| Forum: Tech & Conversions |
|---|
| Topic: Speed sender/sensor for 4AG ECU |
|---|
Registered:
May 2002
|
 Speed sender/sensor for 4AG ECU
|
Wed, 15 May 2002 05:46
|
 |
Hi guys,
My KE70 is finished as far as the conversion is concerned. For those who don't know, I had a 100KW 4ag put into it...
Anyway, it pulls hard to 4000RPM but above this, seems not to come on as strong as it should. (Shouldn't peak power be above 4000?)
Speaking to the bloke who did the conversion, it appears it may need some kind of speed signal (from the speedo??) to the ECU, otherwise the ECU leans out the mixtures or something, making it not go as well as it might.
Does anyone have any ideas on how to fix this?
|
|
|
| Topic: Struts,Hubs and Stub axels |
|---|
I supported Toymods
Banned User
Location:
Brisbane
Registered:
May 2002
|
|
Struts,Hubs and Stub axels
|
Fri, 17 May 2002 10:10
|
|
|
Whats the difference between Ta22 and Ta23 Struts, Hubs and Stub axels?
|
|
|
| Topic: Dash mounted auto shifter display |
|---|
Location:
Brisbane, QLD, Australia
Registered:
May 2002
|
|
Dash mounted auto shifter display
|
Fri, 17 May 2002 11:01
|
|
Just wondering before I hunt one down, would my car already have the wiring for the dash mounted automatic transmission display? (The bar that is inbetween the speedo and the tacho). And would a real camry one just go in? IE: Holden didn't change the instrument panel? I should really go have a good look at a real camry. 
Thanks.
|
|
|
| Topic: bigger injectors with standard 1ggte ECU |
|---|
Registered:
May 2002
|
|
bigger injectors with standard 1ggte ECU
|
Fri, 17 May 2002 13:39
|
|
Has anybody fluked using some sort of larger injector other than standard on a standard ecu in a 1ggte. Or any motor with a standard ecu for that matter????
Just asking
Cheers
|
|
|
| Topic: ECU for 100kw 4AGE? |
|---|
Location:
AKINA Tofu shop
Registered:
May 2002
|
|
ECU for 100kw 4AGE?
|
Sun, 19 May 2002 04:29
|
|
can anyone suggest me some brand and
give me the price as well?
and how is the different after it get installed?
top speed? horse power?
my car is orginal 100kw AE86,
have exhaust, air filter only.
|
|
|
| Topic: More suspension |
|---|
Location:
sydney,greystanes
Registered:
May 2002
|
 More suspension
|
Tue, 21 May 2002 00:26
|
|
Hey guys im looking at lowering my 85 sprinter & im just wounderin if ne1 knows anywhere in sydney were i can get king springs not necessarily fitted, prices please
cheers mick 
|
|
|
| Topic: 4age TPS wires |
|---|
Location:
Terrigal
Registered:
May 2002
|
|
4age TPS wires
|
Tue, 21 May 2002 04:32
|
|
Hello, I've got a 4AGE TPS that I am going to use on an autronic system.
I need to find out what each of the 4 wires are that come out of it.
Only require +ve -ve and signal.
Anyone know which ones these are?
Thanks
|
|
|
| Topic: S14 Silvia Electric Seat Adjustmet |
|---|
Location:
Carlingford, Sydney
Registered:
May 2002
|
|
S14 Silvia Electric Seat Adjustmet
|
Tue, 21 May 2002 06:41
|
|
Does anyone know how to hook up the Electric Seat Adjustment on S14 Silvia seats
there is a plug with 3pins and a plug with 2 pins + there is a 2 pin plug on the non electric passenger seat
Does anyone know what the plugs configuration is?
any website or info on this would help heaps
BTW - there going into my KE30
Thanks
|
|
|
| Topic: JZZ30 LSD 4.083 AXLE CODE |
|---|
Location:
Sydney
Registered:
May 2002
|
|
JZZ30 LSD 4.083 AXLE CODE
|
Tue, 21 May 2002 12:31
|
|
Anyone know the axle code for 4.083 ratios with LSD on the Soarer?
Also, besides the Soarer, what other Toyota models was this combination available on?
|
|
|
| Topic: Backyard Operation |
|---|
Registered:
May 2002
|
|
|
| Topic: AFR meter - anyone got one? |
|---|
Location:
Montrose, VIC
Registered:
May 2002
|
|
AFR meter - anyone got one?
|
Fri, 24 May 2002 13:59
|
|
Is anybody lucky enough to have access to an accurate air/fuel ratio meter that I could hire/borrow/beg/polish their shoes for? Or maybe an idea who I could ask? Various 'experts' have tried tuning my car, without being entirely successful, so I figure I'd like to have a bit of a go myself, and I'd like to use something slightly better than a $10 LED mixture meter. Thanking you greatly! 
|
|
|
| Topic: Spray Painting costs? |
|---|
Location:
Glossodia,NSW
Registered:
May 2002
|
|
Spray Painting costs?
|
Tue, 28 May 2002 13:01
|
|
|
I've just repaired my rear bumper (ae92 jetspeed rear bar) I've given it a all over sand with 400 wet/dry sandpaper.How much should it cost to get it sprayed?
|
|
|
| Topic: Engine bushes / idle sensor |
|---|
Location:
Castle Hill
Registered:
May 2002
|
|
Engine bushes / idle sensor
|
Tue, 28 May 2002 22:51
|
|
I have an 1986 Seca SX (white, lowered all the way).
It has a 100kW 4AGE put in it (by previous owner).
The engine bushes are worn / out / half missing and I need to replace them.
Do I need bushes to suit my body or my engine?
Are they the same anyway?
How much is involved in replacing them (time and money)?
I am sick of the clunking every time I accelerate!
Also, need a new idle sensor (i think)- stays at 2000, with full slack on throttle cable. How much, where from?
|
|
|
| Topic: Possible broken gearbox linkage |
|---|
Location:
adelaide
Registered:
May 2002
|
|
Possible broken gearbox linkage
|
Wed, 29 May 2002 12:47
|
|
Hello, i have a 5 speed 1977 ra28 celica and i managed to snap something in the gearbox the other day reseulting in a slow tow down a local main road home... the gear stick has become loose and movable and can move through the positions of all top-row gears with no restriction but can not go into the bottom row, there is no feel of any gears moving though or contact with moving the stick. I believe it is stuck in neutral(unless my clutch is kaput) Would anyone knowledgable of gearboxes be able to tell me what i could have done? i am lucky tho as i have had the car for a fair while now and this is the first thing to break, since it is an old car and fairly stock. i have removed only the top plate of the shifter and not proceeded any further as yet.
a friend of mine said it is probably the selector which is broken or something similar, and probably not terminal hopefully.. any comments or advice would be greatly appreciated. anyone know of anyone that specialises in this type of job in Adelaide??
-Guy
BlackRA28
18rc
|
|
|
| Topic: re: urgently required for MR2 |
|---|
Location:
Melbourne
Registered:
May 2002
|
|
re: urgently required for MR2
|
Thu, 30 May 2002 07:52
|
|
Hi all
I really need a wiring diagram for a 3SGTE 91 turbo Jap spec GT MR2 and a 3SGE 94 Aussie spec GT MR2.
I need this really really quickly! Please supply any links you may know of as I am looking extensively at the moment.
regards,
richard@satworld.com.au
Richard Taranto - 0402 844 698
|
|
|
| Topic: Fuel pressure regulators - Turbo/NA? |
|---|
Location:
Terrigal
Registered:
May 2002
|
|
Fuel pressure regulators - Turbo/NA?
|
Mon, 03 June 2002 03:49
|
|
Hello, wondering if there is a diference between fuel pressure regulators designed for a forced induction engine and a NA engine?
Thanks!
|
|
|
| Topic: 1jz box prob |
|---|
Registered:
June 2002
|
|
1jz box prob
|
Wed, 05 June 2002 01:22
|
|
|
Hey guys.... I have a question to ask the 1j gurus. I am getting or have had my gearbox rebuilt for my car and the rpob is that the manual switch next to the selector is playing up. The guy that is fixing it says that it is dropping the line pressure in the box and he doesnt know how the sitch works or what solenoid in the box it activates or anything like that and neither do I. I was wondering if anyone out there knew of this happening and how to fix it or even if anyone has the wiring diagram for the gearbox itself and associated parts. Any help IS greatly appreciated. Thanks.
|
|
|
| Topic: big valve on 4AG and port question? |
|---|
Location:
Brisbane
Registered:
June 2002
|
|
big valve on 4AG and port question?
|
Wed, 05 June 2002 06:26
|
|
Is the 20V inlet port similar size to small port 16v inlet port?Bigger or smaller?
16V 4AG has the option for big valve, inlet/exh, 33.4mm/27.5mm and 32mm/27.5mm. Will the 33.4 inlet valve be any obstruction in the combustion chamber?ie too close to the wall of the chamber.
Is it true with bigger inlet valve like 33.4mm and keeping the inlet port stock(w/o porting), we can keep the air velocity up and use less duration cam for broader power/torque range
|
|
|
| Topic: FIELD SFC-Hyper R |
|---|
Location:
AKINA Tofu shop
Registered:
May 2002
|
|
FIELD SFC-Hyper R
|
Wed, 05 June 2002 07:22
|
|
|
anyone using?
|
|
|
| Topic: Throttle bodys (again) |
|---|
Location:
Brisbane, QLD, Australia
Registered:
May 2002
|
|
Throttle bodys (again)
|
Wed, 05 June 2002 11:26
|
|
Ok, so I can't get one to bolt straight on. I'd need an adapter.
Can I at least get one that will hook up all hoses fine? (5sfe).
Also, what about dual throttle body's? Exactly how do those work? Are they like the old dual barrel carbs? One would do most of the work, but, on FOT the 2nd one would also open?
|
|
|
| Topic: wiring and insanity, both go hand in hand |
|---|
I supported Toymods
Location:
NY
Registered:
May 2002
|
|
wiring and insanity, both go hand in hand
|
Thu, 06 June 2002 06:10
|
|
After hours of staring at the body loom, i realised that i need the ecu pin outs for the ae 92 and wires for that too. What do you do for the 12p plug and where did you get the info for it (pin outs and colours etc).
so far it looks like this for me
20 v map Wire Colours ECU pinout description
pin 1 - +B1
2 RW BATT
3 Light green CCQ or CCO
4 - FC
5 BY AC2
6 RY ACT
7 BR +B
8 R yellow or orange or light brown....unsure W
9 R EGW
10 BW AC1
11 VW SPD SP1
12 B ELE2
That is what I have seen to the best of my poor vision. If what is there helps
you to help me PLEASE HELP ME. I am a little confused with it all now.
Also what of that loom do i need
Leigh
|
|
|
| Topic: Seatbelts - URGENT |
|---|
Registered:
June 2002
|
|
|
| Topic: Hubs for a 3SGTE |
|---|
Location:
Central Coast
Registered:
June 2002
|
|
Hubs for a 3SGTE
|
Fri, 07 June 2002 15:53
|
|
please help me, i have an MR2 turbo gearbox with LSD in my car and the driveshafts have been modified (made smaller) to fit my celica hubs. The problem is that i keep destroying c/v's so i want to use the full mr2 shafts. Now is there anyone here that can tell me if i can either swap MR2 rear hubs to my front OR if i can use hubs from a V6 manual camry as they both have the E153 gearbox???????
PLEASE HELP ME no one seems to be able to help me?????
PLEASE!!!!
|
|
|
| Topic: FIELD SFC HYPER-R |
|---|
Location:
AKINA Tofu shop
Registered:
May 2002
|
|
FIELD SFC HYPER-R
|
Sat, 08 June 2002 05:05
|
|
anyone got the Manuel for
FIELD SFC HYPER-R..
or any one has installed it into 4AGE ...
can share the experience?
|
|
|
| Topic: Tojo diff sizes/codes/ and donor cars |
|---|
Location:
Perth, WA
Registered:
May 2002
|
|
|
| Topic: Brakes Question... |
|---|
Location:
Melbourne
Registered:
May 2002
|
|
Brakes Question...
|
Thu, 13 June 2002 11:01
|
|
Hey all,
When my car has been driven for a while and everything is at operating temperature. Under light braking when speeds decrease to say 40km/h I can hear a metal scrapping/grating noise, not the low material indicators... The discs are fine there is no pulsating.
If I coast in a car park and lighlty apply the brakes the noise is there, very loud. If I pump the brake pedal at idle there is a squishing noise (ie: if you squeeze a detergent bolt that is empty lightly it will be a sound like my brakes are making, that appears to come from the mastercylinder. The calipers creak also.
My thoughts are that there is alot of air in the system and that the pads are not being pressed against the discs firmly enough, hence the grating/scraping noise.
I am up for suggestions, I believe new pads/bleeding might fix it but if you know or believe that it is something else then please comment!
thanks in advance.
|
|
|
| Topic: 4 Wire O2 Sensor |
|---|
Location:
Colyton, NSW
Registered:
May 2002
|
|
4 Wire O2 Sensor
|
Wed, 19 June 2002 13:23
|
|
Hi Guys ,, need help'
my o2 sensor has 4 wires.. does any one know what it is made of??
i assume1 is a +12V, there must me a ground aswell
what are the other 2 wires doing there???
colour coding wouldbe nice...
|
|
|
| Topic: General Questions |
|---|
I supported Toymods
Location:
NY
Registered:
May 2002
|
 General Questions
|
Wed, 19 June 2002 16:03
|
|
Could some one please tell me the folloeing answers:
Does any one here know what the colours are for the exhaust temp sensor and the o2 sensor are(that is on the connector in the bay plug) for a silver top 20v??
Also is the standard extractors thru to first cat on the 20v worth keeping or would someone recommend me to get aftermarket units??
Thanks
LP
|
|
|
| Topic: ECHO / Corolla 1NZ-FE Turbo & Racey Bits |
|---|
Location:
Myrtleford Victoria
Registered:
June 2002
|
|
|
| Topic: Trevor - TA22/3SGTE |
|---|
Location:
Brisbane -northside
Registered:
June 2002
|
|
Trevor - TA22/3SGTE
|
Wed, 19 June 2002 23:15
|
|
|
Wondering if you could post/send any pics of your conversion. Starting the same myself so any short cuts/hassles etc. would be welcome. Did you recess/box firewall for head overhang, or shift engine forward? Did you ditch dizzie & running coil pacs with crank trigger? What did you use for engine mounts? Interested to hear from anyone else doing same conversion.
|
|
|
| Topic: BLACK TOP 20V&6sp 1/2 cut price?Please |
|---|
Forum Sponsor
Location:
Shepparton (Vic)
Registered:
May 2002
|
|
BLACK TOP 20V&6sp 1/2 cut price?Please
|
Fri, 21 June 2002 04:28
|
|
|
Can someone please give me a price on a black 20 valve 6 sp 1/2. cut. It wont ever be avail in Aust if I cant give a price.
|
|
|
| Topic: Link to AE86 EFI electrical diagrams |
|---|
Location:
Melbourne
Registered:
May 2002
|
|
|
| Topic: chassis dyno, not accurate |
|---|
Location:
Finland
Registered:
June 2002
|
|
chassis dyno, not accurate
|
Sun, 23 June 2002 09:41
|
|
many seasoned enthusiasts know that chassis dynos can be way off from true readings.
i shall include here a link that'll explain this more thoroughly. (note - further links have been operational, for some reason just today links on that page don't work - try them later).
nevertheless, no matter how far off the calibration is, it still can be used in fine tuning of engine.
i hope this helps someone out there.
http://sdsefi.com/techdyno.htm
|
|
|
| Topic: 2TGEU Timing & Injectors |
|---|
Location:
New Zealand
Registered:
May 2002
|
|
|
| Topic: AE92 Lower Control Arm Bush replacement |
|---|
Registered:
May 2002
|
|
AE92 Lower Control Arm Bush replacement
|
Fri, 28 June 2002 09:59
|
|
Hi,
I need some advice on replacing front lower control arm bushes for an AE92 Seca. I know the existing bushes need replacement, and have decided on new nolathane bushes.
My question is: is this a job I can do at home?
I enjoy general maintenance on my Corolla, but critical systems such as shocks/springs I have taken to experts in the past.
Other questions:
What is the general process for bush replacement?
Are any special tools required?
Is worn bushes a reason for rejecting registration renewal?
What sort of price ranges have people paid in the past for this job?
Thanks for your help,
Brian.
|
|
|
| Topic: Supra Steering Noise |
|---|
I supported Toymods
Location:
Perth WA
Registered:
May 2002
|
|
|
| Topic: RWD 4A-GZE Block only, Water Pump/Thermostat |
|---|
Location:
Auckland, New Zealand
Registered:
May 2002
|
|
RWD 4A-GZE Block only, Water Pump/Thermostat
|
Fri, 28 June 2002 21:29
|
|
|
Has anyone tried using the RWD 4A-GE Water Pump/Thermostat and lines on a 4A-GZE block, I lined it up yesterday but the bar that goes from the water pump to the back of the motor hits the knock sensor.
|
|
|
| Topic: wiring |
|---|
Registered:
June 2002
|
|
wiring
|
Sun, 30 June 2002 23:49
|
|
hi guys
in my ae92 cs, where the ecu is mounted on the efi corollas, i have a blue box of some sort. What is this blue box and is it still needed when doing a 20v conversion into my car or does the 20v ecu do everything? Has it got something to do with polution gear? Thanks guys
|
|
|
| Topic: New addition to the K-Mac swaybar line-up... |
|---|
Toymods member
I supported Toymods
Location:
Rydalmere, NSW
Registered:
May 2002
|
|
New addition to the K-Mac swaybar line-up...
|
Mon, 01 July 2002 12:46
|
|
Received an email from K-Mac today after my visit to Sydney for the Weight-Watcher's event. One of the reasons I went to Sydney was to see K-Mac for a measure-up of the rear-end of the RAV4 - they initially said that it couldn't be done; upon visiting the K-Mac store in Rockdale, they then said that it could be done, but with all the extra bracing it would cost in the vicinity of $350 - $400 for the rear to be supplied and fitted; today I get an email from them that said the rear swaybar for the long-er wheelbase RAV4 is in production and now available for $225 supplied. The funny thing is that they made up this swaybar modelled off MY RAV4! (I hope the rear end wasn't screwed up or dented when they took the measurements...) 
They also recommend that the rear swaybar be used in conjunction with the front one as well. Whether this is practical or not, or just a sales stunt, I'm not sure. 
The RAV isn't much of an understeerer, and handles OK now the new suspension is fitted up and broken-in. I can't really see the rear-end getting all that tail-happy around corners, but I want the suspension all-round to be stiffer.
Any thoughts/ideas on the matter?
Cheers.
|
|
|
| Topic: 7mge to gte |
|---|
Location:
sydney
Registered:
July 2002
|
|
7mge to gte
|
Tue, 02 July 2002 10:08
|
|
Hi guys,
I was after a few mod ideas for my 7mge in my cressida. After a bit of dent poping and before buying some decent wheels lol.I was thinking along the line of the turbo off the gte but is it worth it? or am i wasting my time? I would really like to here from some 7mge owners on what mods they have done.
"TO MOD ,OR KEEP THE STOCK THAT IS THE QUESTION"
|
|
|
| Topic: 3vz-fe's |
|---|
Location:
Georgia, US
Registered:
July 2002
|
|
3vz-fe's
|
Tue, 02 July 2002 14:33
|
|
|
hey I was just wondering whos working on a 3vz-fe engine? What have you done to it...and future mods?
|
|
|
| Topic: Bits for a Sprinter |
|---|
Location:
Melbourne, Australia
Registered:
July 2002
|
 Bits for a Sprinter
|
Tue, 02 July 2002 16:45
|
|
|
Recently scored myself an 85' Sprinter. Now I look at it and think, hmm, yeah its kinda kool lookin but it looks kinda plain. Then i have the brainwave.. "Trueno Front" now im certainly not the first person to have said idea I know. What i need is a place that will either have one or can somehow get me one. Im in the melbourne area but am not limiting myself to places in victoria so any help is appreciated. (Had my heart set on a Trueno for a few years and this is the best thing i could find for the time being, also a place that might have suitable engine conversions wouldnt hurt either, ge, gze you know the drill) anyways like i said any and all help is greatly appreciated.
|
|
|
| Topic: JZA70 Mounts needed |
|---|
Registered:
July 2002
|
 JZA70 Mounts needed
|
Thu, 04 July 2002 14:59
|
|
HELP!!! I really need a set of JZA70 1JZ engine mounts. The metal ones that bolt to the block. If you have a set or can locate a set, please let me know.
I tried the JZA80 mounts, but they mount up about 1-2 inches too far forward.
Thanks,
-Chip
supras@mac.com
|
|
|
| Topic: 1uz into Hilux 1994(2wd) |
|---|
Forum Sponsor
Location:
Shepparton (Vic)
Registered:
May 2002
|
|
1uz into Hilux 1994(2wd)
|
Fri, 05 July 2002 04:25
|
|
|
Can anyone help. Will it fit.
|
|
|
| Topic: Faulty valve behavior? |
|---|
Location:
Hobart, TAS
Registered:
May 2002
|
|
|
| Topic: Brake upgrade : AE71 |
|---|
Location:
Maroubra
Registered:
June 2002
|
|
Brake upgrade : AE71
|
Fri, 05 July 2002 19:29
|
|
G'day
I need to upgrade my brakes due to the fact that i have a 4a-gze in my baby...
i was told that the front brakes from a mx73 cressida with a little modification would go nicely and the rear end from an ae86 sprinter (LSD???) would also go pretty much straight on.
Any ideas or comments please let me know
|
|
|
| Topic: were to get new or used ae92 4agze cv from? |
|---|
Location:
adelaide
Registered:
May 2002
|
|
were to get new or used ae92 4agze cv from?
|
Sat, 06 July 2002 05:43
|
|
hi i was wondering would anyone know were i can get second hand or brand new ae92 4agze cv from because i brought some with the gear box but on one of the cv the end of it has been all pushed in were you put the nut on and the slipt pin in so yeah if anyone know give me a msg
dont say at toyota becausde they want to much
thanks
|
|
|
| Topic: What can i do?? |
|---|
Location:
Sydney
Registered:
July 2002
|
|
|
| Topic: Need a big arse favour... |
|---|
Location:
Montrose, VIC
Registered:
May 2002
|
|
Need a big arse favour...
|
Sun, 07 July 2002 07:55
|
|
Hey there peoples
I went to the dyno day today, had a real good day. My car was the ae86 on LPG/turbo. I was happy with the way the car went and all, but a small problem - on the way home I busted 2nd gear! Does anyone happen to have a spare T50 around that they'd sell to me? Also, can someone suggest a workshop around the baulkham hills area that might let me use their tools etc. to shove it in? GREATLY APPRECIATED!
|
|
|
| Topic: 18RG mods?? |
|---|
Location:
near chris and murray vic
Registered:
July 2002
|
|
18RG mods??
|
Mon, 08 July 2002 07:42
|
|
|
I've recently bought a ra23 with 18RG engine and hot cams. any ideas for some mods for a bit more power that wont go and break my (relatively small) bank?
|
|
|
| Topic: lexus/soaer alternator specs? |
|---|
Registered:
July 2002
|
|
lexus/soaer alternator specs?
|
Mon, 08 July 2002 17:02
|
|
hello all,
can anyone tell me what the amperage rating is on a lexus/soarer jap import 4litre altrnator?
many thanks.
|
|
|
| Topic: Help identifying a gearbox |
|---|
Location:
Perth
Registered:
July 2002
|
|
Help identifying a gearbox
|
Tue, 09 July 2002 04:16
|
|
Hey all,
I have recently got a 4AGZE engine, and a spare gearbox thrown in. I am not too sure what type the gearbox is though. I have been told it was a GZE box but the guy was not 100% sure.
I found the serial number just next to the dust cover for the release lever. It reads:
A90700661
On the main drain bolt (lock bolt?) it has a warning written in English saying to consult the user's manual before opening.
Near the rear torque mounting there is a cylndrical metal valve that reads "YAZAKI < METER". If it's at all relevant, i found this site... http://www.yazaki-na.com
Are these enough clues to identify it ??
Thanks,
Liam.
|
|
|
| Topic: Cam pulleys.... |
|---|
Location:
Melbourne
Registered:
May 2002
|
|
Cam pulleys....
|
Tue, 09 July 2002 12:03
|
|
I just wondering if there is any different, in terms of power, to the a stock 4age by just changing the original pulleys to the adjustable cam pulley,....
thanks...
|
|
|
| Topic: Pop Up Headlights |
|---|
Location:
Central Coast NSW
Registered:
July 2002
|
|
Pop Up Headlights
|
Wed, 10 July 2002 00:44
|
|
Hey all,
Has anyone attempted to put the popup headlights from a supra, celica, levin etc into an AE92 ? 
I'm currently in the process of modding my GTi Hatch, and reckon they'd look sweet as... besides the obvious pannel work.. and getting an autoelectrian to wire them up, there shouldnt be any issues with the rta?
I've deciding on which front bar i want, and the gze conversion is coming l8r....
On that note,
I'm getting a AE101 GZE half cut with either gze box or 20v 6 Speed, I want to get around 180KW at the wheels.... The GZE is getting a rebuild and what whould you reckon would be needed to get this sorta power.
I was looking a Big Arse Turbo - Havent decided on what one yet ( any ideas  ), Supra Front Mount Cooler, 3" Mandrel Bent straight through system, dual boost controlla (for when the missus drives)  , DBA Slotted Rotors, Twin Pot Calipers, Briaded Hoses ( ne1 know if braided brake lines are legal in NSW? ) Supra Injectors, etc... etc...
|
|
|
| Topic: Need to look at a 5m-ge |
|---|
Location:
Lost in the K hole
Registered:
May 2002
|
|
Need to look at a 5m-ge
|
Wed, 10 July 2002 10:53
|
|
does anyone in syd have a 5m-ge disassembled, or lying around, that i can come have a look at?
i need to know how involved it is whacking a 5m-ge head onto the 'ol 5m-e block. ie how do the timing belt pullies fit, is the oil pump shaft different, is the crank shaft different etc etc
would be MUCH appreciated.
cheers
ed
|
|
|
| Topic: Needed - Pic of ta22 with B45 simmons |
|---|
Location:
Colac, Victoria
Registered:
May 2002
|
|
Needed - Pic of ta22 with B45 simmons
|
Thu, 11 July 2002 09:38
|
|
Needed - as title suggests
Anyone out ther have a decent side on or semi side on picture of a ta22 with the b45 series simmons wheels on it ?
The wheels are similar to those on the whit ta22 that pops up in the titles on tioymods - cept the sytle is a star - instead of flat ..
I need it for photoshop doctoring - to see how said wheels wwill look on mine
Stuart
|
|
|
| Topic: Suspension Lights Flashing |
|---|
Location:
brisbane
Registered:
May 2002
|
|
Suspension Lights Flashing
|
Fri, 12 July 2002 08:01
|
|
Hi,
I am having the problem with the lights on the suspension adjuster keep constantly flashing like the soft medium and hard lights all together. Its a 1988 Nissan Maxima ( turbo if it means anything ) i was just wondering because it is AFAIK similar to tems? IF that happens to the tems buttons what does it mean. Or even better what does it mean in my case. Any help would be appreciated.
Thnx
Matt
|
|
|
| Topic: interesting mr2 |
|---|
Location:
Mentone
Registered:
May 2002
|
|
|
| Topic: Turbogal's 11 sec engine setup in sprinter ? |
|---|
Location:
Bonnet Bay
Registered:
July 2002
|
|
Turbogal's 11 sec engine setup in sprinter ?
|
Fri, 12 July 2002 14:22
|
|
the engine setup that turbogal has in her 11 sec corolla.
would a setup something along those lines be able to get done in a ae86 sprinter??
Pete
|
|
|
| Topic: how much should I paid for a 7m-gte front-cut with manual? |
|---|
Location:
Perth
Registered:
June 2002
|
|
how much should I paid for a 7m-gte front-cut with manual?
|
Fri, 12 July 2002 18:25
|
|
|
as title. Is there any cheapes?
|
|
|
ECHO / Corolla 1NZ-FE Turbo & Racey Bits
