Forum: Parts Wanted |
---|
Topic: Worked cams wanted 2tg |
---|
Location: qld
Registered: May 2003
|
Worked cams wanted 2tg
|
Thu, 14 August 2003 07:51
|
|
im after some worked cams for my 2tg, if anyone has got send me a pm, thanks
Jason
|
|
|
Topic: [CBR] 4AGE 16 or 20v & aftermarket cams |
---|
Location: Adelaide
Registered: May 2003
|
|
|
Topic: Wanted W55/58 gearbox around Brisbane Goldcoast |
---|
Location: Central Coast, NSW
Registered: May 2002
|
Wanted W55/58 gearbox around Brisbane Goldcoast
|
Fri, 15 August 2003 06:00
|
|
I need a W58 or W55. they are off a 3TGTE, 1GGTE, or MA61. I think a MA70 also..
contact me on
Aaron
0401 442 365
aza@icc.zzn.com
|
|
|
Topic: superlite or Mesh rims for AE86 |
---|
Location: Sydney
Registered: June 2003
|
superlite or Mesh rims for AE86
|
Fri, 15 August 2003 07:08
|
|
with rims that will fit an AE 86. Preferably superlites or a mesh design. please PM or call me on 0414 26 33 66
|
|
|
Topic: wanted: any running T motor near canberra or sydney |
---|
Location: Canberra, ACT
Registered: September 2002
|
|
|
Topic: wtb, 45mm webbers + intake manifold to suit 2tg |
---|
Location: Hornsby, N.S.W
Registered: September 2002
|
wtb, 45mm webbers + intake manifold to suit 2tg
|
Fri, 15 August 2003 22:19
|
|
heya guys looking to buy a set of webbers (45mm) in very good condition with a manifold to suit a 2tg, if anyone has both or either could you please drop me a pm, thanks heaps
justin
|
|
|
Topic: 4AGE 100kw Intake Hose |
---|
I supported Toymods
Location: Sydney
Registered: May 2002
|
4AGE 100kw Intake Hose
|
Sat, 16 August 2003 15:48
|
|
This will be the third one I've gone through. they just keep cracking.
I'm willing to try other means, maybe an aluminium or stainless steel intake with a pod or some fabricated hosing.
Any ideas?
Thanks
|
|
|
Topic: ae86 suspension |
---|
Location: Adelaide
Registered: May 2003
|
ae86 suspension
|
Sun, 17 August 2003 12:41
|
|
coilovers to suit ae86, in sa
|
|
|
Topic: need set of 4 shockers |
---|
Location: sydney
Registered: July 2003
|
need set of 4 shockers
|
Sun, 17 August 2003 13:41
|
|
need shockers for all four springs on my ae92 rolla hatchback.
would prefer good shockers such as koni and monroe.
|
|
|
Topic: WTB: cup holder for a SW20 MR2 |
---|
Location: Melbourne
Registered: July 2003
|
|
|
Topic: looking for a rwd inlet manifold to suit 4agte conversion |
---|
Registered: March 2003
|
|
|
Topic: Saab 900 stock rims |
---|
Location: Hornsby, Sydney
Registered: October 2002
|
Saab 900 stock rims
|
Mon, 18 August 2003 07:34
|
|
any one got any and keen to sell. preferably at least 4 but will be keen for any amount.
must be 15 x 6. dont want the 15x5s
cheers roadrunner
|
|
|
Topic: WANTED- 4AC engine in brisbane |
---|
Toymods Forum Sponsor
Location: Brisbane
Registered: February 2003
|
WANTED- 4AC engine in brisbane
|
Tue, 19 August 2003 06:51
|
|
as title says, Im after a 4AC in reasonable condition. Dont want a dog as it has to go into a car. Anyone in brisbane got one they want to offload?
|
|
|
Topic: RA65 Towbar |
---|
Location: Lismore, NSW
Registered: February 2003
|
RA65 Towbar
|
Tue, 19 August 2003 10:21
|
|
Towbar for a RA65 Celica...
|
|
|
Topic: strut brace ae 86 |
---|
Location: Adelaide
Registered: May 2003
|
strut brace ae 86
|
Tue, 19 August 2003 12:52
|
|
after a strut brace of any brand to fit an oz spec ae 86 sprinter, adelaide preffered thanks
|
|
|
Topic: WTD: 2S bellhousing |
---|
Location: melb
Registered: August 2003
|
WTD: 2S bellhousing
|
Wed, 20 August 2003 02:28
|
|
I am after a 2S bellhousing in Melb.I would like to fit it to a w57 box. Also if anyone has a 2S starter motor to fit a 3SGE rwd conversion.
|
|
|
Topic: RWD Sprinter Gear Box |
---|
Registered: May 2002
|
RWD Sprinter Gear Box
|
Wed, 20 August 2003 04:33
|
|
Hi All,
i'm after a sprinter gear box in good condition,
Cheers
Will
|
|
|
Topic: Rear struts/springs for MA70/MZ21 |
---|
Location: cronulla
Registered: September 2002
|
Rear struts/springs for MA70/MZ21
|
Wed, 20 August 2003 12:38
|
|
gday, i need some reasonable supension for the back of my soarer if anyone has any reasonable aftermarket shocks/springs or coilovers id be happy to buy them asap.
cheers
|
|
|
Topic: WTD wheels to suit ae92 |
---|
Location: sydney
Registered: July 2003
|
WTD wheels to suit ae92
|
Wed, 20 August 2003 14:39
|
|
need wheels to suit ae92 tyres included.
not after cromies, want white rims.
16/6 -7inches
|
|
|
Topic: 1977 RA28 |
---|
Location: South Australia
Registered: August 2003
|
1977 RA28
|
Wed, 20 August 2003 14:59
|
|
Is there anyone in South Australia selling a 1977 RA28? Im not too fussed about the condition as i want something to work on but i need it to be registreable cause i dont have a car at the moment.
|
|
|
Topic: MR2 axles/CV's needed urgently |
---|
Location: Redbank Plains,near Ipswi...
Registered: May 2002
|
MR2 axles/CV's needed urgently
|
Thu, 21 August 2003 01:22
|
|
need at least 1 inner drivers side CV for a SW20 NA MR2. these CV's come off the axles readily, or I'll buy a whole axle. they are different to turbo models. Desperate to get race car running again., any clues would help. thanks T&C
|
|
|
Topic: 1JZGTE Oil Pump Pickup and.... |
---|
Location: Canberra
Registered: May 2002
|
1JZGTE Oil Pump Pickup and....
|
Thu, 21 August 2003 02:19
|
|
Hi guys, I pulled the sump of the 1J to modify it to clear the drag link, and found that some #%$#@# had taken the oil pump pickup and windage tray.
Parts required :
1JZGTE oil pump pickup to suit mid sump engine layout., and the Windage tray, any help in locating these would be greatly appreciated.
Many thank U's, Chuck.
|
|
|
Topic: WTB - ST162 Boss kit |
---|
Location: Castle Hill, Sydney
Registered: January 2003
|
WTB - ST162 Boss kit
|
Thu, 21 August 2003 02:27
|
|
as the topic says, need a boss kit for my ST162 celica.
|
|
|
Topic: ..::WaNtEd: mags 15"+ for adelaide::.. |
---|
Location: adel
Registered: September 2002
|
..::WaNtEd: mags 15"+ for adelaide::..
|
Thu, 21 August 2003 03:52
|
|
fanx all..just wanted if there are ne 15" or more mags for sale...for 4 stud 100mm
|
|
|
Topic: Foglights |
---|
Location: Sydney
Registered: July 2002
|
Foglights
|
Fri, 22 August 2003 00:33
|
|
I'd really appreciate it if any can help with this.
Looking for the passenger side foglight (outer) on a N14 Jap Spec SSS pulsar.
Pairs are ok as well.
|
|
|
Topic: 86 st162 boss kit |
---|
Location: brisbane
Registered: May 2003
|
86 st162 boss kit
|
Fri, 22 August 2003 01:04
|
|
i dont want to pay $90 like autobarn suggested for a simple boss kit, therefor if anyone close to the brisbane area has one, i'll take it, not payin any more than $45 for it.
|
|
|
Topic: Ma61 engine mounts (NEW) |
---|
Location: Brisbane
Registered: June 2003
|
|
|
Topic: tow bar |
---|
Location: wallerawang n.s.w.
Registered: August 2003
|
tow bar
|
Sat, 23 August 2003 11:31
|
|
hi guys i'm looking for a tow bar for a ae82 rolla
|
|
|
Topic: cressida dash face cover |
---|
Location: TAS
Registered: July 2003
|
cressida dash face cover
|
Sun, 24 August 2003 01:16
|
|
I am after the perspex cover only for a 1990 cressida.
I know that I have buckley's hope in hell, but really need one.
|
|
|
Topic: wtd rear sw20 supension struts assembly from 94 onwards |
---|
Location: Melb
Registered: May 2003
|
wtd rear sw20 supension struts assembly from 94 onwards
|
Mon, 25 August 2003 01:53
|
|
Hi
i need the stock rear suspension strut assembly for a 94 or onwards or if you have the front and rear shock struts i wil be interested too
have to be in good nic does not matter if the insert shockers are leaking
prefereable in melb
thanks
kev
|
|
|
Topic: 15 - 16inch rims |
---|
Location: sydney
Registered: July 2003
|
15 - 16inch rims
|
Mon, 25 August 2003 14:57
|
|
WTB 15 - 16inch rims to suit ae92 rolla.
preferrably with rubber
|
|
|
Topic: 2JZGTE BARE ENGINE |
---|
Location: Osama's hideout
Registered: February 2003
|
2JZGTE BARE ENGINE
|
Tue, 26 August 2003 04:48
|
|
WANTED
2JZGTE ENGINE, no turbos, dont really need intake manifold either.
looking to 1.5J conversion
thanks
shane
|
|
|
Topic: WTB: exhaust for MA70 N/A Supra |
---|
Location: sydney
Registered: June 2003
|
WTB: exhaust for MA70 N/A Supra
|
Tue, 26 August 2003 09:16
|
|
as title says im looking for a cat back exhaust about 2.5inches in diameter, preferably with mandrel bends and without a big muffler
in sydney
|
|
|
Topic: AE92 CSi hatch parts urgently wanted |
---|
Location: Caloundra, Qld
Registered: September 2002
|
AE92 CSi hatch parts urgently wanted
|
Tue, 26 August 2003 11:08
|
|
Does anyone have a AE92 update (91-94) hatch (not seca) tailgate for sale? I only need the rear plastic garnish and wiper motor but am willing to buy the complete hatch if necessary.
I can organise freight to Brisbane.
Thanks
|
|
|
Topic: late ke55 diff - adelaide |
---|
Location: Adelaide
Registered: August 2003
|
late ke55 diff - adelaide
|
Wed, 27 August 2003 03:30
|
|
has anyone got a late model ke55 drum-to-drum diff with 4.11:1 ratio that they can part with? its got to have the swaybar mounts and be in adelaide.
cheers
scott.
|
|
|
Topic: t25 with manifold |
---|
Location: perth-fremantle
Registered: August 2003
|
t25 with manifold
|
Wed, 27 August 2003 07:16
|
|
any one has those turbo off a s13 CA18DET with intercooler piping that i can buy. willing to pay cash for
|
|
|
Topic: Toyota Mr2 AW11 Steering rack wanted!! |
---|
Location: Adelaide
Registered: September 2002
|
Toyota Mr2 AW11 Steering rack wanted!!
|
Wed, 27 August 2003 08:52
|
|
Toyota Mr2 AW11 Steering rack wanted!!
AND HANDBRAKE CABLE I THINK.
EMAIL ME IF U HAVE ONE OR KNOW A WRECKER WITH THESE PARTS THANK U
whytry@lexicon.net
|
|
|
Topic: Intake Hose for '88 celica (3S-FE)!! |
---|
Registered: August 2003
|
Intake Hose for '88 celica (3S-FE)!!
|
Wed, 27 August 2003 14:49
|
|
I need this really badly as mine is almost ripped in half!
Pls contact me at sam_paech@hotmail.com
Cheers
Sam
|
|
|
Topic: AE86 speedo cable needed |
---|
Location: London - for a while anyw...
Registered: August 2003
|
AE86 speedo cable needed
|
Wed, 27 August 2003 23:05
|
|
I'm in need of the extension ('L' shaped section) for the speedo cable.
|
|
|
Topic: WTB Jap AE86 Front Brakes |
---|
Location: Brisbane
Registered: February 2003
|
WTB Jap AE86 Front Brakes
|
Thu, 28 August 2003 13:03
|
|
Want to buy AE86 Jap Spec front brakes... will pay for freight... must be in good condition.. ie. rebuildable..
|
|
|
Topic: 4age 100kw conrod needed |
---|
Location: brisbane
Registered: August 2003
|
4age 100kw conrod needed
|
Sat, 30 August 2003 12:05
|
|
im looking for a conrod to suit a 4age 100kw engine, can anyone help?
|
|
|
Topic: SA63 Starter |
---|
I supported Toymods Banned User
Location: Brisbane
Registered: May 2002
|
SA63 Starter
|
Sun, 31 August 2003 05:55
|
|
Anyone got one?
|
|
|
Topic: air cleaners |
---|
Location: qld
Registered: May 2003
|
air cleaners
|
Sun, 31 August 2003 07:23
|
|
hey im after some air cleaners and the housings to connnect them to my carbs. i have a 2tg with twin solexs. also i would be after some flutes which thoses sock filters fit. anyone with some they want to sell please get back to me.
Jason
or if any one knows how much defferent filters are new that would be good.
|
|
|
Topic: sv21 airbox - trade for pod filter setup(bolt to afm) or cash |
---|
Location: Gold Coast
Registered: January 2003
|
sv21 airbox - trade for pod filter setup(bolt to afm) or cash
|
Sun, 31 August 2003 07:51
|
|
after toyota camry sv21 airbox. Will pay cash or trade for my pod filter setup i have there now(i do not like the induction noise).
|
|
|
Topic: MA61 fuel sender |
---|
Location: NSW, East Coast
Registered: July 2003
|
|
|
Topic: WTB: 4AGE BITS |
---|
Location: Melbourne
Registered: July 2002
|
WTB: 4AGE BITS
|
Sun, 31 August 2003 23:13
|
|
Heyas,
I'm looking to buy the following parts for my 86:
1.some aftermarket cams for my 100kw redtop 4AGE. Around the 272 degree mark, or something that will run on standard ECU
2. Oil Catch tank for 4AGE to fit ae86
3. Rear Strut brace for AE86
Anyone have? I'm in melbourne. Cheers in advance.
Gaz
4AGE AE86 Trueno
|
|
|
Topic: T25 or T28 Turbo..... In Perth. |
---|
Location: Perth
Registered: August 2002
|
T25 or T28 Turbo..... In Perth.
|
Mon, 01 September 2003 02:43
|
|
Hey all....
I'm in Perth and looking for a T25 or T28 of either the S14 or
S15 200sx or the GTR turbos'.....
Thanks.
MIKE.
|
|
|
Topic: WtB: JZX90 wiring diagrams |
---|
Location: Perth
Registered: October 2002
|
WtB: JZX90 wiring diagrams
|
Mon, 01 September 2003 07:22
|
|
Will pay cash! Or maybe swap for Chaser parts?
- Justin
|
|
|
Topic: 6 inch ma70 electric fans |
---|
Location: Brisbane
Registered: June 2003
|
|
|
Topic: AE92 SX or GTi side skirts wanted in PERTH!!! |
---|
Location: W.A.
Registered: October 2002
|
AE92 SX or GTi side skirts wanted in PERTH!!!
|
Mon, 01 September 2003 15:53
|
|
as the title says
|
|
|
Topic: ST185/84 driver door |
---|
Location: Canberra
Registered: June 2003
|
ST185/84 driver door
|
Tue, 02 September 2003 03:03
|
|
Looking for a straight drivers side door
|
|
|
Topic: 4AGE/ZE Engine Book/Manual |
---|
Location: Sydney
Registered: January 2003
|
4AGE/ZE Engine Book/Manual
|
Tue, 02 September 2003 09:44
|
|
As per topic, or know where I can get one ?
Cheers !
|
|
|
Topic: WTB: 1jz or 2jz Manual frontcut |
---|
Location: Sydney
Registered: January 2003
|
WTB: 1jz or 2jz Manual frontcut
|
Wed, 03 September 2003 05:47
|
|
I'm after a 1jz-gte or 2jz-gte manual frontcut.
Prefer either a jza70(1jz) 5speed manual cut OR jza80(2jz) 6speed cut(if price is reasonable). If anyone knows anybody or any place selling please let me know.
Thanks.
Trza.
|
|
|
Topic: WTB: Intercooler pump |
---|
Registered: September 2002
|
WTB: Intercooler pump
|
Wed, 03 September 2003 09:28
|
|
I need a WTA intercooler pump for my GRP A intercooler. If you have one or any pump that runs on 12V let me know ASAP.
|
|
|
Topic: Parts for Sale AE86 or any parts |
---|
Registered: September 2003
|
Parts for Sale AE86 or any parts
|
Fri, 05 September 2003 02:59
|
|
Hi guys. Anyone want to get any car parts can source them through me. So email me at simkevin@hotmail.com
kevin
|
|
|
Topic: KE26 wagon parts wanted |
---|
Location: Adelaide
Registered: June 2003
|
KE26 wagon parts wanted
|
Fri, 05 September 2003 06:24
|
|
Just looking for some KE26 wagon parts. Im after the following
- L/H/R tail light assembly (not faded)
- Front and rear bumbers in good cond. (Can need rechroming)
- uncracked dash pad
Please contact me by emailing me at bplatten@adam.com.au
I live in adelaide but if the parts are good will pay for them in any state.
Thanks.
Ben Platten
|
|
|
Topic: DELETED |
---|
Location: Sydney
Registered: May 2003
|
|
|
Topic: 4AGZE injectors |
---|
Location: Melbourne
Registered: May 2002
|
4AGZE injectors
|
Fri, 05 September 2003 23:44
|
|
G'day im after some 4AGZE injectors prefrebly six of them, pm me if you have any for sale.
|
|
|
Topic: TA22 straight front bumper SYDNEY |
---|
Location: Sydney
Registered: September 2003
|
TA22 straight front bumper SYDNEY
|
Sat, 06 September 2003 02:20
|
|
as title says, need front bumper, in good condition in sydney
|
|
|
Topic: WTD: MR2 15inch standard Alloy wheel |
---|
Location: Melbourne
Registered: June 2002
|
WTD: MR2 15inch standard Alloy wheel
|
Sun, 07 September 2003 08:07
|
|
Hi Guys,
Im after a front 15x6 MR2 SW20 wheel. It must be from the later model bathurst/GT models though (ie. The shiny polished looking ones with a toyota logo on the cap).
Can anyone help me with this?
Cheers
Dave
dnation@tpg.com.au
|
|
|