched to that flywheel and balanced out.
|
|
|
Location:
Wollongong, NSW
Registered:
April 2004
|
|
Re: Lightened flywheel and 3 puck clutch for 4A-G
|
Tue, 11 October 2005 06:25
|
|
Interested, what brand is the flywheel? or is it a modified stock unit? If neither who made it? The clutch - what brand?
Do you have any pics of the setup?
|
|
|
Location:
Melbourne
Registered:
September 2005
|
|
Re: Lightened flywheel and 3 puck clutch for 4A-G
|
Tue, 11 October 2005 07:41
|
|
The flywheel is a modified item from blacktop 20V (professionally done heat treated, balanced etc.. )
and the clutch is a custom assembly from an overseas clutch company that makes race clutches. KL Racing clutch company.
both items balanced and supposedly meant to be used together.
|
|
|
I supported Toymods
Location:
melbourne
Registered:
June 2002
|
|
Re: Lightened flywheel and 3 puck clutch for 4A-G
|
Tue, 11 October 2005 08:39
|
|
you can't balance a clutch an flywheel together, as the clutch rotates with the gearbox input shaft, not the flywheel (that is, it gets clamped to the flywheel in random locations)
the pressure plate and clutch will go together, jsut not because of balance.
anyway, PM me a ridiculous offer, save me doing it 
|
|
|
I supported Toymods
Location:
Ademelaide, SA
Registered:
July 2003
|
|
Re: Lightened flywheel and 3 puck clutch for 4A-G
|
Tue, 11 October 2005 09:39
|
|
actually, you can balance a flywheel and clutch together.
it's not the friction plate that gets balanced, it's the pressure plate.
small amounts of weight would have been taken out of one side of it. realistically it should go with a crank, pulley, a set of rods and a set of pistons..
|
|
|
I supported Toymods
Location:
melbourne
Registered:
June 2002
|
|
Re: Lightened flywheel and 3 puck clutch for 4A-G
|
Tue, 11 October 2005 09:42
|
|
|
well if you want to split hairs
|
|
|
Location:
Melbourne
Registered:
September 2005
|
|
Re: Lightened flywheel and 3 puck clutch for 4A-G
|
Tue, 11 October 2005 13:20
|
|
| shinybluesteel wrote on Tue, 11 October 2005 18:39 |
you can't balance a clutch an flywheel together, as the clutch rotates with the gearbox input shaft, not the flywheel (that is, it gets clamped to the flywheel in random locations)
the pressure plate and clutch will go together, jsut not because of balance.
anyway, PM me a ridiculous offer, save me doing it
|
are you being sarcastic ??
sorry i couldn't tell. i get one hostile remark out of every 15 for support from this forums. PM'd..
|
|
|
Location:
Melbourne
Registered:
September 2005
|
|
Re: Lightened flywheel and 3 puck clutch for 4A-G
|
Tue, 11 October 2005 13:30
|
|
| Steve-AE86 wrote on Tue, 11 October 2005 19:39 |
actually, you can balance a flywheel and clutch together.
it's not the friction plate that gets balanced, it's the pressure plate.
small amounts of weight would have been taken out of one side of it. realistically it should go with a crank, pulley, a set of rods and a set of pistons..
|
good call... i didn't know how it works that way
|
|
|
I supported Toymods
Location:
melbourne
Registered:
June 2002
|
|
Re: Lightened flywheel and 3 puck clutch for 4A-G
|
Tue, 11 October 2005 14:04
|
|
sarcasm? not me mate!
PM recieved, i'll get back to you.
|
|
|
Location:
Melbourne
Registered:
September 2005
|
|
Re: Lightened flywheel and 3 puck clutch for 4A-G SOLD!!!
|
Wed, 12 October 2005 08:22
|
|
SOLD!
thanks for the interest cheers everyone
|
|
|
