| Author | Topic |
|---|
Location:
brisbane
Registered:
December 2004
|
|
162 wheel bearings / stud axle (front)
|
Wed, 12 October 2005 06:44
|
 |
im replacing my wheel bearings in the front because one is totally gone when the wheel was one the car and i jacked it up i could move the wheel fowerd back up and down about 5mm each way, so i gather its the wheel bearing ive got the driveshafts out etc etc, i go to take the hub off and i thought id have a shot at it on the car haha, but thats besides the point so i gave the stub axle a hit and it just came off it was lose, so im wondering why this is, is it because the bearings are stuffed and they assist holding it on or do i have bigger trouble
also the other side is tight like it is supost to be, has to be pressed off
so is the hub its self stuffed or was it just because of the bearings being stuffed?
thanks
|
|
|
Location:
brisbane
Registered:
December 2004
|
|
Re: 162 wheel bearings / stud axle (front)
|
Wed, 12 October 2005 09:50
|
|
|
bump
|
|
|
Location:
Newcastle
Registered:
July 2003
|
|
Re: 162 wheel bearings / stud axle (front)
|
Wed, 12 October 2005 10:40
|
|
|
good chance the hub is stuffed and you'll need a new hub.
|
|
|
