| Author | Topic |
|---|
Location:
Montrose, VIC
Registered:
May 2002
|
|
4AGZE oversized pulley kit
|
Fri, 07 June 2002 14:25
|
 |
How many people would be interested in an oversized crank pully kit for the 4AGZE? I may be able to get ahold of a number of these for around $350 a kit (comes with pulley, belt and instructions)
Probably best if you email me mrshin@autospeed.comand let me know if you're interested
|
|
|
Location:
Taree, 4h nth of syd
Registered:
May 2002
|
|
Re: 4AGZE oversized pulley kit
|
Sat, 08 June 2002 02:18
|
|
what size pully kit is it???
i can also get the 14psi kit for $350
|
|
|
Location:
Montrose, VIC
Registered:
May 2002
|
|
Re: 4AGZE oversized pulley kit
|
Sat, 08 June 2002 11:39
|
|
|
Not actually sure what size it is, I'll try and measure it in the next day or two if you like. It is however the maximum sized pulley you can fit between the water pump and itself, clearance is about 2 thirds of stuff all.
|
|
|
Location:
Taree, 4h nth of syd
Registered:
May 2002
|
|
Re: 4AGZE oversized pulley kit
|
Sat, 08 June 2002 19:18
|
|
hey,
if its the biggest then its the 14psi kit, im sure thats it, but then again iam alittle tipsy at the moment at it is 5:20am, just drove home, hehehe
|
|
|
Location:
Western Sydney
Registered:
May 2002
|
|
Re: 4AGZE oversized pulley kit
|
Sun, 09 June 2002 05:00
|
|
Hey guys,
So you are both selling 175mm pulley kits? Do they come with idler pulley and a new timing marker? Also what are the pulleys made out of?
Cheers
|
|
|
Location:
Taree, 4h nth of syd
Registered:
May 2002
|
|
Re: 4AGZE oversized pulley kit
|
Sun, 09 June 2002 07:42
|
|
the kit comes with idler, belt, crank pulley, and instructions
the one my friend can get is the trd one or hks one, im not 100% witch one, i can find out tonight tho
whiteGZE, did u put the dash in your car??? what box u running?? ive just done the conversion to my ae82 as well
what model gze engine u running??
|
|
|
Location:
adelaide
Registered:
May 2002
|
|
Re: 4AGZE oversized pulley kit
|
Sun, 09 June 2002 07:44
|
|
hi
have you got any pictures of the kits im also interested
and were are they made from.
my email is trd2nv@hotmail
|
|
|
I supported Toymods
Location:
NE Melbourne
Registered:
May 2002
|
|
Re: 4AGZE oversized pulley kit
|
Sun, 09 June 2002 08:08
|
|
i'd be interested in a kit for $350 (tree fiddy) let me know if and when they are available... i'll pay shipping to melbourne too!!!
|
|
|
Location:
Western Sydney
Registered:
May 2002
|
|
Re: 4AGZE oversized pulley kit
|
Sun, 09 June 2002 09:59
|
|
Hey Darola
Didn't put the dash in since I just got the engine and not a halfcut. Running a ae92 map gze with standard ge gearbox. The car is otherwise totally stock. It's been over a year now since I've put the engine in and I still haven't been able to raise the funds for mods. Damn uni!! 
|
|
|
Registered:
June 2002
|
|
Re: 4AGZE oversized pulley kit
|
Sun, 09 June 2002 10:15
|
|
|
Im looking for a 175mm pulley kit, can anyone help im in Sydney.
|
|
|
Location:
Montrose, VIC
Registered:
May 2002
|
|
Re: 4AGZE oversized pulley kit
|
Sun, 09 June 2002 10:50
|
|
It's the same size as the cusco one, as for what comes with it etc. sorry, can't say just at the moment! I'll chase it up on tuesday morning (long weekend.... everyones zzzz....) 
|
|
|
Registered:
May 2002
|
|
Re: 4AGZE oversized pulley kit
|
Mon, 10 June 2002 15:23
|
|
|
i am interested in it for sure
|
|
|
Location:
Taree, 4h nth of syd
Registered:
May 2002
|
|
Re: 4AGZE oversized pulley kit
|
Mon, 10 June 2002 15:45
|
|
i will find out exactly what brand will be sent to me, i know for sure the kit i can get comes with pulley, idler, belt and instructions,
i can get them off a friends mate in nz, he is running the 14psi kit on his 101 gze levin
|
|
|
Location:
Maroubra
Registered:
June 2002
|
|
Re: 4AGZE oversized pulley kit
|
Tue, 11 June 2002 00:22
|
|
I just e-mailed you...
look forward to hearing from you soon
|
|
|
Location:
Sydney
Registered:
May 2002
|
|
Re: 4AGZE oversized pulley kit
|
Tue, 11 June 2002 03:54
|
|
Im very very interested in one of these kits.. as long as it aint no freaking cast iron jobby.. If it is ill go the nevo cause its nice n light.
|
|
|
I supported Toymods
Location:
NY
Registered:
May 2002
|
|
Re: 4AGZE oversized pulley kit
|
Tue, 11 June 2002 03:56
|
|
da rolla, do u drive a white ae82 sedan?? with the plates daro1a??? if so are u a nthern beaches local???
LP
plates:STI11f
CAR:white ae92 SX
Engine:4age-soon 20V
Speed:slow 
|
|
|
Location:
Taree, 4h nth of syd
Registered:
May 2002
|
|
Re: 4AGZE oversized pulley kit
|
Tue, 11 June 2002 07:13
|
|
hi there Leighp, how r u?? yes that is me  i live around the street from you
|
|
|
Location:
Taree, 4h nth of syd
Registered:
May 2002
|
|
Re: 4AGZE oversized pulley kit
|
Tue, 11 June 2002 07:33
|
|
I can get 14psi pulley kit, can deliver in Sydney only
need numbers for orders as can only order as bulk, kit is coming from overseas, kits r custom made for own specs (note by-pass valve modiforcations r in order to run 14psi kit), can also get 10 and 12 psi kits (note: these kits r good if dont want to add octane boost, as 14psi kit need 100+ octane or will ping)
pulleys r made of aircraft alloy, high strenght low weight, will need to run genuine toyota thermostat.
pulley kits are $400 inc shiping, will hand deliver (sydney only)
can fit for $500 plus $100 for thermostat + coolant
very noticeable power increase  
email me on 2tezzu@froggy.com.auand leave name and number so can contact to confirm
can be fitted in half a day, need to allow 6weeks for delivery
|
|
|
I supported Toymods
Location:
NY
Registered:
May 2002
|
|
Re: 4AGZE oversized pulley kit
|
Tue, 11 June 2002 09:19
|
|
well drop me an email, if that other message is your email...2tezzu@froggy.com.authen i have emailed u
LP
|
|
|
Registered:
May 2002
|
|
Re: 4AGZE oversized pulley kit
|
Tue, 11 June 2002 14:32
|
|
i am interested in this pulley kit
but would like more information,
e.g picture and a brand name
|
|
|
Location:
Maroubra
Registered:
June 2002
|
|
Re: 4AGZE oversized pulley kit
|
Wed, 12 June 2002 01:23
|
|
Darola,
are you saying that you have to run a nos kit with the 14 psi??
even at low boost or is that just when you push to the limits??
keep me posted as i am very keen... i got a couple of cars that i need to have a go at and i prefer to do it with 14psi instead of 8!
|
|
|
Location:
Taree, 4h nth of syd
Registered:
May 2002
|
|
Re: 4AGZE oversized pulley kit
|
Wed, 12 June 2002 03:17
|
|
gremlin,
no u dont need nos, just have to change a couple little things around (abit of a secret )
|
|
|
Location:
Montrose, VIC
Registered:
May 2002
|
|
Re: 4AGZE oversized pulley kit
|
Wed, 12 June 2002 08:41
|
|
|
I had a talk to the guy today (briefly...) and the pulleys are aluminium, but he doesn't seem so sure if they're available any more! Aarrgghhh... I'll chase it up tomorrow, and let you peoples know what the deal is.
|
|
|
Location:
Montrose, VIC
Registered:
May 2002
|
|
Re: 4AGZE oversized pulley kit
|
Wed, 12 June 2002 09:31
|
|
|
Hey peoples, those who have emailed me, I HAVE been replying, but if it didn't get through, sorry! Damn computer keeps dying in the arse every time I hit send, so not sure if any messages are getting through... Sorry guys!
|
|
|
Location:
Maroubra
Registered:
June 2002
|
|
Re: 4AGZE oversized pulley kit
|
Wed, 12 June 2002 23:45
|
|
sorry about that darola...
i just completely misread... for a change i had something on my mind other than SEX... i've been contemplating the NOS fogger...
but that's a story for another time...
what's the go with the thermostat???
keep me posted
|
|
|
Location:
Taree, 4h nth of syd
Registered:
May 2002
|
|
Re: 4AGZE oversized pulley kit
|
Thu, 13 June 2002 03:05
|
|
gremlin,
u need to run the toyota genuine thrmostat as the 14psi pulley kit overspeeds the waterpump (normal) and it forces the thrmostat open and keeps the engine 2 cool, as the gze engine needs to run abit over halfway or it runs on the cold circuit and runs alittle rich.
|
|
|
Location:
Maroubra
Registered:
June 2002
|
|
Re: 4AGZE oversized pulley kit
|
Thu, 13 June 2002 04:15
|
|
Darola,
I have a 4A-GZE in an AE-71 (RWD) with a front mounted GT4 intercooler... would you recommend upgrading the water pump aswell to help handle the extra temp coming from the larger pulley kit???
I really don't want to have to worry about the engine overheating... or not getting enough oxygen... 'cause a mate of mine MELTED the number 3 piston in his car.
|
|
|
Location:
Montrose, VIC
Registered:
May 2002
|
|
Re: 4AGZE oversized pulley kit
|
Thu, 13 June 2002 10:29
|
|
I actually fitted one of the ones I'm trying to get today, to an ae101 levin GTZ. Once I started pulling it apart, I noticed this car already HAD an oversized pulley on it, presumably blitz or HKS or something, but it wasn't as big as the one I put on. I didn't have a properly made up idler pulley on hand, so I used a 3SG one that I ground down slightly on the lathe. All up, easy to fit and seems to make a noticeable difference - testing was hard due to bald tyres and rain, although lane changes were easy down with the right foot 
Hopefully I'll have a few of these soon!
|
|
|
Location:
Taree, 4h nth of syd
Registered:
May 2002
|
|
Re: 4AGZE oversized pulley kit
|
Thu, 13 June 2002 14:22
|
|
|
Gremlin, i can asure u it wont cause it to overheat, if anything the overspeeding causes it to run colder, thats why u need a toyota thrmostat as they r strong and can handle it and work proberly, u can put a new waterpump in but not necasery, also remember to do a water pump u have to take the superchager off to get to the 2 10mm nuts on the back of the waterpump
|
|
|
Location:
Melbourne
Registered:
May 2002
|
|
Re: 4AGZE oversized pulley kit
|
Sun, 08 September 2002 05:47
|
|
I know this thread is a bit old, but I was thinking this week (after I got slaughtered by a vtec Integra) to fit an oversized pulley to my ae93 SX GZE.
Anyway after reading about the thermostat i have a question. After doing my conversion in may I have realised that my car always seems to be cold. The only time the temp gets to half way is whenthe car is idling for a while, but as soon as I take off again it goes straight back down, and I mean down, all the way to the line!! Its as if the auto choke is always on. Is it possible that I already have an oversized pulley fitted, and if so, how do I tell??
|
|
|
Location:
Sydney
Registered:
May 2002
|
|
Re: 4AGZE oversized pulley kit
|
Sun, 08 September 2002 06:22
|
|
slaughted by a vtec integra??
I have a gze in my aw11 mr2 and i just beat a new type r..
so i should chomp a vtec integra quite easily.
|
|
|
Location:
Melbourne
Registered:
May 2002
|
|
Re: 4AGZE oversized pulley kit
|
Sun, 08 September 2002 13:39
|
|
Well my car isn't running right at the moment, so i know that has something to do with it, but i still wanna leave him to see my brake lights as distant lights.
my car had been idling for 5 minutes or so before the drag so the engine and cooler were hot (top mount), and for some reason it stalled on me too and wouldn't start again for about 30 seconds. I gotta get it tuned properly. I have organised a rerun for a months time and want to make sure he learns his lesson next time
|
|
|
Location:
Colyton, NSW
Registered:
May 2002
|
|
|
Location:
Colyton, NSW
Registered:
May 2002
|
|
Re: 4AGZE oversized pulley kit
|
Sun, 08 September 2002 23:07
|
|
but then again...
i do weight 1260
so lady sx.. u have a seca???
have u weight urself?
cause thats what i way
|
|
|
Location:
Sydney
Registered:
May 2002
|
|
Re: 4AGZE oversized pulley kit
|
Mon, 09 September 2002 03:48
|
|
|
If you are going to the trouble of putting a bigger pully on the charger why not spend a little extra and get an eletric water pump? no need for a thermostat then.. I got an eletric water pump just recently.. it is one of those little black beasts that kinda looks like a turbo..(sorta) i had to buy the control unit seperate, all up i think it cost like 300 for the whole kit from repco altho that was trade, i think for anyone to just walk in and buy one i think it is around the 300 hundred mark or somthing like that. I havent installed it yet but i have been told that it is a noticeable power increase due to the fact that the engine isnt turning the water pump over... just my two cents worth.
|
|
|
Location:
Melbourne
Registered:
May 2002
|
|
Re: 4AGZE oversized pulley kit
|
Wed, 11 September 2002 12:48
|
|
| troyboy wrote on Mon, 09 September 2002 09:07 |
but then again...
i do weight 1260
so lady sx.. u have a seca???
have u weight urself?
cause thats what i way
|
I haven't weighed my car, but I have the SX hatchback, so standard I think they are about 1050kg.
I like the sound of the electric water pump, I might try them both then.
|
|
|
Location:
MELBOURNE
Registered:
May 2002
|
|
Re: 4AGZE oversized pulley kit
|
Thu, 12 September 2002 10:19
|
|
|
To slow the water pump down I made a spacer for the water pump pulley and run it from the front crank pulley instead of the one that runs the S/C. This also requires a little idler pulley to be made just behind the water pump pulley to direct the S/C belt in the right direction and a few other little mods. I dont trust electric water pumps as I have seen them fail.
|
|
|
Location:
Central Coast & Sydney
Registered:
September 2002
|
|
Re: 4AGZE oversized pulley kit
|
Thu, 12 September 2002 14:57
|
|
LadySX. It's possible that you do have the oversized pulley kit and it's over speeding the water pump. Do you know much of the engines history?
It's also possible that the thermostat is stuffed and stuck open. It would then heat up when there is no airflow over the radiator, but cool RIGHT down when moving.
One way to find out, is to heat it up by idling, then take off and get up to top gear. let the engine run as close to idle as possible in top gear. If it cools down, then bets are on that it's the thermostat..............
|
|
|
Location:
Sydney
Registered:
May 2002
|
|
Re: 4AGZE oversized pulley kit
|
Fri, 13 September 2002 01:57
|
|
Hmmm troy.. Well.. I run about 10pound.. And i beat a New Type R.. Only just tho.. but i did chomp him.. Then again.. i have LSD and RWD.. so out of the hole its all over..
|
|
|
Location:
Melbourne
Registered:
May 2002
|
|
Re: 4AGZE oversized pulley kit
|
Thu, 26 September 2002 16:27
|
|
|
well problem was diagnosed today. the thermostat is stuffed, the car is running really rich, and to top it off, its only running 3psi!!!! no idea why, still need to investigate that, but i have been sidetracked by the epa issue at hand. But 3psi!!! no wonder the vtech pulled away, my car is virtually n/a at the moment!!!!
|
|
|
Location:
Melbourne
Registered:
May 2002
|
|
Re: 4AGZE oversized pulley kit
|
Thu, 26 September 2002 18:55
|
|
cant wait to see VTML's face next time u 2 meet!
and only 3psi?!?!!? damn, cant wait to see ur car on some decent boost! 3psi to 10+psi... hmmm, expect a new experience babe
|
|
|
