| Author | Topic |
|---|
Location:
Inner west,Sydney
Registered:
October 2004
|
|
Complete 1993 300ZX ( R200 4.08/1 LSD)diff cradle
|
Tue, 11 October 2005 01:14
|
 |
NOT splitting it up, complete cradle,the lot or nothing, low Ks(80,000)LSD, halfshafts(CV type),hubs, brakes.$650 definately no offers, buyer must arrange pickup, will not fit in a letterbox. Not made by Toyota, but Nissan does get it right sometimes.  pickup Leichhardt, Sydney
[Updated on: Tue, 11 October 2005 05:14]
|
|
|
Location:
Terrigal
Registered:
May 2002
|
|
Re: Complete 1993 300ZX ( 4.08/1 LSD)diff cradle
|
Tue, 11 October 2005 02:00
|
|
|
Do you know if this is a R200 diff?
|
|
|
Location:
Inner west,Sydney
Registered:
October 2004
|
|
Re: Complete 1993 300ZX ( R200 4.08/1 LSD)diff cradle
|
Tue, 11 October 2005 05:12
|
|
|
I've just changed the title, thanks, I had missed that out, There is also a power steering pump and resevoir that goes with it, probably only of use to someone swapping this rear into a 300Z TT, (they had hycas, and a different diff which was round 3.6/1) this diff out of a really well looked after NA, no accidents, was a stolen/strip and had it's compliance plate cancelled,still have papers.Diff all I have left of it.
|
|
|
Location:
Terrigal
Registered:
May 2002
|
|
Re: Complete 1993 300ZX ( R200 4.08/1 LSD)diff cradle
|
Tue, 11 October 2005 05:23
|
|
|
Thanks for that.. You dont know if the diff centre would fit a Z31 would ya?
|
|
|
Location:
Inner west,Sydney
Registered:
October 2004
|
|
Re: Complete 1993 300ZX ( R200 4.08/1 LSD)diff cradle
|
Tue, 11 October 2005 05:50
|
|
|
check it out,not sure,I think the diff might work, but has different halfshafts and hubs, anything will fit if you throw enough money at it.
|
|
|
Location:
logan river brisbane
Registered:
July 2005
|
|
Re: Complete 1993 300ZX ( R200 4.08/1 LSD)diff cradle
|
Thu, 13 October 2005 15:38
|
|
R200=Jap 9" 
|
|
|
