| Author | Topic |
|---|
Location:
Toowoomba, QLD
Registered:
July 2003
|
 My MZ10 project...... Finally nearing completion..;)
|
Mon, 24 October 2005 10:36
|
 |
Hi there...
I been around here a while now, but only occasionally post.
Just thought I would throw up some details on what I have been tirelessly working on.
The car in question is a 1984 MZ10... The original engine has sinse been removed, and has been replaced with a modified Twin turbo 1GGZE engine.
Specs are :
ENGINE
1GGZE Short Motor
1GGTE Inlet Manilfold
7MGTE injectors in a dual feed fuel rail fed by Bosch 600hp pump
ENGINE ACCESSORIES
Microtech LTX-12S with 3 bar map sensor
EF Falcon coils
Turbo's are 2 x T25g (ex sr20 red top)
On 25mm steam pipe manifolds
2.5" dumps
3" Exhaust system
Twin Pod Filters
600x300x100 Bar and Plate Intercooler
Oil Cooler Kit, with Filter relocation
Greddy Profec B Spec II Boost Controller
DRIVELINE
W57 Gearbox
5 Puck Carbotics Clutch.. 2900lb Custom built clutch from a M3 BMW Clutch (Thanks to Jim Berry Raceclutch)
Locked diff
SUSPENSION
Loweered springs
Koni Yellow Inserts in Front
Koni Yellow Shocks in rear
Nolathane bushes (yet to be fitted)
Got a few additions inside, but the picture tell the story
This is more that I want to do with it..
These are :
Bigger brakes (z32 4spots)
5 Stud conversion
Get some better wheels
Get it tuned ( this is booked for next Tuesday)
I hope you like it
Cheers
Jamie
|
|
|
Location:
Central Coast, NSW
Registered:
February 2005
|
|
Re: My MZ10 project...... Finally nearing completion..;)
|
Mon, 24 October 2005 13:35
|
|
whoa, that is damn cool! keep us informed as you find out the power figures it puts out!
Nice work!
|
|
|
I supported Toymods
Location:
Adelaide
Registered:
July 2004
|
|
Re: My MZ10 project...... Finally nearing completion..;)
|
Tue, 25 October 2005 02:34
|
|
sleeper spec...i love it!
hows the lag on the T25G's?
|
|
|
Registered:
December 2003
|
|
Re: My MZ10 project...... Finally nearing completion..;)
|
Tue, 25 October 2005 05:36
|
|
u have a PM 
|
|
|
Location:
Toowoomba, QLD
Registered:
July 2003
|
|
Re: My MZ10 project...... Finally nearing completion..;)
|
Tue, 25 October 2005 06:42
|
|
It isn't too lagy... But is very hard to gauge on rpm without a tacho...
BTW this is still on a Microtech base map, so lag might be reduced a little with a tune and some serious timing..
Cheers
Jamie
|
|
|
Location:
Perth, WA
Registered:
September 2003
|
|
Re: My MZ10 project...... Finally nearing completion..;)
|
Wed, 26 October 2005 05:43
|
|
MZ10 soarer... old skool!! love it.. love it.
Bet she goes rather nicely too! 
cheers
Damo
TRD 83
|
|
|
