| Author | Topic |
|---|
I supported Toymods
Location:
Perth, Western Australia
Registered:
December 2002
|
|
|
Club President
I supported Toymods
Location:
Sydney
Registered:
May 2002
|
 Re: Bellhousing FS: R154 Supra 5Speed to M Series Motor
|
Sat, 15 February 2003 11:29
 
|
 |
Clint,
Mate I don't need it yet but there is a slim chance I might a little ways down the track PM me a price and I'll see if I can afford to have it sit on the shelf for a while. Once the TA22 is done (At last 12 months  ) I'm going to start on the MS65 !  Might try some 7MGTE turbo goodness ??
|
|
|
I supported Toymods
Location:
Perth, Western Australia
Registered:
December 2002
|
|
Re: Bellhousing FS: R154 Supra 5Speed to M Series Motor
|
Mon, 17 February 2003 08:43
|
|
Rod, You've got PMs! 
|
|
|
I supported Toymods
Location:
Perth, Western Australia
Registered:
December 2002
|
|
|
I supported Toymods
Location:
Perth, Western Australia
Registered:
December 2002
|
|
|
Location:
Sydney
Registered:
January 2003
|
|
Re: Bellhousing FS: R154 Supra 5Speed to M Series Motor & TRD Clutch to Suit
|
Mon, 24 March 2003 11:33
|
|
|
PM'D you.
|
|
|
Location:
Sydney
Registered:
July 2002
|
|
Re: Bellhousing FS: R154 Supra 5Speed to M Series Motor & TRD Clutch to Suit
|
Mon, 24 March 2003 11:46
|
|
How much for the TRD clutch ?
PM me if you want.
|
|
|
I supported Toymods
Location:
Perth, Western Australia
Registered:
December 2002
|
|
|
I supported Toymods
Location:
Perth, Western Australia
Registered:
December 2002
|
|
Re: Bellhousing FS: R154 Supra 5Speed to M Series Motor & TRD Clutch to Suit
|
Wed, 26 March 2003 15:34
|
|
|
ever been to an auction?, ..., going, ...
|
|
|
Location:
Perth
Registered:
September 2002
|
|
Re: Bellhousing FS: R154 Supra 5Speed to M Series Motor & TRD Clutch to Suit
|
Wed, 26 March 2003 18:12
|
|
tell usa bit about the clutch
will it bolt to a standard 5m flywheel?
is it pressure plate and clutch plate?
will it fit inside a w50 bell/h?
how many km's/high rpm dumps?
and most importantly, how much?
(i live in perth)
|
|
|
Location:
NSW
Registered:
August 2002
|
|
Re: Bellhousing FS: R154 Supra 5Speed to M Series Motor & TRD Clutch to Suit
|
Wed, 26 March 2003 23:48
|
|
|
Interested in the TRD Clutch if it will bolt to a 1JZ flywheel off a JZZ30 Soarer.
|
|
|
I supported Toymods
Location:
Perth, Western Australia
Registered:
December 2002
|
|
Re: Bellhousing FS: R154 Supra 5Speed to M Series Motor & TRD Clutch to Suit
|
Thu, 27 March 2003 02:26
|
|
Don't have a 5M or a 1J sitting around in my bunch of goodies, so don't know if the clutch will bolt up to their respective flywheels. Can tell all those interested it uses a 270mm Diameter bolt up circumference and is standard six bolt mounting.
Should fit into a W50 bellhousing as well as the outside diameter is only 5mm larger than a standard W50 clutch however the bolt up pattern does vary to the old W50 clutch I'm comparing it too.
I bought the clutch second hand, originally to put behind a 300hp 1GGTE, and all I have is the pressure plate and the friction plate. The pressure plate still shows the milling marks in the face, and the throw out fingers show virtually no wear, so I think the clutch has had very little use. You can still use the friction plate, however I would be leaning to replacing it as changing a clutch is not like changing sparkplugs!!! And no, I've never used it while I've owned it.
240mm single plate organic heavy duty clutch for those that ask but can't read previously! Cressida Supra, you have a PM!
Clint!
|
|
|
I supported Toymods
Location:
Perth, Western Australia
Registered:
December 2002
|
|
Re: Bellhousing FS: R154 Supra 5Speed to M Series Motor & TRD Clutch to Suit
|
Sun, 30 March 2003 02:50
|
|
|
..., going, ...
|
|
|
I supported Toymods
Location:
Perth, Western Australia
Registered:
December 2002
|
|
|
Location:
cronulla
Registered:
September 2002
|
|
Re: Bellhousing FS: R154 Supra 5Speed to M Series Motor & TRD Clutch (with photos) to Suit
|
Wed, 02 April 2003 13:09
|
|
|
ill take the bellhousing, ive sent you a pm, cheers.
|
|
|
I supported Toymods
Location:
Perth, Western Australia
Registered:
December 2002
|
|
Re: Bellhousing FS: R154 Supra 5Speed to M Series Motor & TRD Clutch (with photos) to Suit
|
Sun, 06 April 2003 14:11
|
|
|
"Gee this road is bumpy!"
|
|
|
Location:
Sydney
Registered:
July 2002
|
|
Re: Bellhousing FS: R154 Supra 5Speed to M Series Motor & TRD Clutch (with photos) to Suit
|
Thu, 10 April 2003 08:24
|
|
Ok, how much for the clutch ??
PM me if you want.
I fucked mine yesterday, and need to buy one this week, but the fact that it is second hand worries me a bit.
Also, can you prove it is TRD, and not just a standard toyota R154 clutch ???
|
|
|
I supported Toymods
Location:
Perth, Western Australia
Registered:
December 2002
|
|
Re: Bellhousing FS: R154 Supra 5Speed to M Series Motor & TRD Clutch (with photos) to Suit
|
Thu, 10 April 2003 13:49
|
|
Supraman,
Never heard back from you after I sent you the PM, sorry clutch is as good as gone. All TRD clutches that I've ever seen have been stamped, as has this one.
|
|
|
