| Forum: Miscellaneous |
|---|
| Topic: Brand New AE82 front left indicator |
|---|
Location:
Townsville, Queensland
Registered:
September 2002
|
|
Brand New AE82 front left indicator
|
Wed, 11 August 2004 12:13
|
 |
I brought this ages ago for my Toyota Tercel as they kind of fit but never used it.
Offers, postage included in the price.
|
|
|
| Topic: intercooler for sale |
|---|
Location:
Syndey
Registered:
December 2002
|
|
intercooler for sale
|
Thu, 12 August 2004 01:06
|
|
guys im selling my intercooler, i need money to pay a few debts 
will supply 3in silicon elbow (worth $95) and will put 2.5" or 3in inlet pipe onto the cooler either straight, 45deg or 90deg
core is 450 wide and 500 heigh,
polished tanks etc
made by pro spool and is a very very good cooler, on cold nights have seen below 0 air temps, always holds air temps very nice.
guantreed to flow 600+ rwhp
asking $850
pic
|
|
|
| Topic: crashed 86 |
|---|
Location:
Gold coast queensland
Registered:
August 2004
|
|
crashed 86
|
Thu, 12 August 2004 08:32
|
|
|
hey guys i crashed my hachi roku 2 weeks ago got the many spares and parts including a webber carby almost brand new, 2 bucket seats, racing steering wheel, 17" trilogy crome mags, full custom ae86 leather interior and more call me 0404321040 Chriso gold coast
|
|
|
| Topic: FS - R33 Stock Parts |
|---|
Location:
Melbourne
Registered:
July 2004
|
|
FS - R33 Stock Parts
|
Fri, 13 August 2004 06:09
|
|
R33 series 2 parts.
All parts off my car when it had 80,000 km on the clock.
Clutch - Held 185rwkw without slipping, good condition - $100
Flywheel - Good condition, replaced with chromemolly flywheel - $100
Exhaust cam gear - Good condition - $50
Am open to offers on all parts
|
|
|
| Topic: FS - R33 Stock Parts |
|---|
Location:
Melbourne
Registered:
July 2004
|
|
FS - R33 Stock Parts
|
Fri, 13 August 2004 06:10
|
|
R33 series 2 parts.
All parts off my car when it had 80,000 km on the clock.
Clutch - Held 185rwkw without slipping, good condition - $100
Flywheel - Good condition, replaced with chromemolly flywheel - $100
Exhaust cam gear - Good condition - $50
Am open to offers on all parts
|
|
|
| Topic: pioneer amp GM-X352 $150 |
|---|
Location:
sydney - paramatta
Registered:
March 2004
|
|
|
| Topic: EOI: Jap spec T50 bellhousing |
|---|
Location:
Ipswich
Registered:
May 2002
|
|
EOI: Jap spec T50 bellhousing
|
Fri, 13 August 2004 09:41
|
|
I've got one of these, not sure if I'm going to sell it yet - is anyone interested? If so, how much would you be willing to pay?
Located in Brisbane...
|
|
|
| Topic: HKS T51R SPL |
|---|
Registered:
April 2004
|
 HKS T51R SPL
|
Sat, 14 August 2004 03:31
|
|
HKS T51R SPL V-Band Ball Bearing turbocharger, less than 1000km-all testing only k's. This turbo is the "King Kong" of turbos and will support over 1000 horsepower! Comes with custom flange and stainless steel dump pipe. Polished compressor cover. Will need custom manifold,'gate and oil and water lines and plugs to suit your application. Very rare opportunity to get your hands on "The T51". If you don't know what this is you probably don't need it. Price is set at a very reasonable $4800. For serious enquiries please phone George on 0411 453 770.
Turbocharger is located in Melbourne.
|
|
|
| Topic: FS or SWAP: Nokia 6100 for Nokia 3200 |
|---|
Location:
Melbourne
Registered:
June 2002
|
|
FS or SWAP: Nokia 6100 for Nokia 3200
|
Sun, 15 August 2004 02:41
|
|
Hi guys,
I have a nokia 6100 with charger. Its Blue and works great. The front case has seen its days but replace the face and its as good as new.. Battery still lasts for 3-5days on standby and normal talk time. (I charge it twice a week)
Sell for $200 (firm) or straight swap for Nokia 3200.
It has heaps of games on it so u'll never get bored in the dunny if you want to escape your missus or boss for a while.
I also have a data cable with all the programs and you're more than welcome to use it upon purchase. Alternatively, i'll sell it to ya for $30 provided I can still keep it for another week to install games on the 3200.
If interested please email me on dnation@tpg.com.au
I will not answer pm or posts as i dont come online often.
Cheers
Dave
|
|
|
| Topic: 2TG & 2TG/3T Hybrid upgrade kit |
|---|
Location:
Adelaide
Registered:
September 2003
|
|
2TG & 2TG/3T Hybrid upgrade kit
|
Sun, 15 August 2004 08:26
|
|
This gear will allow any 2T or 3T to be upgraded to a 2TG or 2T/3TG Hybrid.
Included is
88260 Yamaha 2TG head
2TG Rocker cover
Timing Chains
All chain tensioners and guides
2TG Timing cover
Dummy Cam (replaces the single 2t/3t cam & add spocket for twin cam chain while still turning the distributor gears)
Any other bits needed I forgot to mention
Asking $350 for the lot.
Pics soon.
|
|
|
| Topic: RA28 bits for sale |
|---|
Location:
SA
Registered:
July 2004
|
|
RA28 bits for sale
|
Sun, 15 August 2004 12:55
|
|
I have a few things i no longer need so if u want em come get em..
xA23/28 front bumper in good nic, no dents at all but it has a small split in the centre $50
Ra28 rear tail light assemblys in very good nic $100 for the pair
Ra28 rear hatch in very good nic, no rust $300
Ra28/23 front parking light lenses in good condition $15 ea
Ra28 interior rear tail light covering thingo, few small cracks $30
Prefer sales in adelaide but i can freight smaller items.
CHeeerzz.
|
|
|
| Topic: Assorted 86 Parts |
|---|
Banned User
Location:
Melbourne
Registered:
January 2003
|
|
|
| Topic: g series open centre |
|---|
Location:
Brisbane
Registered:
June 2003
|
|
g series open centre
|
Mon, 16 August 2004 12:02
|
|
Just an open centre, no crownwheel and pinon
Make an offer to get it out of my shed!
|
|
|
| Topic: 18 inch wheels as new must sell |
|---|
Location:
MACKAY. QLD
Registered:
August 2002
|
|
18 inch wheels as new must sell
|
Mon, 16 August 2004 23:11
|
|
18 inch patend design wheels(atp inox)made in italy
was of st205 done no more than 2oooklms.cost near 800 each sell 375 each no tyres.pics via e mail
|
|
|
| Topic: BRAND NEW DOUBLE DIN PANASONIC HEADUNIT FS |
|---|
Location:
south east - melbourne
Registered:
March 2004
|
|
|
| Topic: RE: 4age for sale |
|---|
Location:
Katoomba
Registered:
August 2004
|
|
RE: 4age for sale
|
Tue, 17 August 2004 08:02
|
|
|
have you still got the engine for sale??? very interested
|
|
|
| Topic: FS: RAV4 94-97 OEM Front Bumper Indicators |
|---|
Location:
Doncaster, VIC
Registered:
June 2003
|
|
|
| Topic: wtb or where to buy a new rocker cover for my 86' st162 3sge? |
|---|
Location:
Adelaide
Registered:
June 2004
|
|
wtb or where to buy a new rocker cover for my 86' st162 3sge?
|
Tue, 17 August 2004 23:25
|
|
howdy just wondering if anyone knows where to get a new looking rocker cover for my celica. or even a new chrome one, either online or in adelaide.
thanks!
|
|
|
| Topic: AE101 GTZ Radiator inc thermo fan |
|---|
Registered:
June 2002
|
|
|
| Topic: Bosch 040 In-tank Pump |
|---|
Location:
brisbane
Registered:
May 2003
|
|
Bosch 040 In-tank Pump
|
Wed, 18 August 2004 03:21
|
|
Guys,
Have an almost new 040 motorsport in-tank fuel pump...
Has seen about 1000klms in my soarer, and comes with box etc...
Supplied enough fuel for 400+hp atw's...
$300 posted ONO
Brisbane
BAW@HVACQLD_dot_com
|
|
|
| Topic: FS: - 4AC + Alternator + A/C comp |
|---|
Location:
Adelaide
Registered:
July 2002
|
|
|
| Topic: Xbox games for sale - Driver 3 for XBox - As New |
|---|
"Cørønå ƒreåk"
Location:
Kellyville, Sydney
Registered:
May 2002
|
|
|
| Topic: GT30 Turbo - Brand new |
|---|
Location:
Sydney
Registered:
May 2002
|
|
GT30 Turbo - Brand new
|
Fri, 20 August 2004 09:05
|
|
Bought it for a project and true to form have had a mind change, It is brand new and has NEVER been used.
Specs from Ray Hall's site are as follows....
Model - GT30
Turbocharger part No - SB8005A
CHRA Part No - 700177-0011
Compressor Stage
Hsg. A/R - 0.70
Wheel Trim - 52
Model - TO4S
Wheel Dia - 2.17/3.00
Horse Power - 475
Comp Flow lbs - 50
Turbine Stage
Hsg. A/R - 0.63
Wheel Trim - 90
Wheel Dia - 2.11/2.22
The turbo was originally specd with a 0.82 exhaust but has been fitted with a 0.63
And before I get swamped with the usual "got pics"....
Asking $2000.
I'm not interested in negotiating price on here or by e-mail, if you want to haggle come and stand in front of me with a hand full of cash.
PM me for a phone number.
Darren.
|
|
|
| Topic: 18rgu |
|---|
Location:
Canberra
Registered:
March 2004
|
|
18rgu
|
Sat, 21 August 2004 00:53
|
|
G'day all, I'm getting another Celica  so I'm getting rid of my 18rgu, so if you are interested heres the description so there is no surprises! O.k block rehoned with new seals,chains,guides,welsh plugs,rings and bearings.
Here is the catch...you need to reseat one of the oil rings as one of the mongrels has slipped out of position  so it means pulling out the pistons to find which one and reset it and you need to adjust the cam wheels.
This is an easy project for someone who wants an rg and it comes with a good clutch and pressure plate 
I'm asking for $500 ono (sorry I don't own a camera to take pics )
|
|
|
| Topic: for sale 18in chrome zepter deep dish $1000 |
|---|
Location:
Penrith
Registered:
December 2003
|
|
for sale 18in chrome zepter deep dish $1000
|
Sat, 21 August 2004 03:25
|
|
as above zepter copy in very good condition with good rubber located in sydney
call 0415533807 urgent sale multistud 4 fit rolla or 114.3
|
|
|
| Topic: FS Lenso wheels 15x6.5", 4x114.3, 18p offset |
|---|
Location:
Brisbane
Registered:
August 2004
|
|
FS Lenso wheels 15x6.5", 4x114.3, 18p offset
|
Sat, 21 August 2004 07:16
|
|
Have a set of these brand new, still in their boxes. They are the five spoke Apex-5, see then here http://www.lensowheel.com/new_products.htm#
They were brought in to special order drilled to 4x114.3, not the multifit sizes shown on the site. But they are not what I want so out they go @$200 each, $800 for the set, Brisbane pick up buyer preferred. Nice and light, eg much lighter than the Performance superheavies and a similar price new, polished rim lip, very schmick 
|
|
|
| Topic: Twin 40mm Type 3 SOLEX + linkages etc. |
|---|
Location:
Sydney
Registered:
August 2004
|
|
Twin 40mm Type 3 SOLEX + linkages etc.
|
Sat, 21 August 2004 07:36
|
|
Im selling the below to make way for an EFI conversion.
I have a set of type 3 side draft 40mm solex for sale that have just been completely reconditioned/rebuilt using new rebuild kits. They have just come off my 180b rally car and have the following jets/venturi installed:
Jet, Air Correction 200
Jet, Idle 65
Jet, Main Air 135
Jet, Starter 130
Pump Nozzle 40
Venturi, Small 10
Venturi, Large 30
I also have misc incomplete jets for idle (55 & 52.5) and starter jets( 140 ).
The carbies have brand new 40mm ram tubes and Unifilter socks (seen one event, cleaned).
This will also come with linkages and rod-ends for L18 usage and a softmount kit suitable for big bore webber manifold, maybe used with toyota?
Does NOT come with the manifold as i still need it.
I can get the buyer more *NEW* jets and other parts if required for fitting to a toyota engine BUT they aren't cheap.
Some of the venturi retaining bolts aren't original.
The attached pics show the parts and condition of the parts in the carbies, also the gaskets that were replaced in the rebuild. The last pic is of the carbies as they were installed before removal and the linkage bits that will come with it.
Price for all as described above: $550 AUD.
Also, i have a Malpassi PK4 FPR(practically new): $85 AUD.
If you want to purchase the carbies without something listed above then PM me with the offer.
Dylan.
|
|
|
| Topic: 4AG water outlet on back of head for Levin etc NEW |
|---|
Location:
Redbank Plains,near Ipswi...
Registered:
May 2002
|
|
4AG water outlet on back of head for Levin etc NEW
|
Sat, 21 August 2004 07:49
|
|
|
brand new toyota part for rear drive cars with 4AG. takes the temp sesnors plus hose. Not the same as front drive cars. $75 plus post. no offers. thanks
|
|
|
| Topic: 18R single weber/solex sidedraft manifold |
|---|
Location:
Redbank Plains,near Ipswi...
Registered:
May 2002
|
|
18R single weber/solex sidedraft manifold
|
Sat, 21 August 2004 07:55
|
|
|
as it says. suit 40 to 48mm side-draft weber,solex or dellorto. make me a sensible offer. can send pic if required. fits locally sold 18R engines.
|
|
|
| Topic: EOI: 2.4ltr diesel hilux turbo kit, vic. |
|---|
Location:
Ballarat, Vic.
Registered:
February 2004
|
|
EOI: 2.4ltr diesel hilux turbo kit, vic.
|
Sun, 22 August 2004 15:51
|
|
i have in my posession an aftermarket turbo kit for a 2.4ltr diesel hilux.
has cast manifold [split pulse], garret/rotormaster TB03 turbine [internal wastegate], crossovers/intake pipes, dump pipe, turbine gaskets, v-bands and oil lines.
the turbine is a journal bearing type, has very little wear and has just been cleaned.
i will post pics if anyone here is interested.
i obtained this kit for the turbine, but as i dont need it anymore, i may as well sell the lot.
let me know.
M.
|
|
|
| Topic: For Sale: Turbo timer (Sydney) |
|---|
Registered:
June 2003
|
|
|
| Topic: swap momo for nardi anyone?? |
|---|
Location:
sunshine coast
Registered:
June 2004
|
|
swap momo for nardi anyone??
|
Mon, 23 August 2004 10:32
|
|
hey i got black momo wheel kinda old ok condition still with yellow horn button ohh its a full black 3 spoke wheel, i wanna swap for a nardi wheel if anyone is keen? maybe i will even give them cash 2 depends on condition!
email me and let me no
roryvanneste@hotmail.com
|
|
|
| Topic: 18r-gu SE Qld. |
|---|
Location:
Toowoomba
Registered:
May 2002
|
|
18r-gu SE Qld.
|
Tue, 24 August 2004 04:04
|
|
Selling the 18r-g. Excellent condition. No intake (maybe the twin carby manifold).
- Motor was rebuilt around 40-50,000km ago
- Head has a mild port and polish but is otherwise stock.
- Electronic distributor rebuilt about 30,000 ago
- 90 amp alternator (6 months old)
- Extractors and Luckey exhaust included if you want it.
- good W50 gearbox
- clutch
- engine mounts
- other bits and pieces
bolt on some intake and away you go.
Motor was running well with the EFI stuff on it, getting around 110 rwhp in an RA23.
looking for offers around $800
ph 0423 636 341
|
|
|
| Topic: fs: blitz turbo timer |
|---|
Location:
perth
Registered:
October 2003
|
|
fs: blitz turbo timer
|
Tue, 24 August 2004 07:20
|
|
hey guys, ive got a blitz turbo timer for sale
$100 negotiable
in Perth
ill put some pics up as soon as i can
|
|
|
| Topic: Kyosho SW-05R/ Nitro Race 1:10 Scale Car Kit |
|---|
Registered:
May 2002
|
|
Kyosho SW-05R/ Nitro Race 1:10 Scale Car Kit
|
Tue, 24 August 2004 15:21
|
|
Kyosho SW-05R/ Nitro Race 1:10 Scale Car Kit
Brand New Bought For $700 Selling - $400 (No Motor)
This is a 1/10 scale Kyosho Gas-Powered Four Wheel Drive Kyosho FW-05R On-Road Car Kit.
Kyosho FW05R rolling chassis with Aluminum shocks, GRP Foam Tires,15-Spoke White Wheels, 75cc Fuel Tank, 46T and 51T Nylon Main Gears,22T and 25T Clutch Bell Gears, Instructions, Decals
Futaba T2PHKA/ Race Trigger Remote Control Radio -$100
Call James 0415100400
$400
 |
Attachment: car121.JPG
(Size: 16.67KB, Downloaded 77 time(s)) |
[Updated on: Tue, 24 August 2004 15:22]
|
|
|
| Topic: 1G-GTE |
|---|
Location:
brisbane
Registered:
January 2004
|
|
1G-GTE
|
Wed, 25 August 2004 07:18
|
|
gen 3 1G-GTE
w58 5speed
loom & computer
this is a low km engine (hence price)
$1800 (negotiable)
prefer people to call then to reply or pm.
0409433964
can deliver SE QLD
|
|
|
| Topic: Datsun 1200 starter and alternator |
|---|
Location:
brisbane
Registered:
July 2004
|
 Datsun 1200 starter and alternator
|
Wed, 25 August 2004 07:27
|
|
whats up guys. i have a fully rebuilt starter motor and alternator to suit datsun 1200 ute with an A12 engine.
Very hard to get. pm for price.
thanks
|
|
|
| Topic: JZA70 Radiator FS |
|---|
Location:
Gold Coast
Registered:
June 2002
|
|
JZA70 Radiator FS
|
Wed, 25 August 2004 09:58
|
|
Got a JZA70 Radiator for sale... from a manual front cut
in pretty good condition
open to offers
Pete
|
|
|
| Topic: 7mgte on ebay, in brissy |
|---|
Registered:
September 2002
|
|
|
| Topic: FS: 16" wheels with new tyres |
|---|
Location:
Melbourne
Registered:
August 2002
|
|
|
| Topic: mobile phone sony ericsson t68i + IPOD! |
|---|
Location:
adelaide
Registered:
April 2003
|
|
mobile phone sony ericsson t68i + IPOD!
|
Thu, 26 August 2004 07:21
|
|
can i advertise my phone here? mods - let me know if you want me to take this down (dont want to cause any trouble)
i have just upgraded to a newer phone with a camera and all that stuff so this one is of no use to me
i have all the boxes and manuals and charger etc, the phone is in excellent condition but of course its not perfect as i do actually use it (has a couple of little scratches on the body but thats all)!
i dont know how much this is worth, make me an offer
also i have an ipod (20gb) that i got with my phone deal, retails for $499 i am not desparate to sell it but if you want to pay me $450 (inc postage) it is yours
|
|
|
| Topic: 2 x Stock 3SGE Gen 1 Flywheels $40 |
|---|
Location:
Epping, Sydney
Registered:
April 2003
|
|
2 x Stock 3SGE Gen 1 Flywheels $40
|
Thu, 26 August 2004 09:08
|
|
Up to you whether you lighten them or not 
But they are here, and I need to move them!
0412 184 470
|
|
|
| Topic: Turbo - Ball Bearing (R32) |
|---|
Registered:
February 2004
|
|
Turbo - Ball Bearing (R32)
|
Thu, 26 August 2004 11:55
|
|
Ball Bearing Turbo from R32 skyline, great condition no play in shaft.
Quick sale $450
mbonny@internode.on.net
|
|
|
| Topic: SOLD: K&N panel filter! |
|---|
Location:
Melb, Victoria
Registered:
April 2004
|
|
|
| Topic: FS -T50 box , 2tg headers |
|---|
Registered:
May 2002
|
|
|
| Topic: 16" 5x114.3 Rims for sale |
|---|
I supported Toymods
Location:
Adelaide
Registered:
July 2004
|
|
|
| Topic: FS: Original 95 Celica Stereo |
|---|
Location:
Sydney
Registered:
October 2002
|
|
FS: Original 95 Celica Stereo
|
Sat, 28 August 2004 00:39
|
|
Toyota Celica 1995 SX original stereo
Tape deck, 6inch fronts and 4inch rears
Excellent sound. All in excellent condition **$100**
|
|
|
| Topic: Toyota 4AGE ECU |
|---|
Location:
Adelaide
Registered:
January 2003
|
|
Toyota 4AGE ECU
|
Sat, 28 August 2004 04:30
|
|
|
I have a 4AGE ECU for sale, part no# 89661-20550. Yellow pinouts, 10p, 18p, 14p. $60 ono.
|
|
|
| Topic: ae 82 seca 4age/tranaxle |
|---|
Location:
sydney west
Registered:
April 2004
|
|
ae 82 seca 4age/tranaxle
|
Sun, 29 August 2004 09:36
|
|
ae 82 4age and tranaxle for sale the car has been in accident
writeoff engine still in car can start and test drive ,comes
complete with all accesories 163k on clock had new genuine
timing belt ,seals ,plugs etc done starts first time
no leaks clean.HAS NOT BEEN THRASHED WHILE IN MY POSSESION
OR PREVIOUS OWNER
$600
pm or ring 0410 512072 after 5:30 pm
|
|
|
| Topic: FS - R33 Stock Parts |
|---|
Location:
Melbourne
Registered:
July 2004
|
|
FS - R33 Stock Parts
|
Mon, 30 August 2004 01:24
|
|
Oz Racing 17" supertourismo rims 8.5 inch wide x 4
114.3 PCD 38 offset
Suit SKYLINE ,BA ,AU ,200SX,300ZX,3000GT,SOARER,SUPRA,other
Slight gutter scrapes on the front 2 wheels.
Other wheels in good condition
Comes with Nankang tyres
Front - 235x45 75% thread left
Rear - 255x40 70% thread left
These are a light weight rims as used throughout world motorsport.
$1300 ONO
In Melbourne but can courier interstate
|
|
|
| Topic: 17' VOLK rims for sale |
|---|
Registered:
August 2004
|
|
|
| Topic: Turbosmart BOV / Blitz turbo timer for sale |
|---|
Registered:
August 2004
|
|
|
| Topic: RA60 front bar - painted black with purple pearl |
|---|
Registered:
May 2002
|
|
RA60 front bar - painted black with purple pearl
|
Mon, 30 August 2004 03:43
|
|
Hi I have a RA60 front bar without the metal reinforcing and without the bottom plastic lip
It has been previouely sprayed but now I have a proper RA65 bar ..
All that needs to be done for respray is quick rub down as I have already spent many hours fixing the bar up
So the sprayed RA60 rubber bar (note without metal reinforcement and bottom lip) is for sale
$30 pick up from Ingleburn
|
|
|
| Topic: f/s turbo and manifold setup for 4age rwd |
|---|
Location:
Taree, 4h nth of syd
Registered:
May 2002
|
|
f/s turbo and manifold setup for 4age rwd
|
Mon, 30 August 2004 07:14
|
|
hey there all, found this on another site in newzealand
its a turbo and manifold setup for a rwd 4age
thought somebody here might like to have a look
go to--> http://forums.toyspeed.org.nz/viewtopic.php?t=2095 3
Eddie
(Darola)
|
|
|
| Topic: FS: B&M Boost Gauge |
|---|
Location:
Adelaide
Registered:
January 2004
|
|
|
| Topic: Group buy: GME TX610 handheld radios |
|---|
I supported Toymods
Banned User
Location:
Brisbane
Registered:
May 2002
|
|
Group buy: GME TX610 handheld radios
|
Mon, 30 August 2004 11:45
|
|
I'll be doing an order for some of these this week if anyone is interested.
They will be about $110(max) and should be a tad cheaper if I order a quantity at once.
Info can be found here: http://www.gme.net.au/land/tx610_main.html
If anyone is interested, I will need to know by Wednesday lunch time at the latest.
|
|
|
| Topic: under front sproiler for toyo sega |
|---|
Registered:
August 2004
|
|
under front sproiler for toyo sega
|
Mon, 30 August 2004 12:30
|
|
2 vgc front under sproilers unused 1998-99.
new 230.00 EA
my ones both 250.00
adrian
kallangur
|
|
|
| Topic: Bris: Supra Parts for sale... (mkiv) |
|---|
Location:
Brisbane, Mango Hill
Registered:
November 2003
|
|
|
| Topic: EOI: 4age 96 KW JDM cams |
|---|
I Supported Toymods
Location:
south Melbourne/KL
Registered:
June 2004
|
|
EOI: 4age 96 KW JDM cams
|
Tue, 31 August 2004 16:40
|
|
|
hi, im considering getting after market cams for my car so my current cams will be up for sale. Its a japanese model 4age cams, 240 degrees and done only 90K. Any offers?
|
|
|
| Topic: Toyota fibreglass radio antenna |
|---|
Registered:
July 2004
|
|
|
BRAND NEW DOUBLE DIN PANASONIC HEADUNIT FS
