| Author | Topic |
|---|
Location:
townsville NQLD
Registered:
February 2004
|
|
|
Location:
townsville NQLD
Registered:
February 2004
|
|
Re: ~~6MGE complete. engine, loom, ecu etc + PICS~~
|
Fri, 04 November 2005 08:24
 
|
 |
better post up some pics. dont bother asking, AFM is there , just not in the pic 
here they are......
|
|
|
Location:
townsville NQLD
Registered:
February 2004
|
|
Re: ~~6MGE complete. engine, loom, ecu etc + PICS~~
|
Sat, 05 November 2005 09:19
|
|
bump.
there are a couple people interested so i guess its first in best dressed.
|
|
|
Location:
townsville NQLD
Registered:
February 2004
|
|
Re: ~~6MGE complete. engine, loom, ecu etc + PICS~~
|
Sun, 06 November 2005 09:43
|
|
i think $1100 is a bit steep so best offer in the triple figures takes it 
|
|
|
like it was driven yesterday. even though it was sitting, there was toyota coolant in the radiator. there are no signs of cappachino in the oil cap either. we ran the car for about 30-40 mins and temperature DID NOT budge from the bar below the middle. engine did seem to run with considerable smoothness considering it had old crusty plugs and leads and probly stale fuel. only problem with this engine that we think is attributed to the prolonged sitting is that it does blow s little smoke on rev out. we had it idleing and every 5 or so miuntes we would give it a rev and some smoke would come out. we do suspect that hardened valve stem seals are to blame for the problem.
