Author | Topic |
Location: brisbane
Registered: December 2004
|
turbo oil feed position
|
Wed, 09 November 2005 05:17
|
|
im in the process of getting my exhaust manifold made, but ive ran into a problem the only way for the turbo to fit in the engine bay without hacking up the bonnet is to mount the core so the oil feed/return's sit on a 90degree angle, the only problem i see is oil sitting in the bottom of the core or would the pressure keep pushing the hot oil out and replace it with cooler oil
thanks
its a gt30r if that helps
|
|
|
Registered: May 2002
|
Re: turbo oil feed position
|
Wed, 09 November 2005 05:22
|
|
The oil drain must be at the bottom!
Surely a tight right angle bend straight out of the core for the oil feed would help????????/
|
|
|
Location: brisbane
Registered: December 2004
|
Re: turbo oil feed position
|
Wed, 09 November 2005 05:36
|
|
nah the oil feed hitting on the bonnet is not the problem, the manifold is himount and if the manifold is extended to change the position it will hit on the bonnet most likely
|
|
|
Location: brisbane
Registered: December 2004
|
Re: turbo oil feed position
|
Wed, 09 November 2005 05:39
|
|
if that helps explain things, so the oil line must be vertical, im 90% sure i "think" i remeber reading it in the destructions it came with but there lost haha
|
|
|
Registered: May 2002
|
Re: turbo oil feed position
|
Wed, 09 November 2005 05:48
|
|
Sorry I am very confused now. You can rotate the core independently of the compressor housing and exhaust housing so I am not understanding the problem.
Sorry.
|
|
|
Location: brisbane
Registered: December 2004
|
Re: turbo oil feed position
|
Wed, 09 November 2005 05:53
|
|
i know this lol... i just had the biggest brain fart ever... to much stress just realised before i checked the thread again haah
toymods biggest deadshit lol
thanks
|
|
|
Registered: May 2002
|
Re: turbo oil feed position
|
Wed, 09 November 2005 05:55
|
|
Quote: | i know this lol... i just had the biggest brain fart ever... to much stress just realised before i checked the thread again haah
toymods biggest deadshit lol
thanks
|
cool, so you are just going to rotate the core and all is well then
|
|
|
Location: brisbane
Registered: December 2004
|
Re: turbo oil feed position
|
Wed, 09 November 2005 06:00
|
|
yes as any person in a normal state of mind would have done but me being me doesntt think until after hes spoken
|
|
|