Toymods Car Club
www.toymods.org.au
F.A.Q. F.A.Q.    Register Register    Login Login    Home Home
Members Members    Search Search
Today's Posts (OFF) | Unanswered Posts (ON)


Forum: Miscellaneous
 Topic: 2.5" exhuast system manifold back for ma61 supra.
ROBBO_ma61
Forums Junkie


Location:
Brisbane
Registered:
December 2002
2.5" exhuast system manifold back for ma61 supra. Wed, 23 April 2003 02:30 Go to next message
Im advertising it again because i cant wait any longer to sell it. Its sitting on my garage floor taking room i need to work with. has 3" stainless dump pipe on end... $80 no offers.
  Send a private message to this user    
 Topic: FOR SALE 7MGTE INJECTORS
GAZZAke25
Regular


Registered:
May 2002
FOR SALE 7MGTE INJECTORS Thu, 24 April 2003 07:39 Go to previous messageGo to next message
For sale four 7MGTE injectors in as new condition
(still in boxes) $250- for the lot
In Canberra
gazza_dp@yahoo.com.au

Garreth
  Send a private message to this user    
 Topic: RA65 celica power steering pump.
BansheeBuzz
Regular


Location:
Gold Coast
Registered:
January 2003
RA65 celica power steering pump. Thu, 24 April 2003 18:29 Go to previous messageGo to next message
as it says a RA65 celica power steer pump. Still attached to motor.
  Send a private message to this user    
 Topic: Garage sale
LiL_MiC
Forums Junkie


Location:
Melb
Registered:
May 2002
Garage sale Fri, 25 April 2003 17:29 Go to previous messageGo to next message
Fixed Black racing seat for ae86. Been told is an East Bear imitation [good jap brand]. Pretty good condition. Looks a lot like the one I have attached but there is no writing on it and it isn't a Recaro.
Offers over $300
Not ono since I am thinking of putting it in my car anyways.
I had this for about 2 months

Whiteline fixed swaybars front and rear for ae86.
$300 ono
Used for about 2 months

Old washing machine .. no seriously Smile
$150 ono
Once in a while, it'll make this loud sorta rumbling which means u have to open the lid and move the clothes that r being washed around to even up the load distribution or something. Not sure what happens if u keep letting it rumble for long. Otherwise it works well. Dad had to just waste money on a "newer" looking washing machine than on my car Sad .

Stock Sprinter Springs
$50 ono

Stock Mirage seats? Has Martini racing on it tho.
$100 ono

Prices are ono to some extent only. No unreasonable offers please.

Attachment: poleposition.jpg
(Size: 10.53KB, Downloaded 57 time(s))

  Send a private message to this user    
 Topic: W50 Steel case bearing kit
tanman
Forums Junkie


Location:
Newcastle
Registered:
May 2002
W50 Steel case bearing kit Sat, 26 April 2003 06:26 Go to previous messageGo to next message
I have a complete new bearing kit to suit a W50 steel case 5 speed. It came with a car I bought some time ago and I was told it cost $300

$150 ono
  Send a private message to this user    
 Topic: 18RG twin carby manifold
tanman
Forums Junkie


Location:
Newcastle
Registered:
May 2002
18RG twin carby manifold Sat, 26 April 2003 06:29 Go to previous messageGo to next message
I think it a factory part. Would be good for comverting a 18RGEU to carbies or for a custom twin throttle bdy setup. Excellent condition

$50
  Send a private message to this user    
 Topic: WTB: ke55 parts
quintang
Regular


Location:
Camden
Registered:
December 2002
 
WTB: ke55 parts Mon, 28 April 2003 08:30 Go to previous messageGo to next message
just picked up a ke55 4 door but its gonna need some work. at the moment i need a set of all 4 doors, boot, bonnet, and front quarters. any help would be greatly appreciated.

cheers

[Updated on: Mon, 28 April 2003 08:32]

  Send a private message to this user    
 Topic: RSM Blue Screen SOLD
KOFFEE-BLACK
Forums Junkie


Location:
Sydney
Registered:
March 2003
RSM Blue Screen SOLD Tue, 29 April 2003 00:55 Go to previous messageGo to next message
I have to get rid of the RSM I installed 3 weeks ago. My gf bought me a TV and now I need that DIN space. I have the Stand, RSM and G-SEnsor, my mechanic has the box and instructions, but its all in Japanese, you can print the PDF form the apexi site.

Well if anyones interested, PM me.

Heres a pic, not that detailed, will post better ones tonight if you wish.
http://groups.msn.com/KOFFEEBLACK/glo.msnw?action= ShowPhoto&PhotoID=94

Im in Sydney.

[Updated on: Tue, 29 April 2003 03:57]

  Send a private message to this user    
 Topic: FS AE86 repair manual
GSR18U
Regular


Location:
sydney
Registered:
May 2002
FS AE86 repair manual Tue, 29 April 2003 05:57 Go to previous messageGo to next message
u guys should know what it is
what are you's willing to pay for it?
highest bidder gets it.
im in sydney
http://www.members.optushome.com.au/takumi86/man2.JPG
http://www.members.optushome.com.au/takumi86/man.JPG
  Send a private message to this user    
 Topic: F/S M10 TURBO
celicaboy_2000
Forums Junkie


Location:
Lismore, NSW
Registered:
February 2003
F/S M10 TURBO Sun, 04 May 2003 10:32 Go to previous messageGo to next message
For Sale M10 Turbo $50
  Send a private message to this user    
 Topic: ECU Tuner use, it's a Toshiba 100 CT sub notebook
Heifongliu
Newcomer


Location:
Sydney, NSW
Registered:
May 2003
icon9.gif  ECU Tuner use, it's a Toshiba 100 CT sub notebook Mon, 05 May 2003 04:54 Go to previous messageGo to next message
Shocked
For sale TOshiba Libretto 100 CT
( Perfect example, bought and upgraded in JApan)
Still in excellent condition, like new. Even still got the original manual.
Suitable for Car Management Tuning ( ECU TUNING ), Work on the go, Wireless Networking Surprised
Size of VHS tape, Weight just 1.1 Kg Cool
Specs :
110CT model mainboard
Pentium MMX 233 MHz ( Genuine Speed )
64 MB of Ram ( upgraded, base is 32 )
20GB HDD ( originally only 2.1 GB )
7 Inch LCD screen
BIOS ver 8.10 Latest ( Installed in Japan a year ago )
LI-Ion HiCapacity ( Up to 3 to 4 Hours )
WIN98 SE and/or WIN XP Pro pre-installed on request ( Licences not provided, buyer provides for him/her-self)
2 PCMCIA slots
IR, PS2, VGA, Serial and LPT ports
CreditCard Xircom Ethernet and MOdem
External Toshiba FDD drive(original)
External CDROM Drive 24x ( Include with the box )
Targus Laptop Bag
Optical PS2 Mouse
Original Port Replicator ( For other connections )
Original AC Adaptor
Original HDD included as a spare
COst me $ 2000 a year ago Sad
Will sell for $1100, READY TO USE and PRICE IS NEGOTIABLE ;D

LUKAS
HEIFONGLIU@YAHOO.COM.AU
OR MP 0401 559 820 NSW ONLY
This is a genuine offer as there are lower spec item auctioned for about the same price. TRy ebay and use libretto as keyword for search. You'll see how expensive they are .. Wink

For more spec this is the official factory spec : ::)

Processor
Pentium (2.5 volt) with MMX technology, running at 166MHz
32KB level 1 cache

Memory
32MB EDO DRAM standard
Expandable to 64MB with user-installable EDO memory upgrade modules

Disk Drives
2.1 billion byte (=2.02GB) hard disk drive
1.44MB, 3.5" diskette drive, external PC Card (12mm slimline)

Display System
Brilliant 7.1" diagonal TFT active matrix panoramic color display
Video subsystem supports 16 million colors at 800 x 480 resolution
2MB Video EDO DRAM
PCI bus
External monitor color support: 16 million at 800 x 480, 800 x 600 and 640 x 480; 64K at 1024 x 768 (800 x 600 and 1024 x 768 = virtual display)
Simultaneous display on internal display and external monitor
128-bit NeoMagic NM2160 graphics controller
64-bit BitBLT advanced graphics acceleration

Standard Interfaces
132-pin Libretto Port Expander and Enhanced Port Replicator connector
Microphone, Headphone
DC-In jack

Expansion
Two stacked PC Card (PCMCIA) slots (supports two Type II cards or one Type III card; ZV and CardBus ready)
Libretto Port Expander (standard)
PS/2 keyboard or mouse*
High speed parallel/printer port (25-pin, ECP)*
High speed buffered 9-pin RS-232-C serial port*
Video*
Optional Libretto Enhanced Port Replicator
High speed parallel/printer port (25-pin, ECP)**
High speed buffered 9-pin RS-232-C serial port**
Video**
USB port**
PS/2 keyboard and PS/2 mouse**
Two additional PC Card (PCMCIA) slots (supports one Type III card and one Type II card)**

Keyboard
Full-function, 80-key sculptured keyboard (101-key keyboard compatible)
12 dedicated function keys
8 dedicated cursor control keys; arrow keys arranged in easy-to-use inverted "T" pattern
Supports optional external PS/2 style 104-key enhanced keyboard via Libretto Port Expander (standard)

Special Features
Wireless data transmission--fast infrared port (FIR=4Mbps IrDA compatible)
AccuPoint integrated pointing device

Pre-Installed Software
Microsoft Windows 95
Microsoft Internet Explorer
Puma IntelliSync
Utilities: Toshiba Power Saver

Documentation
Libretto 100CT User's Guide, Microsoft Windows 95 Manual
Electronic documentation
Power Management

Lightweight, removable, rechargeable Lithium Ion battery pack
Battery life 2.5-3.5 hours; recharge 6 hours off/12 hours on***
Low battery warning light/audible alarm
Auto resume

Security
Two level password protection
Keyboard lock/screen blanking feature
Cable lock slot*,**

Dimensions
8.3" W x 5.2" D x 1.4" H

Weight
2.35 lbs.

[Updated on: Thu, 08 May 2003 23:39]

  Send a private message to this user    
 Topic: 18rc extractors for sale in Canberra
trent_kershaw
Forums Junkie


Location:
Canberra
Registered:
September 2002
18rc extractors for sale in Canberra Tue, 06 May 2003 01:20 Go to previous messageGo to next message
as the topics says.....

make an offer
  Send a private message to this user    
 Topic: ebay finds: gt4 discs, 1G ic tec
Stefan
Forums Junkie


Location:
Hobart, Tas
Registered:
May 2002
ebay finds: gt4 discs, 1G ic tec Tue, 06 May 2003 23:58 Go to previous messageGo to next message
I have nothing to do with these and know nothing about them, was just browsing ebay and thought they might help someone

GT4 discs, near new, $80 (Brissy)
http://cgi.ebay.com.au/ws/eBayISAPI.dll?ViewItem&a mp;item=2414185664&category=34166

1G intercooler (Sydney)
http://cgi.ebay.com.au/ws/eBayISAPI.dll?ViewItem&a mp;item=2414185061&category=32624

BTW let each other know before toymodders start a bidding war, k? People do that on the OCC so they don't end up bidding against each other without knowing it and driving the prices up Very Happy
  Send a private message to this user    
 Topic: various celica bits cheap
mr spears
Regular


Location:
sydney blue mountains
Registered:
May 2002
various celica bits cheap Wed, 07 May 2003 14:52 Go to previous messageGo to next message
most of this stuff in not the best stuff around but hey, sum1 might want it. if you need any little mechanical bits say so now cos chances are i have 1 or 3 and will be throwing them out soon, like starter motot, wiper motor, brake booster etc etc

TA22
2t with auto
GT interior bits mostly complete but not good condition
a dash surround with a few cracks(enough to need a recover but still intact)
standard interior mostly complete
a few seats
GT indicators brand new (just thought id throw these in cos business is a little slow!)
ta23 bonnet, been shot once
  Send a private message to this user    
 Topic: RA40 Series I Bonnets FS
Grant
Forums Junkie


Location:
Newcastle, NSW, Australia
Registered:
May 2002
RA40 Series I Bonnets FS Wed, 07 May 2003 23:05 Go to previous messageGo to next message
2 RA40 Bonnets FS. One A-Grade (no rust and no repairs) $100; other B-Grade (minor rust that has been repaired) $50. Won't fit in postpack so yu'll have to drive to Newcastle if you want them.

Grant
0409 572904.
  Send a private message to this user    
 Topic: AE82 Gearbox - $80
Dodgy_Haro
Forums Junkie


Location:
Brisbane
Registered:
July 2002
AE82 Gearbox - $80 Thu, 08 May 2003 03:50 Go to previous messageGo to next message
I have here an AE82 gearbox which I have no use for - it's now sitting on my garage space. Not sure what its condition is (hence the $80 price) but it came from an import motor I got from JMS in Adelaide.

Am in Brisbane but can arrange postage elsewhere at the buyer's expense.

Here is a pic of the gearbox attached to the engine when I first received it. It has since been removed:

http://www.members.optushome.com.au/magneticrose/Eng5.JPG

Cheers!

[Updated on: Thu, 08 May 2003 03:51]

  Send a private message to this user    
 Topic: Supercharger (SDS)For Sale
T-Tuning Customs
Newcomer


Location:
Long Island
Registered:
February 2003
icon14.gif  Supercharger (SDS)For Sale Sat, 10 May 2003 00:13 Go to previous messageGo to next message
Location, Long Island NY, US

Supercharger Drive System (SDS) for the 5SFE for sale. This is a new unit and should fit the 3S with little or no modifications.

Recomended boost is 4psi, but can handle 9 for short periods of time.

The system will bolt on an additional 88-100+ horse power at the wheels, which translates to 100-135+ net horse power at the crank. Vortech V5Q G-Trim, in place on a 5SFE engine, producing 180WHP and 170lb/ft on an automatic transmission. Est 210whp on the 5spd version.

Dyno results:
WHP- 179.67@5500 (223.78 CRANK) up from 115.43
LB/ft- 165lb/ft@4700 (up from 93lb/ft)

Kit includes:
SDS
AFR
Bypass valve
Over Drive Crank boost pulley
"No weld" oil return fitting
270cc injectors
Vortech V5-G-Trim
255 Walboro fuel pump
All fuel fittings
Malpassi Fuel pressure regulator with oil filled gauge
All hardware for install
4ply silicone Blue hoses
All clamps
Oil return/feed lines
SDS belt
Idle pulley and brackets
Air filter
Fully illustrated instructions
1 year warranty
Price is $3700 USD

if I get enough response I willabout offer a group buy at a lower price.

email me with any questions or concerns at ttuningcustoms@lycos.com

Attachment: pic1.jpg
(Size: 66.01KB, Downloaded 49 time(s))

  Send a private message to this user    
 Topic: FS: Lanzar 1200D
SupraBOY
Regular


Location:
Yeppoon/Rockhampton
Registered:
September 2002
 
FS: Lanzar 1200D Sun, 11 May 2003 06:34 Go to previous messageGo to next message
Lanzar 1200D amp

amp specs

1200rms @ 1ohm
700 - 800rms @ 2ohms
450rms @ 4ohms

Apart from a few little scratches it's fine.

Asking $650 ono.

thanks
  Send a private message to this user    
 Topic: wtd early ta22 beaver panel
dcving
Regular


Location:
newcastle nsw
Registered:
May 2002
 
icon5.gif  wtd early ta22 beaver panel Sun, 11 May 2003 22:16 Go to previous messageGo to next message
im after an early model ta22 beaver panel, the one with the fuel filler in it, also with the flip down panel between the tail lights

if anyone got one can u please emailme or phone me on 0409431548
  Send a private message to this user    
 Topic: JZX81 Chaser Xmember and Sump
Grant
Forums Junkie


Location:
Newcastle, NSW, Australia
Registered:
May 2002
JZX81 Chaser Xmember and Sump Mon, 12 May 2003 22:17 Go to previous messageGo to next message
JZX81 cross member and front mounted sump. Suitable for conversion with JXZ90. $500 but will consider separating.


Grant
0409 572904
  Send a private message to this user    
 Topic: Help clear out my shed
hydro
Regular


Location:
Brisbane
Registered:
October 2002
Help clear out my shed Tue, 13 May 2003 07:20 Go to previous messageGo to next message
I realise most of this is not Toyota, but I need to get rid of it anyway:

Holden 179HP long motor (ex rally car), with 202 crank, ported head, etc (I only bought it to get the Webers off it) POA

Holden M20 4 speed gearbox with bellhousing and heavy duty clutch, (came with above motor) $50

2x Rover all alloy 3.5 litre V8's, stripped to suit rebuild, crack tested $200 each or $300 for the lot

The following parts I'll take what I can get:

Cast crank and factory conrods for 350 Chev

4 speed auto from a 5MGE Cressida, with auto computer and loom

Some 5MGE/7MGE bolt on parts (power steering pumps, A/C compressors, fan's, etc)

Located in North Brisbane
Pease email me at davesq297@bigpond.com
  Send a private message to this user    
 Topic: Toyota 14inch 4 stud rims
BansheeBuzz
Regular


Location:
Gold Coast
Registered:
January 2003
Toyota 14inch 4 stud rims Tue, 13 May 2003 08:40 Go to previous messageGo to next message
14 inch mags to suit most toyota 4 stud vehicles. Has worn 195 tyres on them(bout 25% left) Origanally of the corona in the pic.

$150 ono
  Send a private message to this user    
 Topic: FS:jza80 supras bonnet
MR PLOW
Forums Junkie


Location:
neverland
Registered:
September 2002
FS:jza80 supras bonnet Wed, 14 May 2003 10:35 Go to previous messageGo to next message
as above bonnet off jza80 supra.open to offers
  Send a private message to this user    
 Topic: 2 efi fuel pumps
Mr DOHC
Forums Junkie


Location:
Brisbane
Registered:
October 2002
 
2 efi fuel pumps Wed, 14 May 2003 11:47 Go to previous messageGo to next message
i have 2 perfectly good efi fuel pumps, came off 1.8l lancers
  Send a private message to this user    
 Topic: R154 5 speed conversion kit for 7M supra/soarer- withdrawn
soarer21
Forums Junkie


Toymods Forum Sponsor

Location:
Brisbane
Registered:
February 2003
R154 5 speed conversion kit for 7M supra/soarer- withdrawn Wed, 14 May 2003 13:39 Go to previous messageGo to next message
Decided it is too cruel to dismember factory manual car. will compliance, rego and sell instead

[Updated on: Thu, 15 May 2003 01:01]

  Send a private message to this user    
 Topic: 7MGTE engine complete with harness/ecu- withdrawn
soarer21
Forums Junkie


Toymods Forum Sponsor

Location:
Brisbane
Registered:
February 2003
7MGTE engine complete with harness/ecu- withdrawn Wed, 14 May 2003 13:44 Go to previous messageGo to next message
Decided it is too cruel to dismember factory manual car. will compliance, rego and sell instead

[Updated on: Thu, 15 May 2003 01:00]

  Send a private message to this user    
 Topic: MZ20/21 and possibly MA/JZA70 supra 4 pinion LSD withdrawn
soarer21
Forums Junkie


Toymods Forum Sponsor

Location:
Brisbane
Registered:
February 2003
MZ20/21 and possibly MA/JZA70 supra 4 pinion LSD withdrawn Wed, 14 May 2003 13:47 Go to previous messageGo to next message
Decided it is too cruel to dismember factory manual car. will compliance, rego and sell instead

[Updated on: Thu, 15 May 2003 00:59]

  Send a private message to this user    
 Topic: 3speed auto with O/D
BansheeBuzz
Regular


Location:
Gold Coast
Registered:
January 2003
3speed auto with O/D Wed, 14 May 2003 20:51 Go to previous messageGo to next message
As stated a 3 speed auto trans with overdrive from an 86 corona with a 22r. Vehicle had done 200000kms when was wrecked. Trans shifted fine.
  Send a private message to this user    
 Topic: FS: Celica 5 Speed
CeLiCa
Regular


Registered:
September 2002
FS: Celica 5 Speed Thu, 15 May 2003 02:52 Go to previous messageGo to next message
I just took this off my car (1990 Celica). I think its got around 100000km on it. My car was making clicking noices so i thought it was the diff inside the gearbox. The wheel bearing ended up being being stuffed to the point my wheel hit the guard so im not sure if there was anything ever wrong with the diff. I ended up replacing the box with an MR2 turbo one that can take the power of my engine and got a new wheel bearing. Most likely the gearbox is fine but im not 100%. The synchos are good as well.

Looking for $100

In melb
  Send a private message to this user    
 Topic: unichip for 98+ toyota
asinn
Regular


Registered:
August 2002
unichip for 98+ toyota Thu, 15 May 2003 12:46 Go to previous messageGo to next message
hi, i have an unichip for sale, its a type C unichip that fit most toyota that make after 1998

if anyone is interested pls give ma an email on asl217@optushome.com.au

sell for $400

Attachment: u.jpg
(Size: 45.06KB, Downloaded 20 time(s))

  Send a private message to this user    
 Topic: nitrous
asinn
Regular


Registered:
August 2002
nitrous Thu, 15 May 2003 13:00 Go to previous messageGo to next message
hi, i have a 80hp genuine wet nitrous NOS kit, comes with a 10lb bottle, bracket, autometer nos pressure gauge and everything u need to install in your car. the kit is only 1years old, i am goin to sell my car, so selling the nos kit too.

i am in sydney, will sell for $750 orginally cost $1500

anyone interestd pls email me at asl217@optushome.com.au
  Send a private message to this user    
 Topic: For sale misc items
Sprinta
Regular


Location:
Perth
Registered:
September 2002
For sale misc items Fri, 16 May 2003 13:08 Go to previous messageGo to next message
Hey dudes..
I have for sale a few things..

1. 4A series stock oil cooler sandwhich plate and a starion oil cooler.. no hoses - $60 (the cooler cost me $60 alone)
I cant use it because the turbo is in the way Sad

2. Stock near new 100kw pressure plate (pressure plate only)

3. 4AGZE alternator.. works perfect (im using a 4age one now)

4. Also stock ae86 springs but im guessing no one will want them Smile

Make an offer if your interested..

Also if anyone has a perfect clock surround they want to get rid of msg me Smile

No pics as i have no camera but they are what i say they are Smile

thanx dudes..
Im in perth but will cod.. email alemc@iinet.net.au

  Send a private message to this user    
 Topic: F/S ae86 carbon fibre bonnet
gingernuts
Regular


Location:
Adelaide
Registered:
December 2002
F/S ae86 carbon fibre bonnet Mon, 19 May 2003 04:17 Go to previous messageGo to next message
carbon fibre top skin bonded to the OEM bonnet webbing/frame work $500 firm, cheaper if you trade in your old bonnet.
pics available on the parts for sale forum.
  Send a private message to this user    
 Topic: 100kw oil cooler
Seca Boy
Occasional Poster


Registered:
December 2002
100kw oil cooler Tue, 20 May 2003 07:04 Go to previous messageGo to next message
This isn't being used anymore on my GZE so I might aswell sell it....
make an offer....

In Melbourne.
  Send a private message to this user    
 Topic: TA22 GT lenses
mr spears
Regular


Location:
sydney blue mountains
Registered:
May 2002
TA22 GT lenses Tue, 20 May 2003 16:41 Go to previous messageGo to next message
a qoute from the man himself

The lenses are to the best of my knowledge now out of stock world wide ! These things now are still available amoungst groups like us but dont wait to long to grab a set if you want them. And Besides a New set ex Toyota if they were still available would cost you almost $100 plus postage anyway so keep that in mind.

so i have 1 BRAND NEW pair left, most likely the last ever, $150
  Send a private message to this user    
 Topic: Electric Bike ---- Good Stuff
ae86-Levin
Regular


Location:
Brisbane
Registered:
January 2003
Electric Bike ---- Good Stuff Wed, 21 May 2003 01:25 Go to previous messageGo to next message
I have an electric bike for sale....Unused 3 month warranty...

Travels up to insane speeds of 25km/h(flat ground/faster down hill)...

May be able to drift...(LOL)

With front and rear suspension....

Battery lasts 50km rechargeable in the bike...

Battery removeable for normal bike use....

For $799.00

pm me for more info

Cheers..



Attachment: DCP_1288.JPG
(Size: 52.13KB, Downloaded 36 time(s))

  Send a private message to this user    
 Topic: FS: SX Corolla Seats
YB1-CAM
Occasional Poster


Location:
Canberra
Registered:
July 2002
FS: SX Corolla Seats Wed, 21 May 2003 07:41 Go to previous messageGo to next message
I've got a set of series 2 SX seats for sale. They will bolt straight into any AE92 Corolla.

There in fairly good condition, The foam is still very firm in both seats.

Reason i'm selling them; I bought them to fit them into an AE82, the rails don't bolt straight into an AE82 so i can't fit them...

asking price is $150 which is what i purchased them for, or nearest offer.

I'm in the ACT.

email me on rollaz7@hotmail.com if ya have any questions

http://www.netspeed.com.au/bucke/cars/SX_seats.jpg

http://www.netspeed.com.au/bucke/cars/SX_seats2.jpg
  Send a private message to this user    
 Topic: FS: ROH REFLEX Wheels 14X6, 4X114.3, 40p offset, suit fwd
bjkingwill
Regular


Location:
Vic
Registered:
January 2003
FS: ROH REFLEX Wheels 14X6, 4X114.3, 40p offset, suit fwd Wed, 21 May 2003 08:16 Go to previous messageGo to next message
Hey guys i have a set of Relfex mags for sale they are in very good condition. Two good olympic tyres 185/65R14.
$450

  Send a private message to this user    
 Topic: New 4 Door remote c/locking kit.
BansheeBuzz
Regular


Location:
Gold Coast
Registered:
January 2003
New 4 Door remote c/locking kit. Wed, 21 May 2003 10:06 Go to previous messageGo to next message
as stated new kit never fitted.

$100
  Send a private message to this user    
 Topic: Not working T50 sprinter box
TurboRA28
Forums Junkie


Location:
Terrigal
Registered:
May 2002
Not working T50 sprinter box Wed, 21 May 2003 21:26 Go to previous messageGo to next message
If anyone is interested I have a T50 box from a Sprinter. I think it needs new syncos. Got stuck in 4th one day and never came out. Might be good to rebuild.

$40.

Cheers
Joel
  Send a private message to this user    
 Topic: ae92 springs front and rear
thekemist
Regular


Location:
melbourne,australia
Registered:
August 2002
ae92 springs front and rear Thu, 22 May 2003 08:11 Go to previous messageGo to next message
Off an ae92 sx
offers
email laggyband1@hotmail.com as i dont come usually check this forum
  Send a private message to this user    
 Topic: 2T rebuilt
nilezy
Regular


Location:
Brisbane
Registered:
May 2002
 
2T rebuilt Fri, 23 May 2003 00:37 Go to previous messageGo to next message
Hey

I have an almost completely rebuilt 2T that i want to sell, as I'm not going to use it at all now.....

I have the head which has been completely rebuilt, new valve stems, new valve stem seals, reseated valves, but i don' have the rocker gear for the head, but everything else is there, has been acid dipped before the rebuild...........

A rebuilt block, has had one cylinder re-sleeved, and acid dipped, so looks pretty new, I have the rest of the engine, like the cam, crank, and some of the rocker gear, and anybody who want to buy ti can have the lot. I thought that if you get one of these free engines, pull it apart and use some of the bits that are not good on my engine, you can build a brand new engine!!!

PM, or email me turbo_drive@hotmail.com

for more details.

I also have the full gasket kit for the engine too to build it new.........

I'm looking around the 600 dollar mark, but prepared to go a fair bit lower, as it cost me just to get the head, the block rebuilt, and to get the full gasket kit about 700 bucks. I just want to get some money back!!

Cheers Nilezy
  Send a private message to this user    
 Topic: 4afe engine
tim123c
Regular


Location:
nsw
Registered:
May 2003
4afe engine Fri, 23 May 2003 03:22 Go to previous messageGo to next message
4afe engine from 93 model seca, Done 170,000km, good condition.
Auto gearbox thrown in.
sydney $300
  Send a private message to this user    
 Topic: RA40 Celica Dash for sale
Bluewire
Regular


Location:
Adelaide, South Oz
Registered:
May 2002
 
RA40 Celica Dash for sale Sat, 24 May 2003 06:59 Go to previous messageGo to next message
Hi guys....
Got an RA40 Celica Dash for sale brand new...$150.dollars in grey.
See it here...http://www.geocities.com/bluewiresean/Parts.html

Attachment: Save0406.jpg
(Size: 9.26KB, Downloaded 15 time(s))

  Send a private message to this user    
 Topic: 5x7 Inch Kenwood Speakers
BlackSupra
Forums Junkie


Registered:
August 2002
5x7 Inch Kenwood Speakers Sun, 25 May 2003 12:15 Go to previous messageGo to next message
Brand new Kenwood KFC-5708C speakers.

2 way 5x7 inches.

140w peak power (35watts rated)

185g magnet.

Awesome mid and high notes, sounded much nicer than the Alpines, not a massive bass speaker.

Still in the box, they are being sold because they won't fit my application! (even though its a 5x7 hole!)

$100.
  Send a private message to this user    
 Topic: APEXi SAFC II
SUPRA MAN
Forums Junkie


Location:
Sydney
Registered:
July 2002
APEXi SAFC II Sun, 25 May 2003 13:58 Go to previous messageGo to next message
APEXi SAFC II For Sale.
Still in the box, never used.
$565, includes registered/insured postage anywhere in australia.
See pic below.

Attachment: SAFC II.JPG
(Size: 42.82KB, Downloaded 70 time(s))

[Updated on: Sun, 25 May 2003 13:59]

  Send a private message to this user    
 Topic: 1ggte cooler for sale
juzzo84
Forums Junkie


Location:
Hornsby, N.S.W
Registered:
September 2002
icon4.gif  1ggte cooler for sale Mon, 26 May 2003 08:05 Go to previous messageGo to next message
as it says, stock nippon denso cooler of the 1ggte for sale.
$185
justin
0413461518
  Send a private message to this user    
 Topic: crome mags ta22 (PIC)
ta2272
Forums Junkie


Location:
qld
Registered:
May 2003
crome mags ta22 (PIC) Mon, 26 May 2003 12:06 Go to previous messageGo to next message
i have some 13 inch crome mags with 95% tred, suit the celica well cromed email me

J_A_S_O_N_M_A_R_S_H_A_L_L@hotmail.com
  Send a private message to this user    
 Topic: FS Sony headunit MD/CD remote
Ko Ko
Regular


Registered:
May 2003
FS Sony headunit MD/CD remote Thu, 29 May 2003 06:36 Go to previous messageGo to next message
ATRAC 4 (Chip: 2652AR). 10 second shock resistant memory. 8x oversampling, 1-bit memory. SSIR-EX AM/FM stereo tuner rotary encoder level control. Detachable front panel, remote supplied. Provides MD & CD changer control. CD Text support when used with CD Text equipped CD changer. D-Bass including Digital D-Bass for MDs. Radio station naming. List function, allows scrolling through radio presets or disc names without interupting current station or disc. Auto-Scroll for MD titles. Adjustable display contrast. Auto-dimmer.
Asking $600 but negotiable
Cheers
KO Ko
  Send a private message to this user    
 Topic: FORD stuff hehe: 351, holley 650, c4
EVOSTi
Forums Junkie


Location:
cambo
Registered:
May 2002
      no
FORD stuff hehe: 351, holley 650, c4 Thu, 29 May 2003 07:56 Go to previous messageGo to next message
i know this is a little out of place but ohwell someone may be interested. got these laying around at work, been there for a while so they are looking pretty sad.

the 351 is out of an XD, the heads are off but i have all the parts there. the welsh plugs are a little rusted, the motor is pretty grotty cause its been sitting for yonks but it still turns over quite easily by hand.

C4 transmission. also been sitting for yonks. not 100% sure on its condition but im TOLD it works. so that ones a bit of a gamble.

Holley 650. self explanatory.

prices: motor - $250 neg
C4 - $150 neg
carby - $180 neg
the lot $400

the stuff is at my work which is denham court servo so if you want to see it it must be during business hours or there abouts.
email evosti@nofunatall.com if interested.
  Send a private message to this user    
 Topic: (Canberra) Loom and Computer for 1GGTE + conversion bits
ChuckLandwehr
Forums Junkie


Location:
Canberra
Registered:
May 2002
(Canberra) Loom and Computer for 1GGTE + conversion bits Sat, 31 May 2003 09:46 Go to previous messageGo to next message
HI guys,
These bits are up for grabs at the listed prices.
A. 1GGTE Computer and Loom (from a GZ20 Soarer 1989 Auto)
$250.00

B. 1GGTE Auto Trans, and tailshaft modded suit RA23/28, and maybe RA40
$150.00

Replies by PM/email thanks guys.

regards Chuck


  Send a private message to this user    
 Topic: fs- 16" zepters with new tyres suit AE86 or similar
soarer21
Forums Junkie


Toymods Forum Sponsor

Location:
Brisbane
Registered:
February 2003
fs- 16" zepters with new tyres suit AE86 or similar Mon, 02 June 2003 02:02 Go to previous messageGo to next message
I have the following rims for sale. They are 2 piece Zepter rims with brand new 225-45-16 Falken ZE512 rear and brand new 205-50-16 Falken ZE512 front. Rims are 16x7 +23 front and 16x8 +23 rear in near perfect condition. One wheel only has a tiny mark on the rims edge otherwise they are perfect. Slight corrosion from weather on the centre nuts.

I want $1300 for the lot, no offers. Wheels are in brisbane

email soarer21@optusnet.com.au for further info

http://www.members.optusnet.com.au/wtf11/zepter02.JPG
http://www.members.optusnet.com.au/wtf11/zepter03.JPG
  Send a private message to this user    
 Topic: C50 Gearbox
EvilJack
Forums Junkie


I supported Toymods

Location:
Sutho/Hills NSW
Registered:
September 2002
 
C50 Gearbox Mon, 02 June 2003 04:21 Go to previous messageGo to next message
I have a perfect 5sp C50 box from a 4afc, worked fine before the conversion now siting at home.

$40 pickup.
  Send a private message to this user    
 Topic: 2002 Quintrex Coastrunner 530
kfleming
Occasional Poster


Location:
Sydney
Registered:
October 2002
 
2002 Quintrex Coastrunner 530 Mon, 02 June 2003 09:48 Go to previous messageGo to next message
Great runabout boat with under 25 hours on the clock. As new boat with large in floor kill tank, ski pole,cutting board and 2 extra rod holders.Always stored undercover with 2002 yamaha 115 hp outboard motor on special trailer.Great fishing or recreactional boat to suit new boat buyer . very well looked after and regretable sale due to move. Serious buyer enquiries and questions welcome. $34000

Attachment: quintrex1.jpg
(Size: 43.45KB, Downloaded 13 time(s))
Attachment: quintrex2.jpg
(Size: 44.46KB, Downloaded 10 time(s))

  Send a private message to this user    
 Topic: VIC Rego Plate - YDROOL
ZZT231
Forums Junkie


I Supported Toymods

Location:
melbourne.vic.au
Registered:
May 2002
VIC Rego Plate - YDROOL Mon, 02 June 2003 16:00 Go to previous messageGo to next message
Hey all,

A friend wants to get rid of a number plate. Open to any decent offers.

Cheers.
  Send a private message to this user    
 Topic: apexi-vtech controller
ind38t
Newcomer


Registered:
June 2003
apexi-vtech controller Mon, 02 June 2003 23:41 Go to previous messageGo to next message
hi ive got a brand new apexi vtech controller, dont know if this is the best forum to place it in, but yeah. I pre-ordered but im broke now so i need to sell it. going price is 500, i bought it for 693 dollars.

http://www.autospeed.com/shop/category_44/product_ 1286/browse.html

cheers,
nim
  Send a private message to this user    
 Topic: CoronaMk2 Parts
Myth
Occasional Poster


Location:
Albury
Registered:
February 2003
CoronaMk2 Parts Wed, 04 June 2003 07:25 Go to previous messageGo to next message
I have a Corons Mk2, body in excellent condition, motor in parts. Reconditioned head, new gaskets - still in packaging, needs timing gear, or would be good for parts.
make an offer....
  Send a private message to this user    
 Topic: manual ecu for 1jzgte supra
slylux
Regular


Location:
perth WA
Registered:
January 2003
    nup
manual ecu for 1jzgte supra Wed, 04 June 2003 12:11 Go to previous messageGo to next message
as title says .. i have a ecu from a manual jza70 1jzgte .. must sell as ive gone to after market .. $300ono
  Send a private message to this user    
 Topic: Stock GZE pulley
Seca Boy
Occasional Poster


Registered:
December 2002
Stock GZE pulley Thu, 05 June 2003 03:06 Go to previous messageGo to next message
As heading says, great condition. $100.
In melbourne but can ship anywhere.
  Send a private message to this user    
 Topic: Cheap Stuff
tkoco
Regular


Location:
Sydney
Registered:
January 2003
Cheap Stuff Fri, 06 June 2003 00:35 Go to previous message
I have some xenon projector fog lights they are off 180sx (I don't know if there a factory Nissan or after market Jap item but they work & have mounting brackets(they blok FMIC) the car is just off the boat so they could be like $60 or $300 bucks worth I have no idea, Huksjai brand??

Chequer plate alloy floor mats (front) (like the ones they sell at Carmate for $100,they just need a wash) pretty much fit any car except the Nissans with the dump pipe bluge, u just need to screw them down, they are pre-drilled.

And a set of car ramps from Auto One ($54) these are new the car has never been on them (2low)

but wait there is still more as a freebie a blue neon light thats plugs into the cig lighter, with wire ext to mount under car, cost $30.

Asking $100 for the lot or best offers, (if ppl want to offer more than $100 thats fine 2) (u pickem up from Hurstville area (Syd).
  Send a private message to this user    
Pages (220): [ «  <  2  3  4  5  6  7  8  9  10  11  12  13  14  15  16  17  >  »]


Current Time: Fri Mar 29 10:15:56 UTC 2024

Total time taken to generate the page: 0.18091988563538 seconds

Bandwidth utilization bar

.:: Contact :: Home ::.

Powered by: FUDforum 2.3.8
Copyright ©2001-2003 Advanced Internet Designs Inc.