Toymods Car Club
www.toymods.org.au
F.A.Q. F.A.Q.    Register Register    Login Login    Home Home
Members Members    Search Search
Today's Posts (OFF) | Unanswered Posts (ON)


Forum: Miscellaneous
 Topic: JZA71 cooler
mrshin
Forums Junkie


Location:
Montrose, VIC
Registered:
May 2002
 
JZA71 cooler Thu, 12 September 2002 15:19 Go to next message
JZA71 supra intercooler, in good order. Should have pics of it soon, worked well in my ae86 for a while.

$300
  Send a private message to this user    
 Topic: Maybe,, FS : Volks 3 Piece 14
kristian
Regular


Location:
NSW
Registered:
June 2002
 
Maybe,, FS : Volks 3 Piece 14 Fri, 13 September 2002 14:31 Go to previous messageGo to next message
How much these go for ??? ....

Attachment: volks.jpg
(Size: 42.48KB, Downloaded 69 time(s))

  Send a private message to this user    
 Topic: BATHURST MAGS
CelicaRA45
Forums Junkie


Location:
nth ringwood, Victoria
Registered:
August 2002
BATHURST MAGS Sat, 14 September 2002 07:28 Go to previous messageGo to next message
14 X7 BATHURST MAGS ARE IN NEW CONDITION 100 EACH
  Send a private message to this user    
 Topic: '97 and '98 (with VVT-i info) Toyota Supra MKIV repair manuals
humble
Regular


I supported Toymods

Location:
Brisbane, QLD
Registered:
May 2002
 
'97 and '98 (with VVT-i info) Toyota Supra MKIV repair manuals Mon, 16 September 2002 08:17 Go to previous messageGo to next message
Hi,

I have '97 and '98 Toyota Supra MKIV repair manuals (more than 80 PDF files each) on CD. Covers almost all repair information (including electricals) and additional theoretical information and background information on repair procedures etc. Quite comprehensive. '98 manual contains 2JZ-GTE VVT-i version information as well. 60 dollars each to anyone who's interested.

Cheers
  Send a private message to this user    
 Topic: Low K 4A
Dabbid
Forums Junkie


Location:
Yowie Bay, Sydney
Registered:
June 2002
 
Low K 4A Tue, 17 September 2002 07:59 Go to previous messageGo to next message
head removed... engine was running well pulled off for head gasket then decided on conversion
only done 80000 k's

make an offer...
  Send a private message to this user    
 Topic: TA22 Auto Tailshaft and engine Crossmember
online
Regular


Location:
(Hornsby)NSW
Registered:
July 2002
TA22 Auto Tailshaft and engine Crossmember Tue, 17 September 2002 22:57 Go to previous messageGo to next message
Selling these two bits I have in the garage..
They were out of an automatic ta22 which was converted to manual..
Im not sure how much there worth but I just need the room for other junk..
I also have in good condition the radiator for the Auto with the cooling/lines for the Auto gearbox..(You know what I mean)..
Any Offers???
  Send a private message to this user    
 Topic: GT ONE custom plates 4 sale
77RA28GT
Newcomer


Registered:
September 2002
icon6.gif  GT ONE custom plates 4 sale Wed, 18 September 2002 05:17 Go to previous messageGo to next message
you read it right!! GT ONE plates 4 sale
best offer $$$$ urgent sale restoring a Lb 2000 gt celica
leave message here-- or sms offer and details to 0415 206 453

  Send a private message to this user    
 Topic: 5M-GE auto (just the box!!)
Cressida Supra
Regular


Location:
Perth
Registered:
September 2002
 
5M-GE auto (just the box!!) Thu, 19 September 2002 19:08 Go to previous messageGo to next message
5m-ge auto box
A43DE

jap import 30,000km ago
still very smooth, still in car

looking for about $300ono

I'm in Perth

later
  Send a private message to this user    
 Topic: Mazda BITS ( Rotary), and 18r motor
moukey_lal
Occasional Poster


Location:
Sydney Area
Registered:
September 2002
icon14.gif  Mazda BITS ( Rotary), and 18r motor Fri, 20 September 2002 05:54 Go to previous messageGo to next message
I have parts for a rx4, and some other stuff.
I have new spring for and rx4, the thing that goes on the back of the car that is between the lights and used for the key hole
( Heaps hard to find), i have a locked diff, which has disk pads on it, i have a brass button clutch and some other clutch plates and accesories,
I also have a 13 monster port motor in pieces.

I also have an 18r motor under the house. It was put into my celica, but now i fixed up the other engine i had to fix up, and its been sitting under the house for about a year. It was such a good engine. No smoke, no rattles, nothing. Ran like a little old lady.

Prices are negotiable. Just make an offer and ill get back to you, or just pop me a msg if you have any questions. CHeers


  Send a private message to this user    
 Topic: Corona Mk2 diff
gianttomato
Forums Junkie


I supported Toymods

Location:
I renounced punctuation
Registered:
May 2002
 
Corona Mk2 diff Sat, 21 September 2002 01:13 Go to previous messageGo to next message
Complete drum to drum with handbrake cable. ~1410 mm across.
F312 diff. (3.909:1 open diff.)
$150.

Can deliver to Sydney in 2 weeks for small added fee.
  Send a private message to this user    
 Topic: AE86 GTS Taillights (pic)
Sam
Forums Junkie


Location:
Sydney, Australia
Registered:
May 2002
   
AE86 GTS Taillights (pic) Sun, 22 September 2002 03:26 Go to previous messageGo to next message
For Sale:

1 set US GTS Taillights to suit AE86, no cracks, not faded, good condition.

Click on small image for larger one
http://sprinter.qnix.com.au/images/GTStailights-thumb.jpg

Price $300 NEGOTIABLE.

I'm in Sydney, contact me at sam@toymods.org.au

[Updated on: Fri, 25 October 2002 22:44]

  Send a private message to this user    
 Topic: Cheap 18r-c Motor
moukey_lal
Occasional Poster


Location:
Sydney Area
Registered:
September 2002
Cheap 18r-c Motor Mon, 23 September 2002 01:41 Go to previous messageGo to next message
Im selling an 18r-c motor. I bought it from the wreckers for $350, and i only ended up using it for aobut a week. It runs like a dream. Nothing wrong with it. It doesnt have a carby thou. So it might be good for parts, or exchanging parts from other 18r-c engines. Doesnt blow any smoke. Its been sitting under my house for a while now. It also comes with 2 new timing chains i bought, tensioners and stuff. Also a spare head, but it has 1 inlet valve a bit bent. So all for parts, or sell whole. Relpy if have any questions
  Send a private message to this user    
 Topic: FS or Swap
EvilJack
Forums Junkie


I supported Toymods

Location:
Sutho/Hills NSW
Registered:
September 2002
 
FS or Swap Tue, 24 September 2002 07:38 Go to previous messageGo to next message
AE101 power steering open to offers or swap for a ae92 power steering.

  Send a private message to this user    
 Topic: FS : ta22 bits + weber carby
Classique71
Forums Junkie


Location:
Colac, Victoria
Registered:
May 2002
FS : ta22 bits + weber carby Tue, 24 September 2002 10:07 Go to previous messageGo to next message
Just bumping along the thread so it doesnt get lost

Got a few bits for sale

For starters :

Downdraft weber + manifold + adaptor plate for 2t or 3t single cam celicas - VGC - $ 80 dollars

2 x 2t engines - one semi stripped , 1 complete - both running when removed from cars ( will seperate head ) $100 for both or $50 each

ta22 bonnet - lip slightly rusty but otherwise straight and in good order - $ 60 dollars

Various ta22 guages ( sorry - no analogue GT guages or tacho )

set of 4 ORIGINAL ta22 hubcaps in excellent conditions ( 13 inch ones ) - 50 dollars

will take $250 for the lot or nearest offer

[Updated on: Tue, 24 September 2002 10:09]

  Send a private message to this user    
 Topic: SR20DET GReddy Intercooler $2500 (fitted)
mcboom
Regular


Location:
Victoria
Registered:
September 2002
 
SR20DET GReddy Intercooler $2500 (fitted) Thu, 26 September 2002 09:49 Go to previous messageGo to next message
Hi know this is a Nissan item, but it is brand new and ordered for a customer who can't pay for it now. Features all brackets and hoses. marc@sricar.com
  Send a private message to this user    
 Topic: CAR UHF Radio for sale + Extra Road Racer Recieve Frequencies
KitCar
Newcomer


Registered:
September 2002
icon1.gif  CAR UHF Radio for sale + Extra Road Racer Recieve Frequencies Fri, 27 September 2002 01:32 Go to previous messageGo to next message
A friend of mine is selling

Phillips PRM 8030 UHF CB Radio.
Has Sel call and all the nice features you would expect of a high end model radio. reprogramable upto a 100 channels.

Cost $1300new
Have the origional receipt and box. Sell for $500 ready to go.

In South Australia. I think he will be in Mel next week.

please post replies here

kitcar
  Send a private message to this user    
 Topic: Wanted Spark plug leads for V8 Soarer
mcboom
Regular


Location:
Victoria
Registered:
September 2002
 
Wanted Spark plug leads for V8 Soarer Sat, 28 September 2002 10:16 Go to previous messageGo to next message
Hi if anyone has a set of spark plug leads for a UZZ31 V8 Soarer please let me know. Cheers
  Send a private message to this user    
 Topic: ct12's for sale
punkdefender
Regular


Location:
Dandenong/VIC
Registered:
May 2002
 
ct12's for sale Mon, 30 September 2002 01:14 Go to previous messageGo to next message
Hi all,
Reconditioned and balanced twin ct12's for sale. This includes the exhaust manifold. If intrested send me an email.
$800 ono
  Send a private message to this user    
 Topic: Complete turbo conversion to suit a Marage
YOGI8U
Regular


Location:
up yours!
Registered:
May 2002
 
Complete turbo conversion to suit a Marage Mon, 30 September 2002 03:12 Go to previous messageGo to next message
This is for a mate!
Turbo conversion to suit a 95 bitsushiti Marage!
this includes GT25 roller bearing turbo, Massive Garrett intercooler and all the piping and oil lines!
asking $3,000 for $6,000 woth of parts!
and before the vultures circle, its not getting seperated!
Thanks heaps!
  Send a private message to this user    
 Topic: Triple Mikuni phh 40
kalium
Occasional Poster


Registered:
September 2002
Triple Mikuni phh 40 Mon, 30 September 2002 03:27 Go to previous messageGo to next message
No Linkages or Manifold. I dont have any pics, but they are in good condition and look good.

$500

BTW, Im in Brisbane area
  Send a private message to this user    
 Topic: Twin 2" SU's
kalium
Occasional Poster


Registered:
September 2002
Twin 2" SU's Mon, 30 September 2002 03:30 Go to previous messageGo to next message
$170 obo

  Send a private message to this user    
 Topic: 4AGZE (late) pistons $300
hinricp
Regular


Registered:
June 2002
4AGZE (late) pistons $300 Mon, 30 September 2002 03:44 Go to previous messageGo to next message
Nothing else to say

Kellyville NSW
hinricp@wahs.nsw.gov.au
0418239339

[Updated on: Mon, 30 September 2002 03:45]

  Send a private message to this user    
 Topic: 1995 bathurst 3sge for sale
CelicaRA45
Forums Junkie


Location:
nth ringwood, Victoria
Registered:
August 2002
1995 bathurst 3sge for sale Mon, 30 September 2002 07:33 Go to previous messageGo to next message
full import engine has alloy sump 1400 dollars no ecu ring me on 0412045467
  Send a private message to this user    
 Topic: Number Plates suit celica
Wild Supra
Occasional Poster


Location:
Perth
Registered:
September 2002
Number Plates suit celica Tue, 01 October 2002 09:37 Go to previous messageGo to next message
W.A. Number plates

YLDCELICA purple with white writing
$600 ono

Attachment: yldcelica plates.jpg
(Size: 18.84KB, Downloaded 17 time(s))

  Send a private message to this user    
 Topic: Number plate for all ex-18R cars
ra23celica1977
Regular


Location:
SYDNEY
Registered:
September 2002
Number plate for all ex-18R cars Tue, 01 October 2002 14:53 Go to previous messageGo to next message
The number plate for sale is NSW black and white plate.
WAS-18R. If anyones interested just email me. Make me an offer.
  Send a private message to this user    
 Topic: Set of AE92 SX rims
EvilJack
Forums Junkie


I supported Toymods

Location:
Sutho/Hills NSW
Registered:
September 2002
 
Set of AE92 SX rims Thu, 03 October 2002 06:30 Go to previous messageGo to next message
i know a couple of people wanted a set

can get a set

email me partyboi@thereisnogoon.com
  Send a private message to this user    
 Topic: SOARER mz20discs/calipers
grande91
Regular


Location:
Melbourne
Registered:
July 2002
SOARER mz20discs/calipers Thu, 03 October 2002 14:47 Go to previous messageGo to next message
MZ20 discs/calipers/pads just a bit of surface rust apart from that perfect working condition,...make an offer.

[Updated on: Thu, 03 October 2002 14:49]

  Send a private message to this user    
 Topic: SOARER mz20discs/calipers
grande91
Regular


Location:
Melbourne
Registered:
July 2002
SOARER mz20discs/calipers Thu, 03 October 2002 14:52 Go to previous messageGo to next message
MZ20 discs/calipers/pads just a bit of surface rust apart from that perfect working condition,...make an offer.
  Send a private message to this user    
 Topic: H1 POLARG EURO WHITE Bulbs for sale.
takumifujiwara086
Newcomer


Location:
Adelaide
Registered:
August 2002
H1 POLARG EURO WHITE Bulbs for sale. Fri, 04 October 2002 15:27 Go to previous messageGo to next message
The Euro Whites give off an intense purple-white light, really bright white with a dash of purple for the new look but not so much you will get hassled by the law. Draws 55W but puts out 100W. got them from Japan last time I was there. for sale for $50 dollars. If interested email me at speed_s13@hotmail.com


Cheers

Attachment: 01.gif
(Size: 35.21KB, Downloaded 19 time(s))
Attachment: hiakku.gif
(Size: 21.91KB, Downloaded 15 time(s))

  Send a private message to this user    
 Topic: Chevy Big Block Motor
Wild Supra
Occasional Poster


Location:
Perth
Registered:
September 2002
Chevy Big Block Motor Sat, 05 October 2002 06:58 Go to previous messageGo to next message
Chev 396 big block now 408ci
Engine is in pieces for inspection ready for asssembly.

Block has been bored out, deburred and painted. New cam bearings fitted. Cranshaft reground plus spare carank. Complete set of rods plus spares, 2 harmonic balancers, New pistons and rings to suit block, new mild lift camshaft, new hydraulic lifters, new timing chain and sprocket. 2 pairs of cylinder heads all with oval port intakes, Both with orignal rocker gear, 1 pair chrome morroso rocker covers, 1 pair alloy edellbrock polished rocker covers, 1 new alloy edellbrock performance rmp manifold, 1 stock cast iron manifold, holley 650 carby, 2 new pairs of extractors 1 pair stock manifolds, new high volume oil pump, recond water pump, 1 sump, plus pulleys and timing covers.

$3500 ono

[Updated on: Sat, 05 October 2002 06:59]

  Send a private message to this user    
 Topic: 4cyl Gen2 Cold Air Intakes
phat91camryle
Occasional Poster


Location:
San Diego, Ca
Registered:
October 2002
 
4cyl Gen2 Cold Air Intakes Mon, 07 October 2002 07:16 Go to previous messageGo to next message
Is anyone up for a group buy for cold air intakes for 4cyl Camrys...I need 4 more people to get in on it. The price is 160 dollars (U.S. Currency) let me know... e-mail me at obillab0ng@aol.com
thanks,
Matt
  Send a private message to this user    
 Topic: AE 82 Parts
GTI16V
Regular


Location:
CROMER, NSW
Registered:
May 2002
icon10.gif  AE 82 Parts Wed, 09 October 2002 13:44 Go to previous messageGo to next message
Evil or Very Mad
A mate of mine is selling some AE82 mags he has two sets one set with new bridgestone re92 on two rims and bridgestone g grids on the other two one set without tyres his number is 0403-899-949
contact him if interested
  Send a private message to this user    
 Topic: plug'n'play ECU for supra 2jzgte-Haltech E6K
MAZMAN
Occasional Poster


Location:
Sydney
Registered:
October 2002
plug'n'play ECU for supra 2jzgte-Haltech E6K Thu, 10 October 2002 14:11 Go to previous messageGo to next message
Hi,
would like to know if any1 out there is keen on a haltech e6k that is made to be a plug'n'play for the supra tt? 6speed.

you get the E6k(latest firmware)
software
3bar MAP
adapter to suite
manual
wiring diagram of all the connections
fuel pump relays
2step control
haltech boost control valve(so you can use electronic boost)
plate to bolt on the haltech ecu in the original position
486 laptop in carry bag
cable
so everything you need to run the supra.

what you do is,
take out the standard ecu,plug in this adapter(its called "field") to the original supra's loom and then plug the haltech ecu to this adapter.cant get much easier then that!
no cutting of looms and you use the original sensors that are on the supra.
there are a few things that you'll have to do ,but it only takes around an hour or so.
1.you'll have to make your fuel pump run constant 12V
2.place the MAP sensor in the engine bay.
3.run a wire from your IGN- to the ecu.
4.and run your turbos in TTC(true twin conversion),you can run them sequential but i havent configured them out.
5.O2 is not connected as i never wanted it(you can if you want to)

there is no modifications to do for the cam or crank sensors,coils ect...,runs everything as is

If some1 is to buy it,i can show you all these things and explane to you how to do it,ill even leave the ecu running for ya in the car until you buy it(so you can hear and see it running),and then ill take everything out infront of you and explane along the way.
so it will be a piece of cake for you to fit it.

there is way too much to write in here so ill just see if any1 is interested first.
I do have the original loom if some1 wants to run it on a different engine...but this is a one of a kind deal for the supra guys out there
Ill will give you also a starting map for you to use,but you'll have to tune it for your spec engine on a dyno/road

I am in Sydney
To get all this that i have you would be looking at paying $3K
the FIELD adapter alone cost me $600.
anyway,im looking at $2K for all this.
if interested please email me at: mazman808@hotmail.com
or PM me in here,or leave a reply and ill get back to ya within a day.
thanks

P.S. sorry for the long post




  Send a private message to this user    
 Topic: fs kg/mm
zjez10
Regular


Location:
sydney
Registered:
July 2002
fs kg/mm Fri, 11 October 2002 14:04 Go to previous messageGo to next message
pair of used rear kg/mm spring for sprinter...
spring rate=unknown
mm lower= very low but not sure how many mm
100ono

zitian@iprimus.com.au

[Updated on: Fri, 11 October 2002 14:05]

  Send a private message to this user    
 Topic: w58 gearbox out of an MA61
humble
Regular


I supported Toymods

Location:
Brisbane, QLD
Registered:
May 2002
 
w58 gearbox out of an MA61 Sat, 12 October 2002 12:54 Go to previous messageGo to next message
w58 out of an MA61 for sale 300.00. if anyone is interested mail, youcan_reachme@hotmail.com

Sold on 19/10/02 (box/clutch/pressure plate/flywheel/tail-shaft/bellhousing).

Thanks for the interest guys.

Cheers

[Updated on: Sat, 19 October 2002 13:08]

  Send a private message to this user    
 Topic: 18rgeu ecu and parts (18r + 18rg)
Wild Supra
Occasional Poster


Location:
Perth
Registered:
September 2002
18rgeu ecu and parts (18r + 18rg) Sat, 12 October 2002 13:20 Go to previous messageGo to next message
18rgeu ecu $250
air flow meter with air filter setup $100
18r head with valves $100
air con compressor $60
18rg head with valves,cams and springs needs strightening $150
complete diff with brakes suit ra40 $100

  Send a private message to this user    
 Topic: 1996 Starlet Engine and Gearbox
Lone
Occasional Poster


Registered:
August 2002
1996 Starlet Engine and Gearbox Sat, 12 October 2002 14:28 Go to previous messageGo to next message
I have a 1996 Australia Delivered Toyota EP91 Starlet Engine (4E-FE) and gearbox for sale. It has 127,000 genuine kms on it.

Im only asking $800 ONO for the lot, perfect for a replacement motor, great to buy as these starlets are just starting to become a bit run down now...

Call me on 0438981907 if your interested.

Lee

lee@exposemedia.com.au
  Send a private message to this user    
 Topic: Tv Tuner $65
SW20R
Forums Junkie


I supported Toymods

Location:
Sydney
Registered:
May 2002
icon4.gif  Tv Tuner $65 Sun, 13 October 2002 01:43 Go to previous messageGo to next message
Brooktree BT878 Chipset
Full Tv Frequency range for CATV/ VHF / UHF.
PCI BUS
FM Radio
Remote Control

Infra red thingo missing in my room somewhere.. and cd driver missing. Thats why im selling it for cheap Very Happy

The functions work brilliant, Esp the FM radio.. if your out of mp3s you can just tune into the local stuff.

Will burn drivers of the net.. and throw in the infra thing if i find it.

http://members.optushome.com.au/michael.deleon/jpg/box.jpg
http://members.optushome.com.au/michael.deleon/jpg/card.jpg

http://members.optushome.com.au/michael.deleon/jpg/plugs.jpg
http://members.optushome.com.au/michael.deleon/jpg/stuff.jpg
http://members.optushome.com.au/michael.deleon/jpg/tek4tv.jpg
hehehe Ps2 Hooked up to the S-video Input

[Updated on: Sun, 13 October 2002 01:44]

  Send a private message to this user    
 Topic: Wheels'n'Tyres
EvilJack
Forums Junkie


I supported Toymods

Location:
Sutho/Hills NSW
Registered:
September 2002
 
Wheels'n'Tyres Mon, 14 October 2002 08:10 Go to previous messageGo to next message
Set of four mustang 195 / 65 tyres on 3 stock 14" corolla rims.

i had them as a spare set incase of a flat or tyre change.

only had them for 4 or so months and have some sx rims lined up and have no need for them as they are taking up the sx rim spot Wink

http://users.bigpond.net.au/rampart/conversion/wheels.jpg

100 bux for the lot.

cheers
  Send a private message to this user    
 Topic: FS: ae86 lsd - who wants it!!!
._T_.
Forums Junkie


Location:
Melbourne
Registered:
May 2002
FS: ae86 lsd - who wants it!!! Tue, 15 October 2002 05:47 Go to previous messageGo to next message
no i don't have one for sale, but this guy JapAndy seems to get them quite often.... last one sold for under $US200....

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?Vi ewItem&item=1868876017


T
  Send a private message to this user    
 Topic: 3.5 V8 rover engine and box
T.J.
Occasional Poster


Location:
Newcastle
Registered:
September 2002
icon10.gif  3.5 V8 rover engine and box Tue, 15 October 2002 08:56 Go to previous messageGo to next message
For Sale
From Rover
3.5L Carby all alloy V8
with fresh reco auto box($1200)
Awsome for conversion in heaps of vehicles.
Still in shell.

The lot for $1000

Very Happy
  Send a private message to this user    
 Topic: ta22 celica gearbox
juzzo84
Forums Junkie


Location:
Hornsby, N.S.W
Registered:
September 2002
icon12.gif  ta22 celica gearbox Wed, 16 October 2002 03:53 Go to previous messageGo to next message
standard celica gbox, no shifter not sure on condition but needs a rebuild. take it away for free and she belongs to you.
cheers JUZZO
0413461518
  Send a private message to this user    
 Topic: Bits To Suit Swift
Rolla Boy
Forums Junkie


Club Member

Location:
Sydney, NSW
Registered:
May 2002
Bits To Suit Swift Thu, 17 October 2002 06:20 Go to previous messageGo to next message
I have a MOMO Boss Kit with all parts and a dashmat to suit a 1995 Suzuki Swift...

$70 for the boss kit...
$25 for the dashmat...
  Send a private message to this user    
 Topic: FS: SUBS 12" & 15" (PICS)
MREMIL
Regular


Location:
Melbourne
Registered:
May 2002
FS: SUBS 12" & 15" (PICS) Sat, 19 October 2002 16:52 Go to previous messageGo to next message
12" JL Audio sub in professional box. Works great. $300
Pic ---> http://members.optushome.com.au/emil/stereo/sub%20 box%2012in%20front.JPG
Pic ---> http://members.optushome.com.au/emil/stereo/sub%20 box%2012in%20side.JPG


15" Orion NT-carbon fibre 1000Watts. In professional ported box. $400 (no pic)

Also, PRICES ARE NEGOTIABLE!

Call me 0413 324 493
Email me emil@optushome.com.au
Private message me on the forums

Im in Melbourne
  Send a private message to this user    
 Topic: Camber/Castor & Coil Over Kit
coowee
Newcomer


Registered:
October 2002
Camber/Castor & Coil Over Kit Sun, 20 October 2002 09:45 Go to previous messageGo to next message
G'day guys,

I have a brand new (fully adjustable) camber/castor kit and a coil over shock kit to suit most early model Celica's. This stuff is all "state of the art". It's all CNC - billet, made by Ground Controls (in the States). The perch's use Torrington bearings and It's all hard anodised. I'm asking $850.00

If anyone's interested, please give me a call (Sydney)

Ph: 0418 228-438
- Michael -
  Send a private message to this user    
 Topic: 7m 5m mid engine mounts
ed_ma61
Forums Junkie


Location:
Lost in the K hole
Registered:
May 2002
7m 5m mid engine mounts Sun, 20 October 2002 10:24 Go to previous messageGo to next message
basically what the title says Smile

$20 sydney

ed
  Send a private message to this user    
 Topic: 18RC Bits
thetoyman75
Forums Junkie


Club President
I supported Toymods

Location:
Sydney
Registered:
May 2002
 
18RC Bits Mon, 21 October 2002 03:58 Go to previous messageGo to next message
I have an 18RC Auto and an 18RC Manual for cheap parts. will seperate bits or take whole engines.

Open to offers.

(1 has what appears to be a new Feul pump)

  Send a private message to this user    
 Topic: RA28 Struts
thetoyman75
Forums Junkie


Club President
I supported Toymods

Location:
Sydney
Registered:
May 2002
 
RA28 Struts Mon, 21 October 2002 04:03 Go to previous messageGo to next message
I hava 2 sets of complete RA28 Struts including calipers.

# Stock ones $50 Pair.

# Lowered set (New lowered springs and shocks about 6 months or so ago) - $150 pending removal from vehicle in next few days
  Send a private message to this user    
 Topic: FS: 4-1 extractors for 18rg/18rgu/18rgeu
THE WITZL
Forums Junkie


Toymods Social Secretary

Location:
Sydney
Registered:
July 2002
 
FS: 4-1 extractors for 18rg/18rgu/18rgeu Tue, 22 October 2002 06:12 Go to previous messageGo to next message
yeah.. those extractors... as seen here.
in sydney is preffered. $80?http://groups.msn.com/_Secure/0LAAAAAIQVmhbOTM75wEZwNB4!486ZsS7RcmbP0Y!8!dlhWJ8RJ!I9O2x9krZKVAYfKhYc77ROJI/extractors.jpg
  Send a private message to this user    
 Topic: Various Celica Parts
4play
Occasional Poster


Location:
Newcastle
Registered:
July 2002
 
Various Celica Parts Tue, 22 October 2002 06:16 Go to previous messageGo to next message
2T Mild Cam, Shaved Head Clean engine $200, 2TG Head has cams and valves but a couple of them are bent $80, Spare set 2TG cams make an offer, and a few other bits and pieces.
  Send a private message to this user    
 Topic: RA60 Front Seats(SOLD)
Bandit
Regular


Location:
Cranebrook, Sydney
Registered:
May 2002
icon6.gif  RA60 Front Seats(SOLD) Fri, 25 October 2002 10:25 Go to previous messageGo to next message
I have a pair of 1982 RA60 Celica front seats i want to get rid of. Will Accept $50 for them or.....Swap for a 4KC Manual engine that is in excellent running condition. call me on 0419198277. I will be at the auction this saturday as well.

[Updated on: Tue, 29 October 2002 03:37]

  Send a private message to this user    
 Topic: AE86 disc brake rear
CelicaRA45
Forums Junkie


Location:
nth ringwood, Victoria
Registered:
August 2002
AE86 disc brake rear Sun, 27 October 2002 12:24 Go to previous messageGo to next message
as above 1 AE86 disc brake rear end non lsd 1000 aud can contact me on 0412 045 467
  Send a private message to this user    
 Topic: S13 Silvia head-up display dash for sale $490ono
mcboom
Regular


Location:
Victoria
Registered:
September 2002
 
S13 Silvia head-up display dash for sale $490ono Sun, 27 October 2002 23:00 Go to previous messageGo to next message
Complete unit in excellent working condition to suit S13 Silvia or 180SX.
  Send a private message to this user    
 Topic: S13 Silvia / 180SX GReddy Intercooler New $2200ono fitted
mcboom
Regular


Location:
Victoria
Registered:
September 2002
 
S13 Silvia / 180SX GReddy Intercooler New $2200ono fitted Sun, 27 October 2002 23:02 Go to previous messageGo to next message
Silvia GReddy Intercooler New in box w/ piping and brackets. Will fit S13 Silvia or 180SX. Price includes fitting.
  Send a private message to this user    
 Topic: GReddy - Speed cut defender
mx83toy
Forums Junkie


Location:
Sydney
Registered:
May 2002
GReddy - Speed cut defender Mon, 28 October 2002 08:09 Go to previous messageGo to next message
Greddy speed cut defender (removes speed cut) taking offers

pm

[Updated on: Mon, 28 October 2002 11:12]

  Send a private message to this user    
 Topic: FWD 4AGE Gearbox
SW20R
Forums Junkie


I supported Toymods

Location:
Sydney
Registered:
May 2002
FWD 4AGE Gearbox Tue, 29 October 2002 06:19 Go to previous messageGo to next message
Off an Twincam 16 88Kw Engine

Originaly brought from Grahams Wreckers Smithfield. Apparently Reconditioned box (took his word. trust worthy guy, purchased various bits and pieces from that place all working tops).

I thought my it was my gearbox thats screwed.. its just the clutch/shift linkages and 2nd gear chrunching sometimes is liveable =p.


I may have original reciept somwhere..

Looking for $200(brought for 250 and its just sitting in the garage)

Comes with clutch cover (needs alittle machining)
Clutch disc (not bad condition)

[Updated on: Sun, 10 November 2002 23:01]

  Send a private message to this user    
 Topic: Soarer Front Bar + Fog Lights + Head Lights + Tail Lights For Sale!
philvella
Newcomer


Location:
Alexandria
Registered:
October 2002
 
icon4.gif  Soarer Front Bar + Fog Lights + Head Lights + Tail Lights For Sale! Tue, 29 October 2002 07:53 Go to previous messageGo to next message
I have a complete 91" Soarer Front Bar including the original fog lamps & Also the Headlights and centre lights all in good condition for sale. Also a mint set of rear lights.

The bar is black and has a few little chips but otherwise in good condition.

Will sell seperately but would preffer to sell the whole front end together and the tail lights seperate.

The front end going for $600 and the tail lights $300 or if someone wants the lot in one go can probably work out a better price.

Contact Phil via email djvella@hotmail.com for photos or any other info.


Phil Vella
www.philvella.com
  Send a private message to this user    
 Topic: RB20 MOTOR Modified computer Complete
1OMC
Newcomer


Location:
Gold Coast
Registered:
October 2002
icon10.gif  RB20 MOTOR Modified computer Complete Wed, 30 October 2002 01:27 Go to previous messageGo to next message
I have an rb20 complete with eng loom and chiptoque modified computer,It has been modified for 1 and 1.2 bar boost with a dash mounted toggle and led,the maps change when u flick the toggle,(dualstage) from r31 gtsx skyline, 1xR32 roller bearing turbo PLUS 1xstandard R31 turbo, standard intercooler, r31 turbo radiator,Turbo brake booster and Master Cylinder Has made 210bhp very reliably..
Perfect for r31 aussie skyline conversion
Can organize transport..
Be Quick.... Shocked Shocked
$1350
  Send a private message to this user    
 Topic: 4 sale digital camera sony dsc-p9.
MRTA22
Regular


Location:
Sydney
Registered:
May 2002
4 sale digital camera sony dsc-p9. Wed, 30 October 2002 22:04 Go to previous messageGo to next message
Hi everyone, sorry i havent been here for ages, i have not been ignoring the people who i received pm's from.
I am selling my camera as above, i paid $1565 for it (have receipt)and i have only used it 2 or 3 times. I am willing to take $1000 for it but not a cent under. It still retails for $1500. It's in the box still with all accesseries etc.
Its 4.1 mega pixel, rechargable battery etc. See the sony website for full specs.
Dont reply here cause i dont know when ill be able to check it. call or sms me on 0408482399. Thanks, hope everyone is well.

Jamie.
  Send a private message to this user    
 Topic: Watanabes
Joshstix
Forums Junkie


Toymods Vice President

Location:
Sydney
Registered:
May 2002
Watanabes Fri, 01 November 2002 09:12 Go to previous message
I remember some people were looking for some Watanabe wheels so I thought I'd put up this link from another forum where some are on offer http://board.performanceforums.com/forums/showthre ad.php?.

I have no idea who the guy is or anything like that, just thought I'd let you guys know.
  Send a private message to this user    
Pages (220): [ «  <  1  2  3  4  5  6  7  8  9  10  11  12  13  14  15  16  >  »]


Current Time: Sun Aug 18 15:13:06 UTC 2019

Total time taken to generate the page: 0.35789489746094 seconds

Bandwidth utilization bar

.:: Contact :: Home ::.

Powered by: FUDforum 2.3.8
Copyright ©2001-2003 Advanced Internet Designs Inc.