| Author | Topic |
|---|
Location:
Melbourne
Registered:
October 2004
|
|
best cam for 4agze???
|
Sun, 11 December 2005 15:01
|
 |
what the best cam i should put into my 4agze??? any idea???
engine: ae92 late 4agze 165ps
ecu: microtech
with after market pully now pull 109.1kw at the wheel
looking for cam want more power..
please help 
|
|
|
Location:
Toronto, Downtown
Registered:
September 2004
|
|
Re: best cam for 4agze???
|
Sun, 11 December 2005 20:56
|
|
what do you want top end power mid range talk decent idle quality????
|
|
|
Location:
Perth
Registered:
January 2005
|
|
Re: best cam for 4agze???
|
Mon, 12 December 2005 03:52
|
|
Hi,
I used Wade 267, 8mm cams in my AW11 GZE completely stock head otherwise. After tweaking timing, idle is essentially stock, low end lost a fair bit, mid and upper rpm torque are both improved. The car is quicker overall except from the 'traffic lights' if you know what I mean - the instant 2000rpm torque is gone. Instead its a few hundred (say 2700rpm) higher up the rev range.
Torque drop off at higher revs is greatly reduced over stock.
I know of someone who had just HKS 264's (they didn't know at first) and their car seemed stock (but strong) and was a second faster than a stock AW11SC on the quarter.
Cheers, Nick
PS: See my website for a video of my car with these cams
|
|
|
