| Forum: Tech & Conversions |
|---|
| Topic: Spark Plug Gaps |
|---|
I supported Toymods
Location:
Berowra-Sydney
Registered:
July 2002
|
|
Spark Plug Gaps
|
Sat, 07 September 2002 16:40
|
 |
Ok well from some good advice from Jamie "MRTA22" i bought myself some colder plugs for my engine and its doing a treat 
although the big question is how well and long they will last, i'll just have to wait and see but the next matter i want to dive into is about spark plug gaps.
What determines the size the gap should be?
is it better to have a bigger gap? to create a bigger spark?
and in doing so does that mean you need to install a coil with a greater power output?
anyone know the in's and out's of spark plug gaps or any sites which dive into the topic?
|
|
|
| Topic: AE86 J-spec Electronic (Digital) Dash help.. |
|---|
Location:
Canada
Registered:
September 2002
|
 AE86 J-spec Electronic (Digital) Dash help..
|
Sun, 08 September 2002 15:53
|
|
I have a J-Spec Electronic(Digital) Dashboard Speedometer.. Was wondering if anyone knows/has the pinouts/diagram or a website with details so i can install in in my Candain Spec AE86 GTS...
thx in advance..
|
|
|
| Topic: 88262 2TGEU HEAD ! |
|---|
Club President
I supported Toymods
Location:
Sydney
Registered:
May 2002
|
 88262 2TGEU HEAD !
|
Mon, 09 September 2002 00:14
|
|
The last series of 2TG's was the 88262 headed 2TGEU. This head is Unnumbered on the head itself but the cams are identified by the 88262 part number (????? - 88262).
This 2TG is a low compression High emissions control model and is generally regarded as the dog of all 2TG's  It has an offcentre head combustion chamber and is generally avoided.
Curiosity has go the better of me so If anyone can locate the head flow figures or a complete head i would be interested in seeing them or purchasing a head for the exercise. I'm just wondering how much better the other head is (%age headflow)
Thanks,
|
|
|
| Topic: A340E trannies and Q's |
|---|
Location:
North Brisbane
Registered:
May 2002
|
|
A340E trannies and Q's
|
Mon, 09 September 2002 05:05
|
|
ok, my auto box is dying, it's in a MK3 turbo supra, from what i have been told it is the same box that is behind 1JZ/2JZ/1U powered cars, is this true?
can i use these boxes? with a different bellhousing of course, anyone have one cheap?
i have also been told that the auto boxes are crap and can't even handle the standard power, and others have told me they are nearly as strong as a W58? what is the truth?
other wise i'm thinking i'll just get a W58, and finally go manual..... (i'm kinda hoping that will happen)
will a W58 handle a slightly more powerfull than stock 7M?
thanx,
c-ya,
[Updated on: Mon, 09 September 2002 05:06]
|
|
|
| Topic: M's Fussy Boost Controller |
|---|
Location:
_Sydney _
Registered:
May 2002
|
 M's Fussy Boost Controller
|
Tue, 10 September 2002 08:00
|
|
|
Does anyone have some info or have a link to some info abt the M's FBC? or used or have one etc. Thanks
|
|
|
| Topic: Converting RA65 drums to discs |
|---|
Location:
Hobart, Tas
Registered:
May 2002
|
|
Converting RA65 drums to discs
|
Wed, 11 September 2002 15:47
|
|
Okay, who's done it, and what did you need to do? I know the easiest way is to undo the rear crossmember from a Supra and wheel the whole in diff and all, but that isn't feasable when shipping interstate.
I have also been told that the caliper and drum hardware don't hang from universal mounts, so at the least I would need the semitrailing arms
Have those who have done it swapped the brake bias valve? Apparently the Celi has one line that gets divided at the rear crossmember, wheras the Supra one has two lines from the valve.
|
|
|
| Topic: alternative fender kits for Toyotas |
|---|
Location:
Finland
Registered:
June 2002
|
|
|
| Topic: sprinter gearboxs |
|---|
Banned member
Location:
Brisbane
Registered:
May 2002
|
|
sprinter gearboxs
|
Sun, 15 September 2002 22:37
|
|
gday
how many splines are on the input and output shafts of the t50 gearboxs from sprinters??...anyody know ?
i have a gearbox that is 22 splines input and 21 splines output, will this fit to a mates sprinter ?....its a ae86
thanks
wayne
|
|
|
| Topic: 4AFC into KE55 with 3-Spd Auto |
|---|
Location:
Melbourne
Registered:
May 2002
|
|
4AFC into KE55 with 3-Spd Auto
|
Mon, 16 September 2002 00:31
|
|
I was wondering if anyone has done this conversion, or even a 4AG, 4AC.
Which Auto Gearbox could be used?
Accellerator Cable?
The car currently has a 3K-C in there.
Cheers,
|
|
|
| Topic: 4age fuel pump for ae86 |
|---|
Location:
Sydney
Registered:
July 2002
|
|
4age fuel pump for ae86
|
Mon, 16 September 2002 13:39
|
|
I'm about to do a conversion and put a 4age in my sprinter but i need to find out what to do about the fuel system...
I'm planning on doing it soon and maybe a few months later turbocharge it!
What do u guys recommend?
|
|
|
| Topic: 1jz AC Compressor ? |
|---|
Location:
U.S.A
Registered:
July 2002
|
|
1jz AC Compressor ?
|
Tue, 17 September 2002 01:23
|
|
|
Because I'm not using my ac system and the ac compressor is there for extra wieght. Can the ac compressor be remove without having to buy a new shorter belt?
|
|
|
| Topic: FTO Seats? |
|---|
I supported Toymods
Location:
Perth
Registered:
May 2002
|
|
FTO Seats?
|
Wed, 18 September 2002 09:58
|
|
Does anyone know a good place for me to source some Mitsubishi FTO seats? Either those or Series 6+ RX7, or current model Celica.
I'm looking for some nicer seats for my Celica XX, in that sort of style, but I'm wanting something which is comfortable without all the adjustments.
Basically I want something that I find as nice to sit in as MA61 seats but dont weigh so much and look a bit more modern.
|
|
|
| Topic: Hoses n fittings |
|---|
Location:
Gold Coast
Registered:
September 2002
|
|
Hoses n fittings
|
Wed, 18 September 2002 10:16
|
|
Just wondering if anyone knows about transmission lines coming from a 1jz auto are h/p or l/p?
Will hose clamps be enough to hold on?
Also l/p power steering , i have to put a resovour in will these be ok with hose clamps.....
How far can u run flexible hose on the l/p from the rack to the res?
MOST IMPORTANTLY should i braze fittings on to the end of the existing metal hoses or can i just cut and flare them slightly to fit hose over the top????
How do u flare the metal tranny lines... 
Dont want my motor/tranny relying on $2.00 hose clamps is there a better solution without calling in the hose dude to make all fittings...
|
|
|
| Topic: Need advice on 1jzgte (jza90) into mx83 |
|---|
Location:
Sydney
Registered:
September 2002
|
|
|
| Topic: pictures - long inlet manifold, K-engine |
|---|
Location:
Finland
Registered:
June 2002
|
|
pictures - long inlet manifold, K-engine
|
Wed, 18 September 2002 21:53
|
|
Long inlet manifold is beneficial for low/mid rpm.
Actually even if you tune manifold to say.. 8000rpm, it will be pretty long if it'll be tuned to first reflected wave.
Despite clomsy appearance, this manifold will not restrict high rpm use of this engine.
-A.
|
|
|
| Topic: Offset of FWD Corolla steels rims? |
|---|
Location:
Adelaide
Registered:
May 2002
|
|
Offset of FWD Corolla steels rims?
|
Fri, 20 September 2002 01:13
|
|
Umm, like the tile said...
Whats the off set of standard AE82 FWD Corolla steel wheels?
I havent been able to find this info else where...
Craig.
|
|
|
| Topic: Offset for wheels on RWD Rolla |
|---|
Location:
SE. Melbourne
Registered:
August 2002
|
|
Offset for wheels on RWD Rolla
|
Fri, 20 September 2002 02:28
|
|
Hiya!
I have my stock as a rock AE71 and I want some spiff new rims on.. What is the offset, max size and other various stats that I would need to know?
Thanks very much in advance,
Shaun.
|
|
|
| Topic: Apexi F-manage |
|---|
Registered:
June 2002
|
|
Apexi F-manage
|
Fri, 20 September 2002 05:40
|
|
|
Has anyone ever heard of this before? I have a apexi f-manage in front of me for a 1j, trying to figure out exactly what it does. I tried to look it up on the web, it appears to be somewhat similar to a fcon, it may control timing also, I can't quite understand the translations of the japanese webpages-they don't translate very well. It is about the size of an HKS fcon, with a harness like an fcon. It also has a smaller box, about the size of a HKS vpc that says"Fmanage Q/N DC qn data converter" This piece has no knobs/buttons/display or anything-just a power light. I'm going to call Apexi tomorrow, just wondered if anyone had heard of these
|
|
|
| Topic: Shock position? |
|---|
I supported Toymods
Banned User
Location:
Brisbane
Registered:
May 2002
|
|
Shock position?
|
Fri, 20 September 2002 06:31
|
|
What do people think is the best position for shocks on a TA22?
I have a small problem with my new diff and brakes where the shock mounts will foul on the rotors! The guy that is doing the mods for me reckons that it would'nt hurt to move the mounts towards the center of the diff more, making the shocks sit directly up and down! He says this is reconmended for drag cars!
What do you "wise" people think about this subject?
|
|
|
| Topic: Thanks...to those involved thus far! |
|---|
Registered:
May 2002
|
 Thanks...to those involved thus far!
|
Sat, 21 September 2002 13:30
|
|
As most know, I am in the process of getting my 1UZ-powered Cressida going.
So, it is only appropriate that I give some credit to people who have helped thus far. (These names will also appear on the web-site when the project is completed).
Firstly, Erol who has helped me with this and my last project (4AG into KE70)
KDog - Who gave up his Saturday to come over and give me a start in wiring the 1UZ...Mate, your assistance means a lot, and wont be forgotten!!
The blokes at Carco Exhaust and Automotive in Belconnen... These crazy enthusiasts were happy to take on the conversion and did a bloody good job, without ripping me off. They know their stuff, which helps.
Overall, I've been very happy with the willingness of other enthusiasts to "pitch in" and help with things I've been unable (or not confident enough) to do.
Again, thanks!
|
|
|
| Topic: another AE86 conversion......... |
|---|
Registered:
May 2002
|
 another AE86 conversion.........
|
Sat, 21 September 2002 15:15
|
|
I have a couple of questions in regards to the AE86 conversion.
1) I want to know how to do the wirings for the 100KW red-top 4age into the sprinter. If there is a someone who have done it before, please pass me some info.
2) For the EFI setup, I'm thinking of running external surge tank, but I want to know what is most reliable and effective set-up ? For the fuel lines, do I need to change to the bigger lines ? HELP ME !!
Cheers
|
|
|
| Topic: 7MGTE Cressida...more info please |
|---|
Location:
Balranald
Registered:
May 2002
|
|
7MGTE Cressida...more info please
|
Sun, 22 September 2002 13:53
|
|
I have been talking about a conversion for the Cressida for a while now I know but this time it's for real. I've spoken to Thunderbird1 about 1JZ conversion into a MX73 like his but it seems WAY too hard for me. I am now thinking more along the lines of a 7mGTE conversion.
Can anyone help me out here and tell me "yes it's a good conversion" or "no don't bother". I would like to talk to people who have done this conversion into a MX73. I've heard it done in a MX83 but wondering if it's similar. I've seen the Jap Soarers of the 80's with them and they are similar bodies so my guess is it's simple.
I will be getting a mechanic around the Gold Coast/ Brisbane area to complete the conversion and wondering if anyone has any recomendations. Also costs. I know I can get the front cut for $2000 but I would also like some ballpark figures on conversion costs.
This conversion will be taking place quite soon if you guys think it's a goer so i'll keep you all posted.
Cheers...Steve
|
|
|
| Topic: Carby to EFI |
|---|
I supported Toymods
Location:
Sutho/Hills NSW
Registered:
September 2002
|
|
Carby to EFI
|
Mon, 23 September 2002 06:12
|
|
currently doing the 20 valve conversion i need to find an efi fuel pump as my previous setup was for carby. I was told its external on the ae92 for carby so i went to a wreckers to price an efi one up but they say its actually in the tank and have to buy the whole rear end setup. Have people been in the same situation and if so how have you fixed this?
all help apreciated, thanx
|
|
|
| Topic: Intercooler spec |
|---|
Toymods Club Treasurer
Location:
Sydney
Registered:
May 2002
|
|
Intercooler spec
|
Tue, 24 September 2002 04:49
|
|
I saw a second hand intercooler at a local importer, but I'm trying to find out what it's off.
It looks like a denso one similar to an MR2 but is bigger dimensions which are 300mm x 300mm x 65mm & the pipes both being at the same end.
Can anyone help?
|
|
|
| Topic: re: surge tank |
|---|
Location:
Perth
Registered:
August 2002
|
|
re: surge tank
|
Tue, 24 September 2002 12:49
|
|
hey ppl
i got a trueno ae85 and it was carby, and i have got a gze for it and id like to kno where the best place (efficiently, and leagaly) to put the surge tank, and pumps.
thanks ppl.
this is one of the many qu's that i need help with. hhah
az
|
|
|
| Topic: Engine Convert ST141 |
|---|
I Supported Toymods
Location:
melbourne.vic.au
Registered:
May 2002
|
|
Engine Convert ST141
|
Wed, 25 September 2002 06:48
|
|
My friend has a stock st141 with 3 new diffs and 2x 5sp gearboxes
what engine be installed on instead of a lame 2S motor?
Any good ideas?
NOTE- Budget is a main issue plus insurance....
Thanks
|
|
|
| Topic: what gearbox came in RT133 corona?? |
|---|
Location:
Canberra
Registered:
May 2002
|
|
what gearbox came in RT133 corona??
|
Thu, 26 September 2002 10:55
|
|
which model alloy 'supra' style 5 speed gearbox came in the RT133 Corona? W55, 57 or 58?
Thanks in advance...
|
|
|
| Topic: 4agze manual |
|---|
Location:
Perth
Registered:
August 2002
|
|
4agze manual
|
Fri, 27 September 2002 04:05
|
|
|
Any one know where to get a manual for 4agze engine or if you have electronic copy?
|
|
|
| Topic: 4K engine - how to tell piston types |
|---|
Location:
Gloucester NSW
Registered:
May 2002
|
|
4K engine - how to tell piston types
|
Fri, 27 September 2002 23:22
|
|
How do i know if my pistons are dished or flat?
I am running a 4K-C Hi-Cam.
I was wishing to put a 3K head on, but am under the belief that if I have dished pistons I can not do this.
Any ideas for EASY and CHEAP upgrades if I have the flat pistons??
Thanks
|
|
|
| Topic: GZE Supercharger |
|---|
Location:
Maroubra
Registered:
June 2002
|
|
GZE Supercharger
|
Sat, 28 September 2002 22:36
|
|
G'day,
What is the biggest supercharger you can fit on a RWD GZE??
and how much boost does it run standard?
Would it be worth fitting a newer, bigger supercharger of just get a bigger pulley kit for the standard one?
|
|
|
| Topic: Where to get 2tg parts? |
|---|
Registered:
September 2002
|
|
Where to get 2tg parts?
|
Sun, 29 September 2002 02:17
|
|
Hi all, I'm fairly new to 2Tg motors but have collected almost every thing to build a good 2TG, the parts I'm having trouble finding are the chain guides for the top half of the 2TG.
Anyone recommend a source for these with out me having to sell my kids to pay for them?
(Good used ones would be good aswell)
Chris in Tassie
|
|
|
| Topic: Where to get 2tg parts? |
|---|
Registered:
September 2002
|
|
Where to get 2tg parts?
|
Sun, 29 September 2002 02:17
|
|
Hi all, I'm fairly new to 2Tg motors but have collected almost every thing to build a good 2TG, the parts I'm having trouble finding are the chain guides for the top half of the 2TG.
Anyone recommend a source for these with out me having to sell my kids to pay for them?
(Good used ones would be good aswell)
Chris in Tassie
|
|
|
| Topic: 100Kw 4age with 86Kw Computer can it be done? |
|---|
Location:
Narellan
Registered:
September 2002
|
|
|
| Topic: ae82 front bar on ae86 sprinter |
|---|
Location:
Yowie Bay, Sydney
Registered:
June 2002
|
|
ae82 front bar on ae86 sprinter
|
Sun, 29 September 2002 07:37
|
|
they look heaps similar, will they fit with small mods?
anyone ever done this? the reason i ask is i can buy a new one really cheap 
|
|
|
| Topic: Fan belt tensioner |
|---|
Location:
CROMER, NSW
Registered:
May 2002
|
|
Fan belt tensioner
|
Sun, 29 September 2002 13:38
|
|
Should the tensioner have any play in it as mine does? I think this is my wierd noise comi ng from around there. 
|
|
|
| Topic: 4AGE Turbo Manifolds. |
|---|
Location:
Sydney
Registered:
July 2002
|
|
4AGE Turbo Manifolds.
|
Wed, 02 October 2002 01:47
|
|
Does anyone know if the HKS manifold made for the AW11 is the same as the one made for the AE86 ?
I've heard the AW11 one might foul on the strut tower
|
|
|
| Topic: Engine Suppliers (please Help) |
|---|
Registered:
May 2002
|
|
|
| Topic: 20V Extractors on a 16V 4AGE |
|---|
Location:
Sydney
Registered:
September 2002
|
|
20V Extractors on a 16V 4AGE
|
Wed, 02 October 2002 07:39
|
|
|
I have been offered the extractors from a 20V 4AGE, are they any better than the ones on my 16V 4AGE (100KW in a AE92 Seca SX)? Will they work well with a 2" exhaust, or am i better off going for aftermarket...
|
|
|
| Topic: driving lights |
|---|
I supported Toymods
Location:
Northern Beaches
Registered:
May 2002
|
|
driving lights
|
Wed, 02 October 2002 09:11
|
|
I got some driving lights for my b'day, they are smaller oval somes. So I wanna wackem on the sprinter.
Havn't had a real close look but where is the best place to mount them?
I notice there are two big bolts up front but looking at other people's pics they don't see to mount them onto those?
So where's best?
|
|
|
| Topic: 85/86 hilux wiring diagram |
|---|
Location:
geelong
Registered:
June 2002
|
|
85/86 hilux wiring diagram
|
Wed, 02 October 2002 10:26
|
|
|
I have been trying to find the tacho wire on a YN57 hilux 85/ 86 model so that i can hook it up to the computer is there anywhere on the net where i could find one....
|
|
|
| Topic: SV11 Fuel gauge... |
|---|
Location:
Adelaide, SA
Registered:
May 2002
|
 SV11 Fuel gauge...
|
Thu, 03 October 2002 02:28
|
|
I was filling up my car with petrol the other day, and when i started it up, the fuel gauge rose to about the 1/4 mark, then dropped all the way to nothing... I've driven around 200km so far since then, and only sometimes has it gone up a bit, then dropped again. I'm guessing that a wire is loose or something, but cant figure out where to look. Will the low fuel light work still? or will i have to completely guess how much fuel i have left?
Whats worse, is that i have work tonight... i guess I'll just have to hope i don't run out of fuel!
|
|
|
| Topic: Search for 7K |
|---|
Location:
ACT
Registered:
July 2002
|
|
Search for 7K
|
Thu, 03 October 2002 03:48
|
|
|
Does anyone know of any second hand 7K's (carby) available. I am getting pretty desperate. Doesn't matter where it is, I am willing to travel.
|
|
|
| Topic: Corolla Seats |
|---|
I supported Toymods
Location:
Sutho/Hills NSW
Registered:
September 2002
|
|
Corolla Seats
|
Thu, 03 October 2002 06:37
|
|
prolly been brought up before but im wondering with the seats in the AE92 SX came in another model corolla?
also if the seca rear seats fit straight into a hatch.
thanx
|
|
|
| Topic: ra40 + 1g-ge install tech article |
|---|
Location:
Lost in the K hole
Registered:
May 2002
|
|
|
| Topic: Wiring Diagrams for EP82 and EP91 Starlet |
|---|
Registered:
August 2002
|
|
Wiring Diagrams for EP82 and EP91 Starlet
|
Fri, 04 October 2002 14:11
|
|
Hey all,
Im just after the wiring diagram for the 4E-FTE (GT Turbo) EP82 Starlet and the australia delivered EP91 (Life) Starlet...
I am putting the 4E-FTE into my EP91 and think there will be some problems with the eleectrics..
Plus if anyone has had any experience with this conversion can they please email me or rpely to this post, thanks
lee@exposemedia.com.au
|
|
|
| Topic: port and polish |
|---|
Registered:
August 2002
|
|
port and polish
|
Sat, 05 October 2002 07:03
|
|
anyone know how much is port and polish cyclinda heads of a 2L 6cyclinda engine?
anyone know any good place in sydney?
|
|
|
| Topic: 20 valve exhaust |
|---|
I supported Toymods
Location:
Sutho/Hills NSW
Registered:
September 2002
|
|
20 valve exhaust
|
Sat, 05 October 2002 11:05
|
|
hey im just wondering to the poeple who have done the conversion what exhaust they opt for like a mandrel bend? and what size?
thanx
|
|
|
| Topic: W50 teardown tips please |
|---|
Location:
Perth
Registered:
September 2002
|
|
W50 teardown tips please
|
Sat, 05 October 2002 14:17
|
|
hey guys
i'm gonna pull down my w50 tomoro (still in car at the mo)
the thing whines in 1st 2nd 3rd and 5th
and there is a nice 'tinkle' noise, like 2 pieces of thin metal hitting each other. someone i know seems to think that this noise could be ball bearing from the front input bearing.
thoughts?
anyway, does anyone have any tips for pull it down and inspecting it? anything to look out for?
cheers
|
|
|
| Topic: EP91 Starlet Wiring Diagrams |
|---|
Registered:
August 2002
|
|
EP91 Starlet Wiring Diagrams
|
Sat, 05 October 2002 14:37
|
|
Hey all,
I am in desperate need of any of the wiring diagrams for the Australian delivered Toyota EP91 Starlet that has the 4E-FE engine...
I need the diagrams if possible by monday so that my conversion can still be done without many problems..
If anyone has any of the diagrams for the car or knows anyone that may, could you please help me out, my email adress is below...
Plus if anyone knows anyone that has put EP82 Turbo Starlet engine in a EP91 starlet or if they have done so themself could you please contact me, I just have some wiring questions to ask...
email: lee@exposemedia.com.au
Thanks everyone
|
|
|
| Topic: Engine options |
|---|
Location:
Central Coast, NSW
Registered:
October 2002
|
|
Engine options
|
Sun, 06 October 2002 03:48
|
|
With a bit of cash to spend I figure its time to do something with my engine (or get a sub for my Sony Xplod). So far I have a 2" exhaust from the newly replaced high flow cat converter back (the old cat was blocked) and a K&N panel air filter for my 4A-FC engine in my AE92 Corolla. Is there anything else I can do this engine for more horsies or is it worth just upgrading to the 4A-GE? Anyone know how much a recon 4A-GE will set me back? Thanks.
|
|
|
| Topic: oil pumps |
|---|
Location:
Brisbane, Queensland
Registered:
May 2002
|
|
oil pumps
|
Sun, 06 October 2002 10:13
|
|
Well my hybrid 3T-G engine is comming along well.
Just hit a snag, what oil pump should I go with?
I've got a 3T bottom end and a 2TG head.
I'm thinking I go with the 3T pump cause of it being in a larger cappacity engine, although the 2TG pump might be bigger to supply enough oil to the larger head.
any ideas???
|
|
|
| Topic: sway bar info |
|---|
Registered:
August 2002
|
|
sway bar info
|
Tue, 08 October 2002 02:28
|
|
Can anyone tell me the diametre of the front sway bar on the ma70 ro at least tell me where i can find the info on the net.
Thanx.
|
|
|
| Topic: Jumboz Springs - do they rate ?? |
|---|
Location:
Lost in the K hole
Registered:
May 2002
|
|
Jumboz Springs - do they rate ??
|
Tue, 08 October 2002 13:31
|
|
well, title says it really...
how good are they? quality? longevity? price?
cheers
ed
|
|
|
| Topic: 20V into offroad racecar |
|---|
Location:
Sydney
Registered:
August 2002
|
|
20V into offroad racecar
|
Wed, 09 October 2002 23:06
|
|
Im going to be dropping a 20V into an offroad racecar (currently a carbied L16 dato) in our off season and have a few questions.
background - M4 Motec (Pro) with data logging on the way, 1800 kombi gearbox with straight cut gears and super diff in the car, adaptor & modified flywheel, button clutch already secured.
can anyone recommend an importer in sydney to get the engine from?
can anyone recommend coilpacks to use?
what mods need to be done to the motor to switch from fwd to rwd?
the car will be running in heaps of dust - any suggestions on good air filters for dusty conditions?
is there a high volume oil pump available, if so what type?
Cheers.
|
|
|
| Topic: ta22 alignment specs |
|---|
Location:
KL
Registered:
August 2002
|
|
ta22 alignment specs
|
Thu, 10 October 2002 00:42
|
|
hey guys,
can anyone let me know the factory toe-in/out, castor and camber specs for the ta22
thanks
|
|
|
| Topic: KE55 Master Cylinder |
|---|
Registered:
October 2002
|
|
KE55 Master Cylinder
|
Fri, 11 October 2002 02:23
|
|
|
I've recently been through 4 KE55 PBR Dual circuit master cylinders...None of which had working rear brakes. Is this problem typical among KE55's? I've considered putting a kit through my original one, but its pretty expesive at $150. Are there any other models that have KE55 compatable master cylinders?
|
|
|
| Topic: GDV 32/36 Weber => Sprinter |
|---|
Location:
Face down in a ditch
Registered:
May 2002
|
|
GDV 32/36 Weber => Sprinter
|
Fri, 11 October 2002 08:11
|
|
My intention is replace the factory carb with the above Weber. I'm not doing it to increase horsepower, but simply because it fell into my hands for $40, which includes the adaptor plate.
Are there any pitfalls with just bolting it on (other than getting it tuned), and how should I expect the motor to respond?
On a side note..... as I understand it, K&N air filter are the best, but does the shape of the filter actually make any difference to performance?
|
|
|
| Topic: 5spd internals |
|---|
Location:
Perth
Registered:
September 2002
|
|
5spd internals
|
Fri, 11 October 2002 13:36
|
|
i have a steel case 5spd out of a crown i think (4M from memory)
and the gear on the lap shaft and the gear on the input shaft arent meshing properly and are creating a huge whine.
my q is, is the celica and corona 5spd the same internals (i 'think' mine is a w50 box) and is the 4spd the same as well?
the casings look identical (bar the 5th gear spot).
pics of 4 and 5 spd version here
http://home.oz-enet.com.au/peewee/yoda_boxes.html
any help?
|
|
|
| Topic: will a dato boss kit fit the celica |
|---|
Registered:
October 2002
|
|
will a dato boss kit fit the celica
|
Mon, 14 October 2002 08:52
|
|
|
will a dato boss kit fit the celica ?
|
|
|
| Topic: AE 92 air con |
|---|
I supported Toymods
Location:
Sutho/Hills NSW
Registered:
September 2002
|
|
AE 92 air con
|
Mon, 14 October 2002 09:16
|
|
just wondering what other air con setups fit in the ae92?
i have the 20v compressor which fits straight in but looking for the condensor and hoses as the ae101 dont fit.
just if some other setups fit then it broadens my chance of looking for the parts.
thanx.
|
|
|
