| Author | Topic |
|---|
Location:
Gawler SA
Registered:
September 2005
|
|
AE86 Ducktail Spoiler Mould and Skirt Moulds
|
Wed, 16 November 2005 02:41
|
 |
Hello, I got these a few weeks back from here, and have now made myself the spoiler and skirts that were required, so they are once again up for sale. $100 for all the moulds OBO. No longer needed, make an offer.
Chris
|
|
|
Location:
Melbourne, West Suburbs
Registered:
April 2005
|
|
Re: AE86 Ducktail Spoiler Mould and Skirt Moulds
|
Wed, 16 November 2005 03:03
|
|
|
ill offer you $50 for the spoiler mould
|
|
|
Registered:
September 2005
|
|
Re: AE86 Ducktail Spoiler Mould and Skirt Moulds
|
Wed, 16 November 2005 03:23
|
|
|
if some one here in melbourne buys i will gkladly make up there shit for em in exchange for a wing and side skirts as i am skilled in the way of the fibre lol
|
|
|
Location:
Gawler SA
Registered:
September 2005
|
|
Re: AE86 Ducktail Spoiler Mould and Skirt Moulds
|
Wed, 16 November 2005 05:37
|
|
$60 and you can have both of them.  . Not sure as to how they would need to be transported. If you have any ideas let me know, if not I will ring round the bus depots etc and see what I can find out about it.
Chris
|
|
|
Registered:
September 2005
|
|
Re: AE86 Ducktail Spoiler Mould and Skirt Moulds
|
Wed, 16 November 2005 06:59
|
|
|
hey mate uve got pm
|
|
|
Location:
Melbourne, West Suburbs
Registered:
April 2005
|
|
Re: AE86 Ducktail Spoiler Mould and Skirt Moulds
|
Wed, 16 November 2005 11:58
|
|
|
Yeah mate, if you can find out how much it will cost to deliver it, i might take it.
|
|
|
Location:
Gawler SA
Registered:
September 2005
|
|
Re: AE86 Ducktail Spoiler Mould and Skirt Moulds
|
Thu, 17 November 2005 11:13
|
|
Hello,
the mould is too big to send through australia post, and would have to be sent via greyhound busses, which would require me to drive 70 odd K's to drop it at their city depot, which isnt happening at this stage (which for what I am asking its not really worth it, easier just to scrap it at that rate), so its local buyers only I think.
Chris
|
|
|
Location:
Melbourne S.E suburbs
Registered:
May 2005
|
|
Re: AE86 Ducktail Spoiler Mould and Skirt Moulds
|
Thu, 17 November 2005 15:53
|
|
|
someone buy them and make cheap skirts and spoilers. so i can buy some off you.
|
|
|
Location:
South Australia
Registered:
November 2004
|
|
Re: AE86 Ducktail Spoiler Mould and Skirt Moulds
|
Thu, 17 November 2005 20:41
|
|
|
I haven't used fibreglass before, how hard are they to make? Please email details to buxly001@students.unisa.edu.au. I'm in Adelaide.
|
|
|
Location:
Gawler SA
Registered:
September 2005
|
|
Re: AE86 Ducktail Spoiler Mould and Skirt Moulds
|
Thu, 17 November 2005 23:09
|
|
There is a set of instrucitons that came with the moulds when I got it for you to read through.
Basically its a case of sponging in some release agent, letting it dry for a few hours, then you can just lay the fibreglass matting straight into the mould, wet it down with the polyester resin and let it cure for a day or three before you tear it out. Anyone can do it, and with a bit of practice you would be able to do it well.
Chris
|
|
|
Location:
South Australia
Registered:
November 2004
|
|
Re: AE86 Ducktail Spoiler Mould and Skirt Moulds
|
Fri, 18 November 2005 06:43
|
|
I will take them but I need to know how much room do you need to do this, and what environment does it need to cure? I live in a unit so I need to know if I have enough space. Can you please email or PM me your number. Also can you send pics of the moulds and the finished products to my email address.
Cheers
Len
|
|
|
Location:
Gawler SA
Registered:
September 2005
|
|
Re: AE86 Ducktail Spoiler Mould and Skirt Moulds
|
Sun, 20 November 2005 02:18
|
|
|
SOLD
|
|
|
