Author | Topic |
I Supported Toymods
Location: Lwr Templestowe, Melbourne
Registered: August 2004
|
|
|
I Supported Toymods
Location: Lwr Templestowe, Melbourne
Registered: August 2004
|
Re: [MELB] Auto-electricians..?
|
Tue, 11 October 2005 09:17
|
|
bump...
If no reply, then its time to bite the bullet and go get reamed by a recognised dealer.
|
|
|
Location: Melb, Victoria
Registered: April 2004
|
Re: [MELB] Auto-electricians..?
|
Tue, 11 October 2005 09:32
|
|
yian, depending on what type of immoblisation ur car has.(eg. single point immob, or mutilple. fuel pump, ign cut, crank wire cut etc.)will effect the installation, and what has to be done.
All they usually do is put in an additional relay to switch on the immob once the turbo timer has turned off.
Someone at Autobarn can do this. The guy at the Doncaster one is pretty good, and it will most likely be cheaper than paying an auto elec and hourly rate to fit it.
Hope this helps
|
|
|
Location: Bulleen, Melbourne
Registered: June 2002
|
Re: [MELB] Auto-electricians..?
|
Tue, 11 October 2005 09:49
|
|
Try that place on Manningham Rd/Banksia St, Kendon Auto elecs I think it is. Always has nice rotaries there, so must be decent.
|
|
|
I Supported Toymods
Location: Lwr Templestowe, Melbourne
Registered: August 2004
|
Re: [MELB] Auto-electricians..?
|
Tue, 11 October 2005 14:46
|
|
Thanks for the tips guys Much appreciated. Will call 'em both tomorrow (or today rather) and find out. Fingers crossed it'll be cheaper than the $180 the Dynamco dealer quoted me eh?
Yian
|
|
|