| Forum: Engines, Accessories and other Mechanicals |
|---|
| Topic: FS: 20 valve drive shafts |
|---|
Location:
Menai area of Sydney
Registered:
June 2003
|
|
FS: 20 valve drive shafts
|
Sun, 03 October 2004 01:34
|
 |
As per the topic. I have a pair of 20v driveshafts in very good condition. Bought for myself but no longer required. $120
( These have the centre bearing and mounting bracket on the driver's side shaft )
|
|
|
| Topic: 4AG Engine - Setup with Twin Dellorto 40mm - Melb |
|---|
Location:
Melbourne
Registered:
May 2002
|
|
4AG Engine - Setup with Twin Dellorto 40mm - Melb
|
Mon, 04 October 2004 03:22
|
|
I've had a good run with this engine, time to move on.
I had this in my sprinter for just over 2 years, givin it hell and it hasn't quit. 74 rwkw on a Dynamic Test Systems Dyno
RWD Early 3 Rib block and Head - JAPPPP Spec, tho it makes no difference as it runs all 4AC ancilleries.
Redline Inlet manifold
2 x Dellorto 40mm Carburettors - Jetted to suit 4AG
Redline Throttle Linkage
Shorty Trumpets - one got intimate with the brake booster, so looks a bit sad
Stewart Wilkins Racing Extractors - 4-2-1 with heat wraps
Custom Scorcher Distributor - Mechanical Advance
Basically fan to pressure plate, you'll need a few bits like raditor hose, throttle cable, filters, a bit of wiring, a fuel pump
$1400 ono
 |
Attachment: 100_1185.jpg
(Size: 97.96KB, Downloaded 186 time(s)) |
|
|
|
| Topic: FS: 3SGE Gearbox ST162 Manual |
|---|
Location:
brisbane
Registered:
July 2004
|
|
FS: 3SGE Gearbox ST162 Manual
|
Tue, 05 October 2004 05:29
|
|
have a manual gearbox out of st162 with 3sge engine. Missing the fork and reverse light switch. selling due to conversion.
$175
0432 056 625 (brisbane)
|
|
|
| Topic: 4 sale - sell complete or wreck --- toyota corona wagon |
|---|
Location:
wollongong , n.s.w
Registered:
May 2004
|
|
|
| Topic: 1G-FE + IS200 6 Speed |
|---|
Location:
Sydney
Registered:
March 2003
|
|
1G-FE + IS200 6 Speed
|
Wed, 06 October 2004 05:43
|
|
Hey Guys,
Have a 1G-FE motor, Standard, being serviced every 10,000kms, has 70,000kms on it, same with the Gearbox.
1GFE:
2.0 litre Inline 6 (1988CC)
VVT-i
ETCS
24 Valves
Compression: 10.0:1
Stroke/Bore: 75.0 x 75.0mm
Max Output: 114KW (153bhp)@6200rpm
Max Tourque 195Nm (144lb/ft)@4600rpm
6 Speed manual Gearbox, with 70,000kms, Includes Clutch/Flywheel, but Clutch needs replacing.
I will Seperate if Need be.
Asking $2300 the lot or $1500 for Box, and $800 for Engine
Please email me on koffeeblack@gmail.com or just post here!
|
|
|
| Topic: FREE Camry SV21 Autos X2 |
|---|
Location:
Outer Sth East burbs, VIC
Registered:
July 2004
|
|
FREE Camry SV21 Autos X2
|
Wed, 06 October 2004 12:23
|
|
As the title says i have 2 camry SV21 autos, both in various states of disrepair, but both diff centres ok
one has hole in diff casing and only one has torque converter.
Will be going to tip if no interest before next weekend.
|
|
|
| Topic: A341E Auto box from JZX81 chaser |
|---|
Location:
Brisbane
Registered:
May 2002
|
|
A341E Auto box from JZX81 chaser
|
Thu, 07 October 2004 11:59
|
|
Hi Guys,
I have an A341E auto box for sale from a JZX81 chaser. The box has 133,000km's on it. Looking for $150 in Brisbane.
Jason
jasonpurcell@tpg.com.au
|
|
|
| Topic: FS:: RB20DET Complete minus starter motor (MELB) |
|---|
Location:
Melbourne
Registered:
August 2004
|
|
FS:: RB20DET Complete minus starter motor (MELB)
|
Fri, 08 October 2004 12:14
|
|
Hi peeps....
R32 GTST RB20DET engine for sale.
Engine has travelled 80,000kms
Doesnt have the starter
Has full loom and ECU
All plumbing and piping
Std cooler
No gearbox
$1650 ono
If your interested please feel free to contact me on either my phone or via email.
Phone: 0422 930 505
Email: nikora@iprimus.com.au
Price is very negotiable
|
|
|
| Topic: silver20v airflow meter &air box |
|---|
Location:
sydney west
Registered:
April 2004
|
|
silver20v airflow meter &air box
|
Sat, 09 October 2004 13:19
|
|
20valve silvertop airflow meter with airbox and piping
$80
0410 512072
mt druitt
|
|
|
| Topic: 7MGE PARTS. |
|---|
Location:
Sydney
Registered:
November 2003
|
|
|
| Topic: 4AFE Engine complete + gearbox |
|---|
Location:
sydney
Registered:
July 2003
|
|
4AFE Engine complete + gearbox
|
Mon, 11 October 2004 07:51
|
|
 Due to my engine conversion my 4AFE engine and gearbox will be up for sale.
I would prefer to sell it complete with ecu, wiring loom and the stock automatic gearbox.
The details are:
The odometer reads 207,873 genuine KM.
All belts changed including cam belts, timing belts, alternator etc. Water pump also replaced and they have done less than 10,000 kms.
The radiator head has been changed less than 3,000 kms ago.
It is pretty much the stock 4AFE engine block in good condition.
I have receipts for the belts and radiator but still in the process of searching for it, if not my mechanic can vouch for all the work done.
There are no problems with the engine or the gearbox. The engine will be pulled out within the next few days so if you are genuinely interested, please feel free to PM or email me on kayot1k@2die4.com so we can further discuss this.
This package would be great as an upgrade from a carbie to an efi engine.
The engine and gearbox both run well without problems. Always serviced at 5,000km with new oil and genuine oil filters and all the usuals.
I am looking at $400 o.n.o
Here are some pics:
Shot of the engine bay - http://www.geocities.com/glu_tang/Rolla/engine.JPG
Shot of the head - http://www.geocities.com/glu_tang/Rolla/head.JPG
Another shot of the engine bay : http://www.geocities.com/glu_tang/Rolla/engine2.JP G
Shot of the Radiator - http://www.geocities.com/glu_tang/Rolla/radiator.J PG
Shot of the odo reading - http://www.geocities.com/glu_tang/Rolla/odo.JPG
|
|
|
| Topic: Reco Tarago Gearbox |
|---|
Location:
Newcastle, Hunter Valley
Registered:
January 2004
|
|
Reco Tarago Gearbox
|
Mon, 11 October 2004 08:20
|
|
|
Reco Automatic Tarago Gearbox $300
|
|
|
| Topic: 7M-GE Injectors + loom - SOLD !! |
|---|
Location:
Adelaide
Registered:
September 2003
|
|
|
| Topic: WanTed ...Manual GEAR BOX 2 SUIT 1JZ -GTE ...... |
|---|
Location:
sydney
Registered:
June 2004
|
 WanTed ...Manual GEAR BOX 2 SUIT 1JZ -GTE ......
|
Wed, 13 October 2004 04:53
|
|
i need a full conversion kit for a 91 soarer 1jz engine
will pay cash if price is right
call 0412852380 ...in syd
|
|
|
| Topic: Ke36 Diff Wanted 4.5:1 |
|---|
Location:
Brisbane
Registered:
August 2003
|
 Ke36 Diff Wanted 4.5:1
|
Wed, 13 October 2004 05:53
|
|
Hi.. am looking for complete rear end (or just center) from Ke36 Panel van as they had 4.5:1 ratio
Anything taller that will fit in a Ke50 housing??
Am in Brisbane
Ta 
|
|
|
| Topic: ae82 4ag power steer pump reco |
|---|
Location:
Taree (4 hrs north of syd...
Registered:
May 2004
|
|
ae82 4ag power steer pump reco
|
Fri, 15 October 2004 13:41
|
|
|
got reconditioned pump $150
|
|
|
| Topic: Rebuilt and polished ST162/ST165/ST185 alternator with chromed heatshield - nice engine dressup item |
|---|
Registered:
February 2004
|
|
|
| Topic: ra60 drivetrain on ebay |
|---|
Registered:
May 2002
|
|
|
| Topic: F/S Brand New Custom Intercooler |
|---|
Registered:
October 2004
|
|
|
| Topic: Diff RA23-28 |
|---|
Location:
Melbourne
Registered:
May 2003
|
|
Diff RA23-28
|
Sat, 16 October 2004 11:39
|
|
Diff 4.1 complete drum to drun to suit Ra23-28 $50
North East Melbourne
Ross
|
|
|
| Topic: ae82 twincam reco startermotor |
|---|
Location:
sydney west
Registered:
April 2004
|
|
ae82 twincam reco startermotor
|
Sun, 17 October 2004 11:08
|
|
reconditioned starter motor suit 4age twincam
$60
reco cv twincam shafts $100pair
|
|
|
| Topic: OS GIKEN 7M-GTE CLUTCH 4/SALE |
|---|
Registered:
March 2004
|
|
OS GIKEN 7M-GTE CLUTCH 4/SALE
|
Mon, 18 October 2004 00:15
|
|
Hi guys, i have a second hand OS GIKEN twin-plate clutch for sale to suit a 7M-GTE engine, complete with a rebuild kit, effectively making it a new clutch. All parts are included to bolt this to any 7M-GTE engine.
According to OS GIKEN its a TS2B rated at up to 480hp. It also comes with a second hand movement kit which is also needed to install it.
Being a twin-plate clutch its very good for the street and doesn't slip.
I'm asking $1000.
Cheers
|
|
|
| Topic: stuff to go |
|---|
I Supported Toymods
Location:
Perth
Registered:
May 2004
|
|
stuff to go
|
Mon, 18 October 2004 13:30
|
|
some stuff that im trying to get rid of....
silvia auto box, needs new torque convertor + all lines and stuff
sprinter
tail shaft
2 standard front and 3 standard rear swaybars
rear bumper
standard springs
4ac carby + other bits
and some other junk
if for any reason someone is interested in this stuff just ask
Adam
|
|
|
| Topic: FS: 2002 RAV4 Long Motor |
|---|
Location:
Sydney
Registered:
May 2002
|
|
FS: 2002 RAV4 Long Motor
|
Tue, 19 October 2004 07:28
|
|
2002 Rav4 Long motor, seized main bearings, suitable for rebuild. Motor has 54000 kms on it. Oil supply ran dry for main pickup. Rest of rotating components, head and block in good condition. Crank might need linishing. $1000 ono. Sydney
mzam1603@bigpond.net.au
|
|
|
| Topic: ST162 intake |
|---|
Location:
South Australia
Registered:
July 2002
|
|
|
| Topic: Spark Plug Leads for Celica GT4 & Starlet GT Turbo |
|---|
Location:
Brisbane
Registered:
October 2004
|
|
Spark Plug Leads for Celica GT4 & Starlet GT Turbo
|
Wed, 20 October 2004 00:25
|
|
hey guys. i have a mate in japan and he can get Genuine spark plug leads for Celica GT4 ST185 and Starlet GT Turbo EP82, prices are $175 and $190 respectively. if anyones interested, let me know.
BTW, if you need any other parts and you have the part numbers or even if you can give me ur car details such as model and frame no's, let me know and i can get some quotes.
cheers
|
|
|
| Topic: FS: CT20 turbo - good nick |
|---|
Location:
Melbourne
Registered:
November 2002
|
|
FS: CT20 turbo - good nick
|
Thu, 21 October 2004 07:51
|
|
|
Water-cooled off 3tgte - I thought it was buggered as my newly imported motor was smoking badly so I replaced it with T28 off Nissan RB25 about 2 years ago. Still had smokey motor and it turned out to be rust in bores. Based in condition of rest of motor when it was rebuilt its done approx 65K klms. Make me an offer (I need the money to buy rotors for my new GTR - yeah I know I'm a traitor!)
|
|
|
| Topic: stock 20v ecu and air flow meter |
|---|
Location:
Melbourne City
Registered:
May 2004
|
|
stock 20v ecu and air flow meter
|
Fri, 22 October 2004 04:18
|
|
as above, offers on both.
chad
|
|
|
| Topic: delete |
|---|
Location:
sydney
Registered:
September 2004
|
|
|
| Topic: WTB R154 HD clutch |
|---|
Location:
Melbourne
Registered:
November 2003
|
|
WTB R154 HD clutch
|
Sun, 24 October 2004 03:55
|
|
Want to buy a heavy duty for my supra r145 gearbox dont have a clue what to get or where to get it fitted, im in melbourne SE suburbs, Anyone know a good quality workshop where i can get one fitted and a shop where i can buy one.
any info email hbuwalda@bigpond.net.au
Thnx.
|
|
|
| Topic: cheap 5k ( not me selling ) |
|---|
Location:
Sydney
Registered:
May 2003
|
|
|
| Topic: FS: 3sge and 3sgte flywheels |
|---|
Location:
brisbane
Registered:
July 2004
|
|
FS: 3sge and 3sgte flywheels
|
Mon, 25 October 2004 08:19
|
|
have 2 flwheels for sale. one's out of a st162 3sge- $60 and the other is out of a st185 gt4- $120
0403 332 101
cheers
|
|
|
| Topic: ke35 borg warner dif |
|---|
Location:
sydney, the shire
Registered:
June 2004
|
|
ke35 borg warner dif
|
Mon, 25 October 2004 11:13
|
|
|
ke35 b/w diff good nick no noises, recently pulled apart inspected and cleaned up... $50 ono MUST SELL BY THIS COMING WEEKEND!!!
|
|
|
| Topic: Toyota Soarer Half Cut $1 Minus engine, gearbox, computer |
|---|
Location:
Newcastle
Registered:
September 2003
|
|
Toyota Soarer Half Cut $1 Minus engine, gearbox, computer
|
Tue, 26 October 2004 02:02
|
|
Hi boys,
I found this on e-bay so if you want click on link bellow,
http://cgi.ebay.com.au/ws/eBayISAPI.dll?ViewItem&a mp;category=50141&item=2497352274&rd=1
Toyota Soarer Half Cut
1jz-gte (twin turbo) model.
Minus engine, gearbox, computer, engine loom and suspension A arms.
Includes everything in pictures or
Steering Rack
Twin turbo brakes (some minor surface rust otherwise good condition)
Crossmember
Steerin Column
Brake booster and master
Combo switch
Cruise control actuator
Wiper motor
Wiper mechanism
Front struts
|
|
|
| Topic: twin 40's webers with k series manifold |
|---|
Location:
Sydney
Registered:
May 2003
|
|
twin 40's webers with k series manifold
|
Tue, 26 October 2004 12:20
|
|
twin 40 sidedraught webers on k series redline manifold with linkages
good condition
consider swap 4 ae71 manual or complete 4age inc loom ecu and acessories
syd metro
like to finalise sale by weekend yet not going to substancially drop price to sell
$500 ono
|
|
|
| Topic: 5k goodies and other rare stuff |
|---|
Location:
Melbourne
Registered:
June 2003
|
|
|
| Topic: Highly Modified 21-R (out of TA22) |
|---|
Location:
Melbourne, VICTORIA
Registered:
June 2003
|
|
Highly Modified 21-R (out of TA22)
|
Tue, 26 October 2004 22:50
|
|
Hey all, This is a very regretable sale for me! 
I am forced to sell my 21-R due to lack of space, the engine was fully built by me (i am an auto machinist/ engine reconditioner) aprrox 18 months ago although the engine itself was only in use for 9 months due to my car (TA22) being in an accident.
THE ENGINE (at time of rebuild): has been bored .020" oversize, new alloy (lighter)fully floating pistons, whole bottom end (including crank, con-rods and pistons) have been lightened and balanced, brand new brass welch plugs through out.
THE HEAD: Is a BRAND new one never used and is still in box (fully reocnditioned), it has monsterous intake and exhuast ports, chambers and exhuast ports have been polished, all valves are polished multi faced valves, valve seats are extremely hardened and have a 1mm seating face, double lined tightened valve springs and a monsterous billet dragway cam (custom built by 'wade camshafts'), head has been decked mildly to increase compression.
EXTRAS: comes with set of extractors, and a custom built intake manifold which suits twin 40mm sidedraft delauto carbies (carbies not included), the water pump back housing (part of the timing cover) has been weleded for reinforcement to avoid cracking (a common toyota problem).
all reciept for parts bought for this engine have been kept including the invoice for the engine rebuild.
the lot for only $850 o.n.o (+ freight if applicable)
SEE YA!!!
|
|
|
| Topic: 3sgte injectors fs |
|---|
Location:
mackay
Registered:
June 2003
|
|
3sgte injectors fs
|
Fri, 29 October 2004 14:46
|
|
4 X 440cc 3sgte injectors fs.
$150.00
Situated in Mackay but will post any where.
Jeff
|
|
|
| Topic: 2S-c parts CHEAP !!!!! |
|---|
Location:
Tassie
Registered:
October 2003
|
|
2S-c parts CHEAP !!!!!
|
Sun, 31 October 2004 05:09
|
|
M old man wants the shed cleaned out so i gotta get rid of the engine bits.
I've got a full motor in pieces.
I will seperate and will post aslong as buyer pays.
If it's not sold it will be goin to the tip and lost forever.
I've also got a few various other parts like a W55 gearbox.
So come and get it people !!!!!
I'll post pics if people want
|
|
|
| Topic: FS trust tdo5 kit for ca18t |
|---|
Location:
adelaide
Registered:
August 2004
|
|
FS trust tdo5 kit for ca18t
|
Sun, 31 October 2004 09:21
|
|
|
i got a near new trust tdo5 turbo kit from japan. comes with manifoild, turbo and external wastegate. asking 1500bucks or near offer thanks.
|
|
|
| Topic: 4a-ge - off SX twin cam blown (16 valve) |
|---|
Registered:
May 2002
|
|
|
| Topic: This is a For Sale section not WTB |
|---|
Toymods Vice President
Location:
Sydney
Registered:
May 2002
|
 This is a For Sale section not WTB
|
Wed, 03 November 2004 00:38
|
|
Please understand the difference between for sale and wanted ads. This is a for sale section of the forum and therefore is not where wanted ads are to be posted. There is a dedicated parts wanted section of the forum where wanted threads are to be posted.
I have been moving a lot of parts wanted threads from the for sale forums lately, from now on they will be getting moved to deleted.
|
|
|
| Topic: Stock 1JZGTE Twin Turbos |
|---|
Location:
Sydney
Registered:
July 2002
|
|
Stock 1JZGTE Twin Turbos
|
Wed, 03 November 2004 07:41
|
|
FOR SALE
Set of 1JZGTE Stock Twin Turbos.
$600
I can take photos if any one wants pics.
Kristian
|
|
|
| Topic: ae101 4agze supercharger |
|---|
Location:
nsw
Registered:
May 2003
|
|
|
| Topic: EOI. GZE long motor |
|---|
Location:
Brisbane
Registered:
February 2003
|
|
EOI. GZE long motor
|
Sun, 07 November 2004 21:52
|
|
I have replaced original GZE with a lower k's long motor and so have a spare. It was blowing a bit (not huge amount)of smoke when given a bit of throttle but I was topping up the oil monthly.
Don't get much time for the net so here are some alternative contacts llawntec@bigpond.net.au 0412675378
|
|
|
| Topic: CT-20 turbo - ACT |
|---|
Location:
ACT
Registered:
November 2004
|
|
CT-20 turbo - ACT
|
Sun, 07 November 2004 22:31
|
|
CT-20 turbo off import 3T-GTEU in very good condition.
$190 located in Canberra.
Also bits to suit KE series corolla... twin carbies, door trims, proffesionally locked diff, wheels, swaybar...
Make an offer - it all has to go!
|
|
|
| Topic: ae92 eagle ignition leads $70 |
|---|
Location:
Brisvegas
Registered:
June 2003
|
|
ae92 eagle ignition leads $70
|
Mon, 08 November 2004 03:42
|
|
ae92 4age ignition leads #e54573
brand new, never used & still boxed. $100 in shops...asking $70
brisbane buyers pref
|
|
|
| Topic: FS: RX7 13B Turbocharger |
|---|
Location:
Rockhampton, Queensland
Registered:
October 2004
|
|
FS: RX7 13B Turbocharger
|
Tue, 09 November 2004 00:26
|
|
I have one HT18 Turbocharger for sale!
Please look here for details and images.
Kind Regards,
Daniel
|
|
|
| Topic: Vision R - New Engine Parts now available |
|---|
Forums sponsor
Location:
Perth
Registered:
August 2002
|
|
|
| Topic: f/s: 3T extractors, recon. carbie, extreem clutch. $50each. |
|---|
Location:
Adelaide
Registered:
December 2002
|
|
f/s: 3T extractors, recon. carbie, extreem clutch. $50each.
|
Wed, 10 November 2004 05:04
|
|
Having a clean out & this stuff needs to go.
-1 set of 4-1 tuned lenght press bent extractors.$50
-1 Recondtioned & rejetted Carbie with recipts (near new).$50
-1 extreem cultch kit (near new, 80% life left). $50
postage can be arranged.
call or sms Rick
#0410 654 912
|
|
|
| Topic: Second-hand A/C Evaporator cost? |
|---|
Location:
Melbourne
Registered:
November 2004
|
|
Second-hand A/C Evaporator cost?
|
Thu, 11 November 2004 10:20
|
|
Guys i am looking for A/C Evaporator for my 94-96 Camry V6 3.0.
How much they cost at the wrecker, just don't want to be rip off,
Thanks 
|
|
|
| Topic: r154 very rare soarer box for sale |
|---|
Location:
perth WA
Registered:
January 2003
|
|
|
| Topic: st185 gt4 intake manifold |
|---|
Location:
brisbane
Registered:
February 2004
|
|
st185 gt4 intake manifold
|
Fri, 12 November 2004 04:42
|
|
|
stock inlet manifold with throttle body etc.. $50
|
|
|
| Topic: HKS Twin Plate clutch pressure plate flywheel for RB25 |
|---|
Registered:
July 2004
|
|
HKS Twin Plate clutch pressure plate flywheel for RB25
|
Fri, 12 November 2004 15:22
|
|
Posted on behalf of my mate
needs to sell this to free up cash
90% new.. no pics until he passes it to me
interested PM me
|
|
|
| Topic: Reco 2tg...... |
|---|
Location:
Adelaide, Semaphore
Registered:
September 2004
|
|
Reco 2tg......
|
Mon, 15 November 2004 21:59
|
|
|
Did anyone see the 2tg that was on ebay the last few days, it looked mighty sweet for $1700 for the complete engine which had all the machining and new rebuild kit for. Does it belong to anyone on this site, if so, I am interested in getting this engine through my work account... It came with loom, computer, t50 gearbox, ballanced, and all the periphial engine parts to have it a turn key engine, it just needed to be rebuilt.
|
|
|
| Topic: GZ20 clutch pedal and G/box c/member |
|---|
Location:
Darwin
Registered:
September 2003
|
|
GZ20 clutch pedal and G/box c/member
|
Wed, 17 November 2004 03:15
|
|
I have these things leftover from a conv,handy for another kind of conv Auto/manual?
Ta Guy
|
|
|
| Topic: FS: **AS NEW ** LARGE GARRETT TURBO = 500RWHP + |
|---|
Location:
nsw
Registered:
April 2003
|
|
FS: **AS NEW ** LARGE GARRETT TURBO = 500RWHP +
|
Thu, 18 November 2004 08:27
|
|
guys,
the turbo is fully streetable and capable of big power only selling due to upgrade.
its done less then 1000kms and is 110% perfect.
0.72 comp cover, Turbonectics t72 comp wheel, 1.15 gt42 style exhaust housing, gt45 spec rear wheel.
this is not a cheap shit ex truck turbo, it was built brand new from gcg, and then high flowed by Dynotorque turbos.
also has very large thrust bearings and is built to last, on high boost.
will sell turbo for $1700 cost over $2500 to build SAVE $800
also have a top quality manifold to suit 13bt, will fit most cars $350
sell both for $2000.00
first to see will buy
|
|
|
| Topic: SA63 2S engine and 5 speed celica box on ebay |
|---|
Location:
Perth
Registered:
August 2003
|
|
|
| Topic: fs:430s |
|---|
Registered:
December 2002
|
 fs:430s
|
Fri, 19 November 2004 06:09
|
|
I have six 430cc Fuel Injectors from a Toyota 7MGTE.
They have been cleaned and flowed-test and have new o-rings installed.i askin for $300ono
|
|
|
| Topic: F.s 4agze head |
|---|
Location:
Brisbane
Registered:
May 2004
|
|
F.s 4agze head
|
Fri, 19 November 2004 10:31
|
|
i have a 4agze head for sale chasing $250 for it
im in brisbane
anyone intrested can contact me on 0413 114 801 brisbane buyers only please
and also Blitz BOV $150
|
|
|
7MGE PARTS.
