| Author | Topic |
|---|
Registered:
May 2002
|
 2TGZEU Super Charger Conversion
|
Sun, 16 October 2005 02:16
|
 |
As title states i have all you need for the conversion - $400;
- SC12 charger with standard inlet/outlet piping
- A\C bracket
- Crank pulley
- belt tensioner
It's pretty much a straight forward bolt on if your crafty with plumbing. I had no choice but to give up as my QTB's don't allow enough room for the charger to fit between the engine mount and the QTB's.
I can assist you with how to do the conversion if required. I'm in Adelaide.
Will consider a swap for a set of race cams to suit a 2TG.
Frank
0438827504
|
|
|
Location:
ipswich queensland
Registered:
April 2004
|
|
Re: 2TGZEU Super Charger Conversion
|
Sun, 16 October 2005 20:43
|
|
i have a pair of 288 degree cams if your interested in swapping.
specs
CAM LIFT IN 0.414"
CAM LIFT EX 0.414"
ADV DURATION IN 286
ADV DURATION EX 286
DURATION @ .050 IN 236
DURATION @ .050 EX 236
LOBE CENTRE IN 103
LOBE CENTRE EX 107
LOBE SPLIT 105
ADVERTISED/@0.050 TIMING
IN OPEN 40 BTDC / 15 BTDC
IN CLOSE 66 ABDC / 41 ABDC
EX OPEN 70 BBDC / 45 BBDC
EX CLOSE 36 ATDC / 11 ATDC
laterdays
|
|
|
Location:
Pilbara
Registered:
November 2004
|
|
Re: 2TGZEU Super Charger Conversion
|
Mon, 17 October 2005 00:42
|
|
| Quote: |
It's pretty much a straight forward bolt on if your crafty with plumbing.
|
Does not sound so straightforward to me. Hardest bit would be the plumbing yeah? If this does not come with piping/plumbing to fit it's not really a 'conversion'.
|
|
|
Registered:
May 2002
|
|
Re: 2TGZEU Super Charger Conversion
|
Mon, 17 October 2005 03:35
|
|
Okay, Maybe i used the term 'conversion' quite loosely here but with the standard EFI manifold there seems to be enough room in there to swing your hips to the top 40.
Yes, the challenging part would be the plumping, but not anything too difficult if utilising sections from the original piping. I was looking at increasing the size of the piping to at least 2.5 inches to increase flow at top end and i could see the potential.
I only got as far as trying to fit the charger around my setup so i couldn't develop any templates as far as piping is concerned.
Frank
|
|
|
Location:
Devonport Tasmania
Registered:
June 2004
|
|
Re: 2TGZEU Super Charger Conversion
|
Tue, 18 October 2005 11:47
|
|
could you pm me with pics please 
|
|
|
Location:
ipswich queensland
Registered:
April 2004
|
|
Re: 2TGZEU Super Charger Conversion
|
Tue, 18 October 2005 11:59
|
|
i think its already gone, unless u have a better offer them me that is. 
laterdays
|
|
|
Registered:
May 2002
|
|
Re: 2TGZEU Super Charger Conversion
|
Tue, 18 October 2005 22:36
|
|
As the don would say; 'lilcrash' has made me an offer i couldn't refuse.
|
|
|
Location:
Perth
Registered:
August 2003
|
|
Re: 2TGZEU Super Charger Conversion
|
Wed, 19 October 2005 07:22
|
|
| 7mgtema71 wrote on Wed, 19 October 2005 06:36 |
As the don would say; 'lilcrash' has made me an offer i couldn't refuse.
|
ah one of "them" offers 
|
|
|
