| Author | Topic |
|---|
Location:
Perth
Registered:
July 2004
|
|
AW11 turbo manifold, also suit fwd 4A
|
Sun, 04 December 2005 10:45
|
 |
Made this manifold for my AW11, but I've decided not to go ahead with it all. Manifold has never been fitted, is in perfect condition. Has T25 style flange on at the moment, I can supply a T3 flange with it if someone wants it. I'm asking $600 ono, plus postage from perth if applicable. I think I can get it airbagged for about $20. Not much else to add, feel free to ask questions. It's made from 5mm steam pipe, and the flanges have both been faced.
Images below:
[Updated on: Sat, 10 December 2005 10:39]
|
|
|
Location:
Perth
Registered:
July 2004
|
|
Re: AW11 turbo manifold, also suit rwd/fwd 4A
|
Tue, 06 December 2005 10:51
|
|
|
Bump...someone out there has to want this?
|
|
|
Location:
Hobart
Registered:
May 2005
|
|
Re: AW11 turbo manifold, also suit rwd/fwd 4A
|
Wed, 07 December 2005 02:54
|
|
I dont think you will what yout want for it, as i got for $700 a custom high mount stainless one, which is also tuned length.
Might want to reconsider your asking price.
Iain
|
|
|
Location:
Melbourne
Registered:
October 2004
|
|
|
Location:
Perth
Registered:
July 2004
|
|
Re: AW11 turbo manifold, also suit rwd/fwd 4A
|
Thu, 08 December 2005 10:39
|
|
I'm not really sure what these things are worth, but the welds are proffessional standard, the tube design is so that it can clear the oil filter and other crud like that...etc. I could paint it, and it'd look 10times better, but it's going to burn off in ten seconds and smell terrible. There's an awful amount of work in one of these things, far more than a stainless one (which I can do if anyone wants one), because the pipe is so thick. There's butting the joints, , joining the tubes...etc.
If someone wants to make a reasonable offer, it won't be refused.
RM.
|
|
|
Location:
caibs
Registered:
January 2005
|
|
Re: AW11 turbo manifold, also suit rwd/fwd 4A
|
Thu, 08 December 2005 10:50
|
|
|
$50.
|
|
|
Location:
Perth
Registered:
July 2004
|
|
Re: AW11 turbo manifold, also suit rwd/fwd 4A
|
Fri, 09 December 2005 00:24
|
|
I'll ignore that. By the way, this is not an ae86 manifold (although it would work well as one), it's designed for an AW11, which has a much tighter engine bay.
RM.
|
|
|
Location:
caibs
Registered:
January 2005
|
|
Re: AW11 turbo manifold, also suit rwd/fwd 4A
|
Fri, 09 December 2005 01:37
|
|
seriously, its only worth about $50.
the quality of the welds may be nice and dandy but look at the design of the thing, 'ghetto' is an understatement.
|
|
|
Location:
Perth
Registered:
July 2004
|
|
Re: AW11 turbo manifold, also suit rwd/fwd 4A
|
Sat, 10 December 2005 10:33
|
|
|
Well, feel free to pick holes in the design, I'd be interested to hear it. There isn't much you can change on it, there's not much room. The only other design I've seen has the #1 and #4 cylinders 'T' into each other behind the down pipe, and then feed straight across and into it. That's why mine is where it is, smooth flow.
|
|
|
Location:
Perth WA
Registered:
December 2003
|
|
Re: AW11 turbo manifold, also suit rwd/fwd 4A
|
Sat, 10 December 2005 10:42
|
|
in this modern age we still cant rule out time wasting thread flamers. buy it or not, quit talking sh!t.
this manifold is a direct replica of Carl Crawford's from speedsource.net which is copied from the long-out-of-production HKS manifold that was of limited release. so i suggest if you have any "constructive criticism" direct it to Japan and quit wasting the bandwidth of this server.
Mullet has used MY OWN jig to make this, this manifold design has brought an aw11gte 208hp at 10psi on a t25g with great driveability.
|
|
|
