| Author | Topic |
|---|
Location:
Sydney
Registered:
May 2002
|
|
|
Location:
Sydney
Registered:
May 2002
|
|
|
Location:
Melbourne
Registered:
May 2002
|
|
Re: 1JZ-GTE Top feed fuel rail and misc other surplus parts
|
Thu, 27 October 2005 08:41
 
|
 |
I've been SOO eyeing off that fuel rail on soarercentral  If you still have it a bit down the line i'll snap it up off ya!
|
|
|
Location:
Sydney
Registered:
May 2002
|
|
Re: 1JZ-GTE Top feed fuel rail and misc other surplus parts
|
Sun, 30 October 2005 03:29
|
|
ReQuieM
Unfortunately for you and a few others interested in the rail, it's been sold.
|
|
|
Registered:
August 2005
|
|
Re: 1JZ-GTE Misc Surplus parts
|
Sun, 30 October 2005 13:59
|
|
are those injectors bigger than standard
|
|
|
Location:
Sydney
Registered:
May 2002
|
|
Re: 1JZ-GTE Misc Surplus parts
|
Sun, 30 October 2005 23:42
|
|
| skyline wrote on Mon, 31 October 2005 00:59 |
are those injectors bigger than standard
|
Standard what?
Specs are-
Impedance: 13.6 Ohms
Flows 400cc/min at 3 Bar base fuel preesure @ 0.70ms or 440cc/min at 3.5 Bar base fuel pressure @ 0.78ms
4 hole pintle design.
|
|
|
Registered:
August 2005
|
|
Re: 1JZ-GTE Misc Surplus parts
|
Mon, 31 October 2005 03:30
|
|
|
is that biger than standard neo injectors
|
|
|
Location:
Sydney
Registered:
May 2002
|
|
Re: 1JZ-GTE Misc Surplus parts
|
Mon, 31 October 2005 05:30
|
|
Sorry mate, no idea about standard Neo specs - I was just told these were a drop in replacement for the Neo and 2ZZ engines.
If it's any help for comparison's sake, on a 2.5L VVTi 1JZ-GTE, these injectors will flow enough fuel for 250+rwkw at standard base pressure and then some depending on how high you bump the rail pressure up.
|
|
|
Location:
Sydney
Registered:
May 2002
|
|
Re: 1JZ-GTE Misc Surplus parts
|
Fri, 04 November 2005 01:56
|
|
Remaining parts updated.
Bump!
|
|
|
Location:
Melbourne
Registered:
March 2003
|
|
Re: 1JZ-GTE Misc Surplus parts
|
Sat, 05 November 2005 22:36
|
|
Since you have both fan types there... which one do i need.
Email sent
|
|
|
Location:
Sydney
Registered:
May 2002
|
|
Re: 1JZ-GTE Misc Surplus parts
|
Tue, 08 November 2005 02:55
|
|
| acmtt wrote on Sun, 06 November 2005 09:36 |
Since you have both fan types there... which one do i need.
Email sent
|
Hydrualic setup in your case would be my guess.. but you'd be better off finding a complete JZA70/JZX90 radiator/fan/shroud/motor drive assembly rather than just pieces at a time. 
|
|
|
