| Author | Topic |
|---|
Banned by his request
Location:
moved to tamworth
Registered:
July 2002
|
|
dyno sheets!
|
Sun, 09 October 2005 07:40
|
 |
just thought id start a dyno sheet thread{there is prob one already,if so this one will die of natural causes}.
just dyno sheets, with engine,mods and were dynoed.
i think it would be better with no chatting in between at all so its easy to just see sheets and work out things.
thanks
mick
|
|
|
Location:
Melbourne
Registered:
November 2003
|
|
Re: dyno sheets!
|
Sun, 09 October 2005 07:43
|
|
All results from the Beninca Dyno Day I held.
Click here
|
|
|
Banned by his request
Location:
moved to tamworth
Registered:
July 2002
|
|
Re: dyno sheets!
|
Sun, 09 October 2005 07:49
|
|
thanks Shraka,but i mean more personal ones than comp ones.if the dyno sheet says shootout mode dont post it,only because it has an extra 25% or so on it for wow factor so dosnt reflect the engine and mods as well.just thought everyone would be intrested to see what mods do and what diffrent dynos spit out!come on dont worry its all for everyones learning benefit etc.
thanks
mick
|
|
|
I supported Toymods
Location:
Epping, Sydney
Registered:
May 2002
|
|
|
Location:
Ballarat, Victoria
Registered:
March 2003
|
|
Re: dyno sheets!
|
Sun, 09 October 2005 07:57
|
|
7m-gte, 3" dump, exhaust and hi flow cat. stock boost (5psi), stock FMIC, pod filter (  )
pretty dissapointing, best run of the day was 126rwkw (they printed my worst  )
previous owner got 139rwkw, but don't have a sheet.
|
|
|
Banned by his request
Location:
moved to tamworth
Registered:
July 2002
|
|
Re: dyno sheets!
|
Sun, 09 October 2005 08:01
|
|
exellent guys thanks and add boost and turbo if diffrent from standard!
well done
mick
|
|
|
Location:
Toronto, Downtown
Registered:
September 2004
|
|
|
Location:
perth
Registered:
June 2005
|
|
Re: dyno sheets!
|
Sun, 09 October 2005 12:04
|
|
![[IMG]http://www.imageshackuk.com/files/1008/dyno-1.JPG[/IMG]]([IMG]http://www.imageshackuk.com/files/1008/dyno-1.JPG[/IMG])
7mgte few mods, stock engine befor and hiflow turbo
|
|
|
Location:
sydney
Registered:
March 2004
|
|
|
Location:
Sydney
Registered:
November 2003
|
|
Re: dyno sheets!
|
Sun, 09 October 2005 13:37
|
|
4k with 2 inch exhaust and cannon
can someone explain my fuel ratio to me i dont get it?
|
|
|
Location:
QLD, Gold Coast
Registered:
February 2004
|
|
Re: dyno sheets!
|
Sun, 09 October 2005 13:45
|
|
hi-comp pistons
full 2.25" exhaust
pod filter
apexi safc II and ITC
|
|
|
Location:
Kita-Ku, Sapporo, Japan
Registered:
January 2003
|
|
|
Location:
Melbourne
Registered:
November 2003
|
|
|
I supported Toymods
Location:
Perth
Registered:
May 2002
|
|
Re: dyno sheets!
|
Mon, 10 October 2005 00:45
|
|
| kingmick wrote on Sun, 09 October 2005 15:49 |
if the dyno sheet says shootout mode dont post it,only because it has an extra 25% or so on it for wow factor so dosnt reflect the engine and mods as well.
|
Don't talk shit mick. I know you've a lot of experience with dynos, but there is nothing wrong with a properly done Shootout graph and when done right they at least give some sort of consistency between different dynos.
Oh, and here is a 1GGTE with a sick distributor.
Nice job on that page Shraka. Damn those dyno figures were low, I'd cry if my JZZ30 made 111rwkw.
|
|
|
I supported Toymods
Location:
Australia
Registered:
November 2003
|
|
Re: dyno sheets!
|
Mon, 10 October 2005 01:02
|
|
|
|
|
Location:
perth
Registered:
June 2005
|
|
Re: dyno sheets!
|
Mon, 10 October 2005 02:22
|
|
this time
|
|
|
Location:
Canberra/Sydney
Registered:
February 2005
|
|
Re: dyno sheets!
|
Mon, 10 October 2005 04:42
|
|
Here's my 2T-G with performance extractors.
|
|
|
Location:
Perth
Registered:
October 2003
|
|
Re: dyno sheets!
|
Mon, 10 October 2005 04:56
|
|
My 1J
Heavy 4WD drivetrain losses!!
|
|
|
Location:
Adelaide - Race Central
Registered:
June 2004
|
|
Re: dyno sheets!
|
Mon, 10 October 2005 05:49
|
|
okay, well....not properly tuned...it actually recorded 97fwkw.
3SGE - rebuilt, light port 'n polish
Aftermarket ecu
Pod filter
Adjusatble cam gears
full length echaust - 2.5inch piping
button clutch
|
|
|
Location:
Campbelltown NSW
Registered:
October 2003
|
|
Re: dyno sheets!
|
Mon, 10 October 2005 06:31
|
|
2ZZGE
CAI
2.5 inch cat back exhaust
lightweight flywheel
unichip
|
|
|
Location:
Kilsyth, Melbourne
Registered:
September 2004
|
|
Re: dyno sheets!
|
Mon, 10 October 2005 08:12
|
|
| stealth007008 wrote on Mon, 10 October 2005 12:22 |
this time
|
engine/car specs please
|
|
|
Location:
Perth
Registered:
October 2003
|
|
Re: dyno sheets!
|
Mon, 10 October 2005 08:51
|
|
It's a 7M p00 motor.
It blew the head gasket shortly afterwards.
|
|
|
Location:
perth
Registered:
June 2005
|
|
Re: dyno sheets!
|
Mon, 10 October 2005 11:24
|
|
damn right - its a good old shitty 7m, hey skip it had a blown head gasket at the time of dyno - wanka..
pod, fmic, exhaust, 550cc, lexus afm, gfb bleed valve safc thats all
|
|
|
Location:
perth
Registered:
June 2005
|
|
Re: dyno sheets!
|
Mon, 10 October 2005 11:26
|
|
its a before and after hiflow ct26, it made 270.2 hp at the wheels with a dead stock ct26 on 10 psi
|
|
|
I supported Toymods
Location:
Perth
Registered:
May 2002
|
|
Re: dyno sheets!
|
Mon, 10 October 2005 22:37
|
|
| stealth007008 wrote on Mon, 10 October 2005 19:24 |
damn right - its a good old shitty 7m, hey skip it had a blown head gasket at the time of dyno - wanka..
|
Seriously dude chill, he's just poking fun at the 7M, hell, even most 7M owners I know do.
My question is what the f**k were you doing dynoing it with a BHG?
|
|
|
Location:
sunny coast, qld
Registered:
October 2002
|
|
Re: dyno sheets!
|
Mon, 10 October 2005 22:56
|
|
| stealth007008 wrote on Mon, 10 October 2005 21:24 |
damn right - its a good old shitty 7m, hey skip it had a blown head gasket at the time of dyno - wanka..
pod, fmic, exhaust, 550cc, lexus afm, gfb bleed valve safc thats all
|
and what is your trap speed?
|
|
|
Location:
perth
Registered:
June 2005
|
|
|
Location:
perth
Registered:
June 2005
|
|
Re: dyno sheets!
|
Tue, 11 October 2005 00:54
|
|
|
or are u talking about speed at max power -if so wouldnt have a clue - what do u boys think of lumpy when it comes to toyotas???
|
|
|
Location:
Newcastle, Australia
Registered:
March 2005
|
|
Re: dyno sheets!
|
Tue, 11 October 2005 00:57
|
|
No idea what that is in HP...
Can't wait to get the big intercooler fitted 
|
|
|
I Supported Toymods
Location:
Glenmore Park, NSW
Registered:
March 2004
|
|
Re: dyno sheets!
|
Tue, 11 October 2005 01:01
|
|
18RGU unknown internals seems stock as.
Quite happy with the result considering std 120hp....
less 30% to kws - (84kw) less 30% drivetrain loss 58.8rwkw.
|
|
|
Location:
sunny coast, qld
Registered:
October 2002
|
|
Re: dyno sheets! ignore this
|
Tue, 11 October 2005 01:19
|
|
| stealth007008 wrote on Tue, 11 October 2005 09:55 |
havent run it yet - just put an eboost 2 on want at least 350hp before i try. gone back to uni now funds are dry si i dont know how long it will be thinking of a highstall and 4.11 lsd but cant afford fuel as it is so we will see
|
You have 3.9:1 rear end now? If so, I would stick with that. It has proven itself in other turbo drag cars. Typically v8’s use 4.11’s. I have a very short ratio in my car and it is crap for spoolup as well as running out of revs before the end of the quarter mile.
Trap speed as in MPH at end of quarter mile.
|
|
|
Location:
perth
Registered:
June 2005
|
|
Re: dyno sheets! ignore this
|
Tue, 11 October 2005 01:37
|
|
ive got 3.7s cause of the auto
the soarers my "bunky" get around this is my project car and love of my life
it read 426 XXXkm when it was taken off the road
what can u say about this engine skippy
|
|
|
I supported Toymods
Location:
Perth
Registered:
May 2002
|
|
Re: dyno sheets!
|
Tue, 11 October 2005 02:27
|
|
|
I'm not Skip, but I'm going to say that engine is underpowered with a very sick power curve.
|
|
|
I supported Toymods
Location:
Perth
Registered:
May 2002
|
|
Re: dyno sheets!
|
Tue, 11 October 2005 02:35
|
|
| justcallmefrank wrote on Tue, 11 October 2005 10:27 |
with a very sick power curve.
|
...and/or massive boost spike.
|
|
|
Location:
Carlingford, Sydney
Registered:
May 2002
|
|
|
Location:
Ballarat, Victoria
Registered:
March 2003
|
|
Re: dyno sheets!
|
Tue, 11 October 2005 11:28
|
|
| stealth007008 wrote on Mon, 10 October 2005 21:26 |
its a before and after hiflow ct26, it made 270.2 hp at the wheels with a dead stock ct26 on 10 psi
|
so was the 300hp with the highflow ct26?
|
|
|
Location:
perth
Registered:
June 2005
|
|
Re: dyno sheets!
|
Tue, 11 October 2005 12:11
|
|
saidly yes- i expected alot better, 30 hp increase with a 5 psi increase was pretty depressing, when i spoke to the guy who hiflowed it he told me the efficiency range of the turbo will be up around 21 psi - which i never plan on running, hopefully a steady 17 psi from the eboost will make a hell of a difference - if not money was wasted.
saying that the zoom soarer pumped out 250 kw at 1 bar - 20 kw more then me with a stainless manifold and blitz turbo and generally more mods then mine so its not that bad when u look at it that way.
|
|
|
Location:
Carlingford, Sydney
Registered:
May 2002
|
|
Re: dyno sheets!
|
Tue, 11 October 2005 12:29
|
|
|
304hp is nothing to joke about
|
|
|
Location:
Ballarat, Victoria
Registered:
March 2003
|
|
Re: dyno sheets!
|
Tue, 11 October 2005 12:32
|
|
| stealth007008 wrote on Tue, 11 October 2005 22:11 |
saidly yes- i expected alot better, 30 hp increase with a 5 psi increase was pretty depressing, when i spoke to the guy who hiflowed it he told me the efficiency range of the turbo will be up around 21 psi - which i never plan on running, hopefully a steady 17 psi from the eboost will make a hell of a difference - if not money was wasted.
saying that the zoom soarer pumped out 250 kw at 1 bar - 20 kw more then me with a stainless manifold and blitz turbo and generally more mods then mine so its not that bad when u look at it that way.
|
sounds good.
was the pod, fmic, exhaust, 550cc, lexus afm, gfb bleed valve and safc done for the 270hp run?
|
|
|
Location:
perth
Registered:
June 2005
|
|
|
Location:
Carlingford, Sydney
Registered:
May 2002
|
|
Re: dyno sheets!
|
Tue, 11 October 2005 12:51
|
|
the joys aof a 3L
i wish i had another 1000cc to spool mine up with
tho i need to tune it also  check out those fat a/f's
|
|
|
Location:
perth
Registered:
June 2005
|
|
Re: dyno sheets!
|
Tue, 11 October 2005 14:54
|
|
 [/img]
ive been to mine are to lean - any idea why my curves so fucked up between 3700 and 5700rpm
what u done to your engine to cope with 23 psi - what cars it in must go like rocket
|
|
|
Location:
perth
Registered:
June 2005
|
|
Re: dyno sheets!
|
Tue, 11 October 2005 14:56
|
|
|
my car mad 170 at wheels with just an exhaust, lost the dyno print out
|
|
|
Location:
sunny coast, qld
Registered:
October 2002
|
|
Re: dyno sheets!
|
Tue, 11 October 2005 21:19
|
|
|
That AF looks pretty bloody good to me. The before one is a bit lean I suppose but the after one is spot on. Is this the stock ecu with no fuel mods what so ever?
|
|
|
Location:
Carlingford, Sydney
Registered:
May 2002
|
|
Re: dyno sheets!
|
Tue, 11 October 2005 22:30
|
|
| stealth007008 wrote on Wed, 12 October 2005 00:54 |
what u done to your engine to cope with 23 psi - what cars it in must go like rocket
|
just a stock motor
its in a ke30 corolla
|
|
|
Location:
perth
Registered:
June 2005
|
|
Re: dyno sheets!
|
Tue, 11 October 2005 23:26
|
|
stock ecu with safc adjustting fuel ratios
bigger injectors and walbro pump
have u been down the quarter?
|
|
|
Location:
Adelaide
Registered:
June 2002
|
|
Re: dyno sheets!
|
Wed, 12 October 2005 00:25
|
|
Here are the sheets for my 1FZ-FE landcruiser engine.
GT24, Autronic, internally std.
15 PSI and 19PSI curves
This is what happened once a wastegate line blew off......Have a look at the boost line! The lowest line was the old set-up when it made 281rwkw
|
|
|
Location:
Sydney
Registered:
September 2003
|
|
Re: dyno sheets!
|
Wed, 12 October 2005 00:26
|
|
^^^^^^^^^^^^^
I think we have a current winner  .
|
|
|
Registered:
August 2002
|
|
Re: dyno sheets!
|
Wed, 12 October 2005 00:37
|
|
Stock 7m.
|
|
|
Location:
Campbelltown
Registered:
November 2003
|
|
Re: dyno sheets!
|
Wed, 12 October 2005 00:41
|
|
Lol after 413,000km the toyota is still going strong.
|
|
|
Location:
Ballarat, Victoria
Registered:
March 2003
|
|
Re: dyno sheets!
|
Wed, 12 October 2005 00:59
|
|
| BlackSupra wrote on Wed, 12 October 2005 10:37 |
Stock 7m.
|
is that yours glen? 
can i have it?
|
|
|
Registered:
August 2002
|
|
Re: dyno sheets!
|
Wed, 12 October 2005 01:24
|
|
yes it is.
no you cant. 
|
|
|
I supported Toymods
Location:
Sutho/Hills NSW
Registered:
September 2002
|
|
Re: dyno sheets!
|
Wed, 12 October 2005 01:48
|
|
|
|
|
Location:
Newcastle
Registered:
June 2004
|
|
Re: dyno sheets!
|
Wed, 12 October 2005 02:04
|
|
| BlackSupra wrote on Wed, 12 October 2005 10:37 |
Stock 7m.
|
Awesome Looking graph very smooth and large kw  I thought it was far from stock though  Or u talking stock internals ?
|
|
|
Registered:
August 2002
|
|
Re: dyno sheets!
|
Wed, 12 October 2005 02:07
|
|
| WantaTurbo wrote on Wed, 12 October 2005 12:04 |
| BlackSupra wrote on Wed, 12 October 2005 10:37 |
Stock 7m.
|
Awesome Looking graph very smooth and large kw I thought it was far from stock though Or u talking stock internals ?
|
'Yes officer its all stock'
|
|
|
Location:
Parramatta
Registered:
July 2002
|
|
Re: dyno sheets!
|
Wed, 12 October 2005 03:39
|
|
here is an old dyno sheet
sorry for the wrong way round, but as i said it old and i couldnt be bothered re hosting
mr2 - 3sgte
soon to be getting this re-dynoed in the comming weeks i will re-post the results hoping for a tad more.
|
|
|
I supported Toymods
On probation
Location:
Brisbane, Queensland
Registered:
January 2003
|
|
Re: dyno sheets!
|
Wed, 12 October 2005 03:52
|
|
Stock 3TGTEU
1GGTE intercooler front mounted
K&N Airfilter
2 1/2" mandrel bent exhaust
|
|
|
Location:
Campbelltown
Registered:
November 2003
|
|
Re: dyno sheets!
|
Wed, 12 October 2005 03:52
|
|
|
Had to be the odd one out and point it the pther way didn't you, nice power though
|
|
|
Location:
perth
Registered:
June 2005
|
|
Re: dyno sheets!
|
Wed, 12 October 2005 04:04
|
|
HELP!! how come my tuner genenerated a constand afr (straight line from start to finish) where as everyone else is jaggered and starts of very high at low rpm yet the power curve is still smooth and afr kept below 12 at high rpm...
|
|
|
Location:
Ballarat, Victoria
Registered:
March 2003
|
|
Re: dyno sheets!
|
Wed, 12 October 2005 07:46
|
|
glen-
very impressive. when you are in victoria, or i am in sydney, you are taking me for a ride.
thanks.
ryley
|
|
|
hence the fucked graph above 3500rpm 
