Author | Topic |
Location: Brisbane
Registered: October 2002
|
WTB 18RGU Cam shims
|
Sun, 02 February 2003 13:19
|
|
i need some 18RGU shims to adjust cam to bucket clearance, dont know what size, is there anyone in brissy i can borrow soem off to work out the sizes i need then buy the correct sizes off u if u have them
reply or sms me on 040531728
|
|
|
Location: On your mum!
Registered: May 2002
|
Re: WTB 18RGU Cam shims
|
Tue, 04 February 2003 01:12
|
|
measure the clearance without shims. Then you will know what sizes you need.
|
|
|
Location: Brisbane
Registered: October 2002
|
Re: WTB 18RGU Cam shims
|
Wed, 05 February 2003 11:02
|
|
i was gonna do that but where the shims sit it's recessed, and where the buckets "hit" the shim its protruding
good in theory but wont work
DAMN
|
|
|
Registered: May 2002
|
Re: WTB 18RGU Cam shims
|
Wed, 05 February 2003 12:45
|
|
i've currently got 8 spare 2TG/3TG shims, they are or should be same as 18rg shims, if you desperately need a set to measure the required shim heights i could post them up, and you could post them back when your done. a lot of messing around but i know from experience how difficult it is when you don't have a set to measure. you could buy them off me but it would cost you $$$.
|
|
|