| Author | Topic |
|---|
Location:
Melbourne
Registered:
June 2003
|
|
3TGTE wiring issues
|
Fri, 11 November 2005 09:39
|
 |
Hi, hope that someone could help me with the wiring on the standard ignitor on the 3TGTE.
here is a simple diagram of the Ignitor, and each wire/connection numbered.
IGNITOR:
----------
|1. 6.|
|2. 7.|
|3. 8.|
|4. 9.|
|5. |
| |
| |
----------
1.GREEN - round green 3 pin plug with 2. and a brown wire which is cut off
2.BLUE - same as 1.
3.WHITE - with 4. to dizzy
4.RED - with 3. to dizzy
5.BROWN short wire (to a coil?)
6.BLACK short wire (to a coil?)
7.YELLOW -joins into 8. and goes to loom joining to IG
8.PINK refer to 7.
9.BLACK short wire (to a coil?)
Dizzy has a white and brown, which colour to which?
2 coils, two + and two -. what goes where?
coil1 + (10.) coil1 - (11.)
coil2 + (12.) coil2 - (13.)
14. There is a red wire in the loom which i assume would go onto one of the coils also? (wire joins ignition relay/THW black plug at manifold)
On the car:
15. Black/red (coil + )
16. black (coil - )
17. black/yellow (resistor + )
hope someone can help
Thanks..
|
|
|
Location:
Perth
Registered:
August 2003
|
|
|
