Toymods Car Club
www.toymods.org.au
F.A.Q. F.A.Q.    Register Register    Login Login    Home Home
Members Members    Search Search
Today's Posts (OFF) | Unanswered Posts (ON)


Forum: Tech & Conversions
 Topic: Speed sender/sensor for 4AG ECU
biased99
Forums Junkie


Registered:
May 2002
icon9.gif  Speed sender/sensor for 4AG ECU Wed, 15 May 2002 05:46 Go to next message
Hi guys,
My KE70 is finished as far as the conversion is concerned. For those who don't know, I had a 100KW 4ag put into it...

Anyway, it pulls hard to 4000RPM but above this, seems not to come on as strong as it should. (Shouldn't peak power be above 4000?)
Speaking to the bloke who did the conversion, it appears it may need some kind of speed signal (from the speedo??) to the ECU, otherwise the ECU leans out the mixtures or something, making it not go as well as it might.

Does anyone have any ideas on how to fix this?
  Send a private message to this user    
 Topic: Struts,Hubs and Stub axels
Cool1
Forums Junkie


I supported Toymods
Banned User

Location:
Brisbane
Registered:
May 2002
     
Struts,Hubs and Stub axels Fri, 17 May 2002 10:10 Go to previous messageGo to next message
Whats the difference between Ta22 and Ta23 Struts, Hubs and Stub axels?
  Send a private message to this user    
 Topic: Dash mounted auto shifter display
Apollo
Forums Junkie


Location:
Brisbane, QLD, Australia
Registered:
May 2002
Dash mounted auto shifter display Fri, 17 May 2002 11:01 Go to previous messageGo to next message
Just wondering before I hunt one down, would my car already have the wiring for the dash mounted automatic transmission display? (The bar that is inbetween the speedo and the tacho). And would a real camry one just go in? IE: Holden didn't change the instrument panel? I should really go have a good look at a real camry. Smile

Thanks.
  Send a private message to this user    
 Topic: bigger injectors with standard 1ggte ECU
japspec
Regular


Registered:
May 2002
bigger injectors with standard 1ggte ECU Fri, 17 May 2002 13:39 Go to previous messageGo to next message
Has anybody fluked using some sort of larger injector other than standard on a standard ecu in a 1ggte. Or any motor with a standard ecu for that matter????

Just asking

Cheers
  Send a private message to this user    
 Topic: ECU for 100kw 4AGE?
idfamily
Occasional Poster


Location:
AKINA Tofu shop
Registered:
May 2002
ECU for 100kw 4AGE? Sun, 19 May 2002 04:29 Go to previous messageGo to next message
can anyone suggest me some brand and
give me the price as well?

and how is the different after it get installed?
top speed? horse power?

my car is orginal 100kw AE86,
have exhaust, air filter only.
  Send a private message to this user    
 Topic: More suspension
86sprinter
Occasional Poster


Location:
sydney,greystanes
Registered:
May 2002
icon5.gif  More suspension Tue, 21 May 2002 00:26 Go to previous messageGo to next message
Hey guys im looking at lowering my 85 sprinter & im just wounderin if ne1 knows anywhere in sydney were i can get king springs not necessarily fitted, prices please
cheers mick
Freak
  Send a private message to this user    
 Topic: 4age TPS wires
TurboRA28
Forums Junkie


Location:
Terrigal
Registered:
May 2002
4age TPS wires Tue, 21 May 2002 04:32 Go to previous messageGo to next message
Hello, I've got a 4AGE TPS that I am going to use on an autronic system.

I need to find out what each of the 4 wires are that come out of it.

Only require +ve -ve and signal.

Anyone know which ones these are?

Thanks
  Send a private message to this user    
 Topic: S14 Silvia Electric Seat Adjustmet
EMP-2TG
Forums Junkie


Location:
Carlingford, Sydney
Registered:
May 2002
 
icon5.gif  S14 Silvia Electric Seat Adjustmet Tue, 21 May 2002 06:41 Go to previous messageGo to next message
Does anyone know how to hook up the Electric Seat Adjustment on S14 Silvia seats
there is a plug with 3pins and a plug with 2 pins + there is a 2 pin plug on the non electric passenger seat

Does anyone know what the plugs configuration is?
any website or info on this would help heaps

BTW - there going into my KE30
Thanks
  Send a private message to this user    
 Topic: JZZ30 LSD 4.083 AXLE CODE
Manny
Forums Junkie


Location:
Sydney
Registered:
May 2002
JZZ30 LSD 4.083 AXLE CODE Tue, 21 May 2002 12:31 Go to previous messageGo to next message
Anyone know the axle code for 4.083 ratios with LSD on the Soarer?
Also, besides the Soarer, what other Toyota models was this combination available on?
  Send a private message to this user    
 Topic: Backyard Operation
Les
Forums Junkie


Registered:
May 2002
Backyard Operation Fri, 24 May 2002 03:56 Go to previous messageGo to next message

Didnt read all of this - but 0-100 in 5 secs.. pretty good !

http://www.geocities.com/MotorCity/Pit/9975/vehicl es/MyCarina.html
  Send a private message to this user    
 Topic: AFR meter - anyone got one?
mrshin
Forums Junkie


Location:
Montrose, VIC
Registered:
May 2002
 
AFR meter - anyone got one? Fri, 24 May 2002 13:59 Go to previous messageGo to next message
Is anybody lucky enough to have access to an accurate air/fuel ratio meter that I could hire/borrow/beg/polish their shoes for? Or maybe an idea who I could ask? Various 'experts' have tried tuning my car, without being entirely successful, so I figure I'd like to have a bit of a go myself, and I'd like to use something slightly better than a $10 LED mixture meter. Thanking you greatly! Rolling
  Send a private message to this user    
 Topic: Spray Painting costs?
WOW16V
Regular


Location:
Glossodia,NSW
Registered:
May 2002
Spray Painting costs? Tue, 28 May 2002 13:01 Go to previous messageGo to next message
I've just repaired my rear bumper (ae92 jetspeed rear bar) I've given it a all over sand with 400 wet/dry sandpaper.How much should it cost to get it sprayed?
  Send a private message to this user    
 Topic: Engine bushes / idle sensor
carwash(ex)guy
Newcomer


Location:
Castle Hill
Registered:
May 2002
Engine bushes / idle sensor Tue, 28 May 2002 22:51 Go to previous messageGo to next message
I have an 1986 Seca SX (white, lowered all the way).
It has a 100kW 4AGE put in it (by previous owner).
The engine bushes are worn / out / half missing and I need to replace them.
Do I need bushes to suit my body or my engine?
Are they the same anyway?
How much is involved in replacing them (time and money)?

I am sick of the clunking every time I accelerate!

Also, need a new idle sensor (i think)- stays at 2000, with full slack on throttle cable. How much, where from?
  Send a private message to this user    
 Topic: Possible broken gearbox linkage
blackRA28
Forums Junkie


Location:
adelaide
Registered:
May 2002
Possible broken gearbox linkage Wed, 29 May 2002 12:47 Go to previous messageGo to next message
Hello, i have a 5 speed 1977 ra28 celica and i managed to snap something in the gearbox the other day reseulting in a slow tow down a local main road home... the gear stick has become loose and movable and can move through the positions of all top-row gears with no restriction but can not go into the bottom row, there is no feel of any gears moving though or contact with moving the stick. I believe it is stuck in neutral(unless my clutch is kaput) Would anyone knowledgable of gearboxes be able to tell me what i could have done? i am lucky tho as i have had the car for a fair while now and this is the first thing to break, since it is an old car and fairly stock. i have removed only the top plate of the shifter and not proceeded any further as yet.
a friend of mine said it is probably the selector which is broken or something similar, and probably not terminal hopefully.. any comments or advice would be greatly appreciated. anyone know of anyone that specialises in this type of job in Adelaide??
-Guy
BlackRA28
18rc
  Send a private message to this user    
 Topic: re: urgently required for MR2
GTMR2
Occasional Poster


Location:
Melbourne
Registered:
May 2002
 
re: urgently required for MR2 Thu, 30 May 2002 07:52 Go to previous messageGo to next message
Hi all

I really need a wiring diagram for a 3SGTE 91 turbo Jap spec GT MR2 and a 3SGE 94 Aussie spec GT MR2.

I need this really really quickly! Please supply any links you may know of as I am looking extensively at the moment.

regards,

richard@satworld.com.au
Richard Taranto - 0402 844 698
  Send a private message to this user    
 Topic: Fuel pressure regulators - Turbo/NA?
TurboRA28
Forums Junkie


Location:
Terrigal
Registered:
May 2002
Fuel pressure regulators - Turbo/NA? Mon, 03 June 2002 03:49 Go to previous messageGo to next message
Hello, wondering if there is a diference between fuel pressure regulators designed for a forced induction engine and a NA engine?

Thanks!
  Send a private message to this user    
 Topic: 1jz box prob
Suprad
Newcomer


Registered:
June 2002
1jz box prob Wed, 05 June 2002 01:22 Go to previous messageGo to next message
Hey guys.... I have a question to ask the 1j gurus. I am getting or have had my gearbox rebuilt for my car and the rpob is that the manual switch next to the selector is playing up. The guy that is fixing it says that it is dropping the line pressure in the box and he doesnt know how the sitch works or what solenoid in the box it activates or anything like that and neither do I. I was wondering if anyone out there knew of this happening and how to fix it or even if anyone has the wiring diagram for the gearbox itself and associated parts. Any help IS greatly appreciated. Thanks.
  Send a private message to this user    
 Topic: big valve on 4AG and port question?
sqmax
Newcomer


Location:
Brisbane
Registered:
June 2002
big valve on 4AG and port question? Wed, 05 June 2002 06:26 Go to previous messageGo to next message
Is the 20V inlet port similar size to small port 16v inlet port?Bigger or smaller?

16V 4AG has the option for big valve, inlet/exh, 33.4mm/27.5mm and 32mm/27.5mm. Will the 33.4 inlet valve be any obstruction in the combustion chamber?ie too close to the wall of the chamber.

Is it true with bigger inlet valve like 33.4mm and keeping the inlet port stock(w/o porting), we can keep the air velocity up and use less duration cam for broader power/torque range


  Send a private message to this user    
 Topic: FIELD SFC-Hyper R
idfamily
Occasional Poster


Location:
AKINA Tofu shop
Registered:
May 2002
FIELD SFC-Hyper R Wed, 05 June 2002 07:22 Go to previous messageGo to next message
anyone using?
  Send a private message to this user    
 Topic: Throttle bodys (again)
Apollo
Forums Junkie


Location:
Brisbane, QLD, Australia
Registered:
May 2002
Throttle bodys (again) Wed, 05 June 2002 11:26 Go to previous messageGo to next message
Ok, so I can't get one to bolt straight on. I'd need an adapter.

Can I at least get one that will hook up all hoses fine? (5sfe).

Also, what about dual throttle body's? Exactly how do those work? Are they like the old dual barrel carbs? One would do most of the work, but, on FOT the 2nd one would also open?
  Send a private message to this user    
 Topic: wiring and insanity, both go hand in hand
Leighp
Forums Junkie


I supported Toymods

Location:
NY
Registered:
May 2002
 
icon9.gif  wiring and insanity, both go hand in hand Thu, 06 June 2002 06:10 Go to previous messageGo to next message
After hours of staring at the body loom, i realised that i need the ecu pin outs for the ae 92 and wires for that too. What do you do for the 12p plug and where did you get the info for it (pin outs and colours etc).

so far it looks like this for me

20 v map Wire Colours ECU pinout description

pin 1 - +B1
2 RW BATT
3 Light green CCQ or CCO
4 - FC
5 BY AC2
6 RY ACT
7 BR +B
8 R yellow or orange or light brown....unsure W
9 R EGW
10 BW AC1
11 VW SPD SP1
12 B ELE2


That is what I have seen to the best of my poor vision. If what is there helps
you to help me PLEASE HELP ME. I am a little confused with it all now.

Also what of that loom do i need


Leigh

  Send a private message to this user    
 Topic: Seatbelts - URGENT
tianporn
Newcomer


Registered:
June 2002
icon5.gif  Seatbelts - URGENT Thu, 06 June 2002 10:07 Go to previous messageGo to next message
Hi guys,

Today i went to get my Warrent of Fitness and failed because my front passenger seatbelt is screwed. The darn thing won't recoil properly and so i took it out for inspection. Now, you can't even uncoil the seatbelt so it must be faulty.

My question is do i have to get AE86 seatbelts or can I use some from a Toyota or possibly even another type of car?

Help is apreciated Smile

[Updated on: Fri, 07 June 2002 04:22]

  Send a private message to this user    
 Topic: Hubs for a 3SGTE
sxturbo
Occasional Poster


Location:
Central Coast
Registered:
June 2002
Hubs for a 3SGTE Fri, 07 June 2002 15:53 Go to previous messageGo to next message
please help me, i have an MR2 turbo gearbox with LSD in my car and the driveshafts have been modified (made smaller) to fit my celica hubs. The problem is that i keep destroying c/v's so i want to use the full mr2 shafts. Now is there anyone here that can tell me if i can either swap MR2 rear hubs to my front OR if i can use hubs from a V6 manual camry as they both have the E153 gearbox???????
PLEASE HELP ME no one seems to be able to help me?????
PLEASE!!!!
  Send a private message to this user    
 Topic: FIELD SFC HYPER-R
idfamily
Occasional Poster


Location:
AKINA Tofu shop
Registered:
May 2002
FIELD SFC HYPER-R Sat, 08 June 2002 05:05 Go to previous messageGo to next message
anyone got the Manuel for
FIELD SFC HYPER-R..

or any one has installed it into 4AGE ...
can share the experience?
  Send a private message to this user    
 Topic: Tojo diff sizes/codes/ and donor cars
AE86_Sprinter
Regular


Location:
Perth, WA
Registered:
May 2002
Tojo diff sizes/codes/ and donor cars Thu, 13 June 2002 05:09 Go to previous messageGo to next message
http://ourworld.compuserve.com/homepages/stepho/di ff.htm

tis good Smile

Mike
  Send a private message to this user    
 Topic: Brakes Question...
inertia
Forums Junkie


Location:
Melbourne
Registered:
May 2002
Brakes Question... Thu, 13 June 2002 11:01 Go to previous messageGo to next message
Hey all,

When my car has been driven for a while and everything is at operating temperature. Under light braking when speeds decrease to say 40km/h I can hear a metal scrapping/grating noise, not the low material indicators... The discs are fine there is no pulsating.

If I coast in a car park and lighlty apply the brakes the noise is there, very loud. If I pump the brake pedal at idle there is a squishing noise (ie: if you squeeze a detergent bolt that is empty lightly it will be a sound like my brakes are making, that appears to come from the mastercylinder. The calipers creak also.

My thoughts are that there is alot of air in the system and that the pads are not being pressed against the discs firmly enough, hence the grating/scraping noise.

I am up for suggestions, I believe new pads/bleeding might fix it but if you know or believe that it is something else then please comment!

thanks in advance.
  Send a private message to this user    
 Topic: 4 Wire O2 Sensor
troyboy
Regular


Location:
Colyton, NSW
Registered:
May 2002
 
4 Wire O2 Sensor Wed, 19 June 2002 13:23 Go to previous messageGo to next message
Hi Guys ,, need help'


my o2 sensor has 4 wires.. does any one know what it is made of??

i assume1 is a +12V, there must me a ground aswell

what are the other 2 wires doing there???

colour coding wouldbe nice...
  Send a private message to this user    
 Topic: General Questions
Leighp
Forums Junkie


I supported Toymods

Location:
NY
Registered:
May 2002
 
icon10.gif  General Questions Wed, 19 June 2002 16:03 Go to previous messageGo to next message
Could some one please tell me the folloeing answers:

Does any one here know what the colours are for the exhaust temp sensor and the o2 sensor are(that is on the connector in the bay plug) for a silver top 20v??

Also is the standard extractors thru to first cat on the 20v worth keeping or would someone recommend me to get aftermarket units??

Thanks
LP
  Send a private message to this user    
 Topic: ECHO / Corolla 1NZ-FE Turbo & Racey Bits
Sportivo
Occasional Poster


Location:
Myrtleford Victoria
Registered:
June 2002
icon14.gif  ECHO / Corolla 1NZ-FE Turbo & Racey Bits Wed, 19 June 2002 21:38 Go to previous messageGo to next message
Up To Something
Echo Sportivo & Corolla using the 1NZ-FE Engine
Turbo from http://www.capa.com.au/turbo_kits_petrol.htm
Racey Bits from
http://www.trdshop.com/shop/index.asp
*New Zealand Branch of Toyota Racing Development
Can't find Oz one yet??!! Nope

[Updated on: Wed, 19 June 2002 21:43]

  Send a private message to this user    
 Topic: Trevor - TA22/3SGTE
greypower
Occasional Poster


Location:
Brisbane -northside
Registered:
June 2002
Trevor - TA22/3SGTE Wed, 19 June 2002 23:15 Go to previous messageGo to next message
Wondering if you could post/send any pics of your conversion. Starting the same myself so any short cuts/hassles etc. would be welcome. Did you recess/box firewall for head overhang, or shift engine forward? Did you ditch dizzie & running coil pacs with crank trigger? What did you use for engine mounts? Interested to hear from anyone else doing same conversion.
  Send a private message to this user    
 Topic: BLACK TOP 20V&6sp 1/2 cut price?Please
andrewvibert
Forums Junkie


Forum Sponsor

Location:
Shepparton (Vic)
Registered:
May 2002
BLACK TOP 20V&6sp 1/2 cut price?Please Fri, 21 June 2002 04:28 Go to previous messageGo to next message
Can someone please give me a price on a black 20 valve 6 sp 1/2. cut. It wont ever be avail in Aust if I cant give a price.
  Send a private message to this user    
 Topic: Link to AE86 EFI electrical diagrams
cswan
Regular


Location:
Melbourne
Registered:
May 2002
icon14.gif  Link to AE86 EFI electrical diagrams Fri, 21 June 2002 09:13 Go to previous messageGo to next message
FWIW I've stumbled across some RWD AE86 electrical diagrams.

They're at http://www.racingstrong.com/aw11/aw 11parts.asp#corolla

Hope you find them useful.

[Updated on: Fri, 21 June 2002 22:33] by Moderator

  Send a private message to this user    
 Topic: chassis dyno, not accurate
5KinKP60
Regular


Location:
Finland
Registered:
June 2002
chassis dyno, not accurate Sun, 23 June 2002 09:41 Go to previous messageGo to next message

many seasoned enthusiasts know that chassis dynos can be way off from true readings.
i shall include here a link that'll explain this more thoroughly. (note - further links have been operational, for some reason just today links on that page don't work - try them later).

nevertheless, no matter how far off the calibration is, it still can be used in fine tuning of engine.

i hope this helps someone out there.



http://sdsefi.com/techdyno.htm


  Send a private message to this user    
 Topic: 2TGEU Timing & Injectors
Karl_skewes
Regular


Location:
New Zealand
Registered:
May 2002
2TGEU Timing & Injectors Fri, 28 June 2002 06:45 Go to previous messageGo to next message
Anyone know the base timing? I'm guessing around 12deg.

Also, what's the best way to go abour replacing the injectors whilst the engine is in the car?

Karl

[Updated on: Fri, 28 June 2002 20:34]

  Send a private message to this user    
 Topic: AE92 Lower Control Arm Bush replacement
4RS_FED
Occasional Poster


Registered:
May 2002
AE92 Lower Control Arm Bush replacement Fri, 28 June 2002 09:59 Go to previous messageGo to next message
Hi,

I need some advice on replacing front lower control arm bushes for an AE92 Seca. I know the existing bushes need replacement, and have decided on new nolathane bushes.

My question is: is this a job I can do at home?
I enjoy general maintenance on my Corolla, but critical systems such as shocks/springs I have taken to experts in the past.

Other questions:
What is the general process for bush replacement?
Are any special tools required?
Is worn bushes a reason for rejecting registration renewal?
What sort of price ranges have people paid in the past for this job?

Thanks for your help,
Brian.
  Send a private message to this user    
 Topic: Supra Steering Noise
jza70-mel
Regular


I supported Toymods

Location:
Perth WA
Registered:
May 2002
Supra Steering Noise Fri, 28 June 2002 12:55 Go to previous messageGo to next message
Hi Guys,

Lately, my car has been making loud thumping noises around the passenger front wheel area. They happen when I turn full lock right and reverse out of a park, or just reverse backward and hit the brakes. These is a loud clunk as though something is loose under the car on the passenger side. It clunks back when I drive forward then hit the brakes.
The problem doesn't reproduce itself when normal driving apart from full lock situations.
I looked on the net and saw that engine mounts can wear out and cause a loud clunking, but I don't think it's this because it also happens at low speed particularly when reversing with wheels pointed right.

What is it? Does this mean my steering is going to let go and I'm going to have a crash? I don't want to take it to a mechanic who might not have a clue to get ripped off. This ruins the driving experience of an otherwise excellent car.

Thanks again

[Updated on: Fri, 28 June 2002 12:56]

  Send a private message to this user    
 Topic: RWD 4A-GZE Block only, Water Pump/Thermostat
rwdTrueno
Occasional Poster


Location:
Auckland, New Zealand
Registered:
May 2002
RWD 4A-GZE Block only, Water Pump/Thermostat Fri, 28 June 2002 21:29 Go to previous messageGo to next message
Has anyone tried using the RWD 4A-GE Water Pump/Thermostat and lines on a 4A-GZE block, I lined it up yesterday but the bar that goes from the water pump to the back of the motor hits the knock sensor.
  Send a private message to this user    
 Topic: wiring
smithie
Newcomer


Registered:
June 2002
icon5.gif  wiring Sun, 30 June 2002 23:49 Go to previous messageGo to next message
hi guys
in my ae92 cs, where the ecu is mounted on the efi corollas, i have a blue box of some sort. What is this blue box and is it still needed when doing a 20v conversion into my car or does the 20v ecu do everything? Has it got something to do with polution gear? Thanks guys
  Send a private message to this user    
 Topic: New addition to the K-Mac swaybar line-up...
RAV-GT4
Forums Junkie


Toymods member
I supported Toymods

Location:
Rydalmere, NSW
Registered:
May 2002
 
icon10.gif  New addition to the K-Mac swaybar line-up... Mon, 01 July 2002 12:46 Go to previous messageGo to next message
Received an email from K-Mac today after my visit to Sydney for the Weight-Watcher's event. One of the reasons I went to Sydney was to see K-Mac for a measure-up of the rear-end of the RAV4 - they initially said that it couldn't be done; upon visiting the K-Mac store in Rockdale, they then said that it could be done, but with all the extra bracing it would cost in the vicinity of $350 - $400 for the rear to be supplied and fitted; today I get an email from them that said the rear swaybar for the long-er wheelbase RAV4 is in production and now available for $225 supplied. The funny thing is that they made up this swaybar modelled off MY RAV4! (I hope the rear end wasn't screwed up or dented when they took the measurements...) Grin

They also recommend that the rear swaybar be used in conjunction with the front one as well. Whether this is practical or not, or just a sales stunt, I'm not sure. Eye Spin

The RAV isn't much of an understeerer, and handles OK now the new suspension is fitted up and broken-in. I can't really see the rear-end getting all that tail-happy around corners, but I want the suspension all-round to be stiffer.

Any thoughts/ideas on the matter?

Cheers. Smile
  Send a private message to this user    
 Topic: 7mge to gte
shads
Newcomer


Location:
sydney
Registered:
July 2002
icon5.gif  7mge to gte Tue, 02 July 2002 10:08 Go to previous messageGo to next message
Hi guys,

I was after a few mod ideas for my 7mge in my cressida. After a bit of dent poping and before buying some decent wheels lol.I was thinking along the line of the turbo off the gte but is it worth it? Freak or am i wasting my time? I would really like to here from some 7mge owners on what mods they have done.
Rolling



"TO MOD ,OR KEEP THE STOCK THAT IS THE QUESTION"
  Send a private message to this user    
 Topic: 3vz-fe's
racerhex
Newcomer


Location:
Georgia, US
Registered:
July 2002
   
icon10.gif  3vz-fe's Tue, 02 July 2002 14:33 Go to previous messageGo to next message
hey I was just wondering whos working on a 3vz-fe engine? What have you done to it...and future mods?
  Send a private message to this user    
 Topic: Bits for a Sprinter
Hirogen
Forums Junkie


Location:
Melbourne, Australia
Registered:
July 2002
      WTF is a jabber?
icon2.gif  Bits for a Sprinter Tue, 02 July 2002 16:45 Go to previous messageGo to next message
Recently scored myself an 85' Sprinter. Now I look at it and think, hmm, yeah its kinda kool lookin but it looks kinda plain. Then i have the brainwave.. "Trueno Front" now im certainly not the first person to have said idea I know. What i need is a place that will either have one or can somehow get me one. Im in the melbourne area but am not limiting myself to places in victoria so any help is appreciated. (Had my heart set on a Trueno for a few years and this is the best thing i could find for the time being, also a place that might have suitable engine conversions wouldnt hurt either, ge, gze you know the drill) anyways like i said any and all help is greatly appreciated.
  Send a private message to this user    
 Topic: JZA70 Mounts needed
chips
Newcomer


Registered:
July 2002
icon4.gif  JZA70 Mounts needed Thu, 04 July 2002 14:59 Go to previous messageGo to next message
HELP!!! I really need a set of JZA70 1JZ engine mounts. The metal ones that bolt to the block. If you have a set or can locate a set, please let me know.

I tried the JZA80 mounts, but they mount up about 1-2 inches too far forward.

Thanks,
-Chip

supras@mac.com
  Send a private message to this user    
 Topic: 1uz into Hilux 1994(2wd)
andrewvibert
Forums Junkie


Forum Sponsor

Location:
Shepparton (Vic)
Registered:
May 2002
1uz into Hilux 1994(2wd) Fri, 05 July 2002 04:25 Go to previous messageGo to next message
Can anyone help. Will it fit.
  Send a private message to this user    
 Topic: Faulty valve behavior?
JonsonRA23
Occasional Poster


Location:
Hobart, TAS
Registered:
May 2002
Faulty valve behavior? Fri, 05 July 2002 13:48 Go to previous messageGo to next message
If my motor (18r) had a burnt/sticking/leaky valve, what would it behave like? could it make the motor make pop/bang noises through the carby?

[Updated on: Fri, 05 July 2002 14:32]

  Send a private message to this user    
 Topic: Brake upgrade : AE71
Gremlin
Regular


Location:
Maroubra
Registered:
June 2002
 
Brake upgrade : AE71 Fri, 05 July 2002 19:29 Go to previous messageGo to next message
G'day

I need to upgrade my brakes due to the fact that i have a 4a-gze in my baby...

i was told that the front brakes from a mx73 cressida with a little modification would go nicely and the rear end from an ae86 sprinter (LSD???) would also go pretty much straight on.

Any ideas or comments please let me know
  Send a private message to this user    
 Topic: were to get new or used ae92 4agze cv from?
trd2nv
Regular


Location:
adelaide
Registered:
May 2002
were to get new or used ae92 4agze cv from? Sat, 06 July 2002 05:43 Go to previous messageGo to next message
hi i was wondering would anyone know were i can get second hand or brand new ae92 4agze cv from because i brought some with the gear box but on one of the cv the end of it has been all pushed in were you put the nut on and the slipt pin in so yeah if anyone know give me a msg

dont say at toyota becausde they want to much

thanks
  Send a private message to this user    
 Topic: What can i do??
Striker
Newcomer


Location:
Sydney
Registered:
July 2002
 
icon14.gif  What can i do?? Sun, 07 July 2002 05:09 Go to previous messageGo to next message
Hey guys,
I am new to this forum and i dont have much technical understanding!
So first i would like to say the info i have seen on this forum is A+

I have recently bought a 92 Corolla GTI, my understanding from reading is that it has a 4A-GE engine.

I would like to know what mods i can do to it, it is still standard and i would like to get some extra grunt out of it.

I dont want to change the engine as i have read like puting in a 4A-GZE, what i would like to know is about exhaust systems, extraction systems and also any filters and oils you guys would recommend.

Thanks,
Raph...

[Updated on: Mon, 08 July 2002 13:13]

  Send a private message to this user    
 Topic: Need a big arse favour...
mrshin
Forums Junkie


Location:
Montrose, VIC
Registered:
May 2002
 
icon10.gif  Need a big arse favour... Sun, 07 July 2002 07:55 Go to previous messageGo to next message
Hey there peoples

I went to the dyno day today, had a real good day. My car was the ae86 on LPG/turbo. I was happy with the way the car went and all, but a small problem - on the way home I busted 2nd gear! Does anyone happen to have a spare T50 around that they'd sell to me? Also, can someone suggest a workshop around the baulkham hills area that might let me use their tools etc. to shove it in? GREATLY APPRECIATED!
  Send a private message to this user    
 Topic: 18RG mods??
Shteeve
Regular


Location:
near chris and murray vic
Registered:
July 2002
 
18RG mods?? Mon, 08 July 2002 07:42 Go to previous messageGo to next message
I've recently bought a ra23 with 18RG engine and hot cams. any ideas for some mods for a bit more power that wont go and break my (relatively small) bank?
  Send a private message to this user    
 Topic: lexus/soaer alternator specs?
leadfoot
Newcomer


Registered:
July 2002
icon5.gif  lexus/soaer alternator specs? Mon, 08 July 2002 17:02 Go to previous messageGo to next message
hello all,

can anyone tell me what the amperage rating is on a lexus/soarer jap import 4litre altrnator?

many thanks.
  Send a private message to this user    
 Topic: Help identifying a gearbox
Liam
Regular


Location:
Perth
Registered:
July 2002
Help identifying a gearbox Tue, 09 July 2002 04:16 Go to previous messageGo to next message
Hey all,

I have recently got a 4AGZE engine, and a spare gearbox thrown in. I am not too sure what type the gearbox is though. I have been told it was a GZE box but the guy was not 100% sure.

I found the serial number just next to the dust cover for the release lever. It reads:
A90700661

On the main drain bolt (lock bolt?) it has a warning written in English saying to consult the user's manual before opening.

Near the rear torque mounting there is a cylndrical metal valve that reads "YAZAKI < METER". If it's at all relevant, i found this site... http://www.yazaki-na.com

Are these enough clues to identify it ??
Thanks,
Liam.
  Send a private message to this user    
 Topic: Cam pulleys....
AE86 Levin Melbourne
Regular


Location:
Melbourne
Registered:
May 2002
Cam pulleys.... Tue, 09 July 2002 12:03 Go to previous messageGo to next message
I just wondering if there is any different, in terms of power, to the a stock 4age by just changing the original pulleys to the adjustable cam pulley,....
thanks...
  Send a private message to this user    
 Topic: Pop Up Headlights
DJBlade091
Occasional Poster


Location:
Central Coast NSW
Registered:
July 2002
icon10.gif  Pop Up Headlights Wed, 10 July 2002 00:44 Go to previous messageGo to next message
Hey all,


Has anyone attempted to put the popup headlights from a supra, celica, levin etc into an AE92 ? Evil or Very Mad

I'm currently in the process of modding my GTi Hatch, and reckon they'd look sweet as... besides the obvious pannel work.. and getting an autoelectrian to wire them up, there shouldnt be any issues with the rta?

I've deciding on which front bar i want, and the gze conversion is coming l8r....

On that note,

I'm getting a AE101 GZE half cut with either gze box or 20v 6 Speed, I want to get around 180KW at the wheels.... The GZE is getting a rebuild and what whould you reckon would be needed to get this sorta power.

I was looking a Big Arse Turbo - Havent decided on what one yet ( any ideas Question ), Supra Front Mount Cooler, 3" Mandrel Bent straight through system, dual boost controlla (for when the missus drives) Cry, DBA Slotted Rotors, Twin Pot Calipers, Briaded Hoses ( ne1 know if braided brake lines are legal in NSW? ) Supra Injectors, etc... etc...

  Send a private message to this user    
 Topic: Need to look at a 5m-ge
ed_ma61
Forums Junkie


Location:
Lost in the K hole
Registered:
May 2002
Need to look at a 5m-ge Wed, 10 July 2002 10:53 Go to previous messageGo to next message
does anyone in syd have a 5m-ge disassembled, or lying around, that i can come have a look at?

i need to know how involved it is whacking a 5m-ge head onto the 'ol 5m-e block. ie how do the timing belt pullies fit, is the oil pump shaft different, is the crank shaft different etc etc

would be MUCH appreciated.

cheers
ed
  Send a private message to this user    
 Topic: Needed - Pic of ta22 with B45 simmons
Classique71
Forums Junkie


Location:
Colac, Victoria
Registered:
May 2002
Needed - Pic of ta22 with B45 simmons Thu, 11 July 2002 09:38 Go to previous messageGo to next message
Needed - as title suggests

Anyone out ther have a decent side on or semi side on picture of a ta22 with the b45 series simmons wheels on it ?

The wheels are similar to those on the whit ta22 that pops up in the titles on tioymods - cept the sytle is a star - instead of flat ..

I need it for photoshop doctoring - to see how said wheels wwill look on mine

Stuart
  Send a private message to this user    
 Topic: Suspension Lights Flashing
mat_lennon
Occasional Poster


Location:
brisbane
Registered:
May 2002
 
Suspension Lights Flashing Fri, 12 July 2002 08:01 Go to previous messageGo to next message
Hi,

I am having the problem with the lights on the suspension adjuster keep constantly flashing like the soft medium and hard lights all together. Its a 1988 Nissan Maxima ( turbo if it means anything ) i was just wondering because it is AFAIK similar to tems? IF that happens to the tems buttons what does it mean. Or even better what does it mean in my case. Any help would be appreciated.
Thnx

Matt
  Send a private message to this user    
 Topic: interesting mr2
purpleminiep
Regular


Location:
Mentone
Registered:
May 2002
interesting mr2 Fri, 12 July 2002 09:21 Go to previous messageGo to next message
check out this link

http://www.bobnorwood.com/MR2.htm

shooooooooooooort stroke 4age

Brad
  Send a private message to this user    
 Topic: Turbogal's 11 sec engine setup in sprinter ?
Petrovski
Newcomer


Location:
Bonnet Bay
Registered:
July 2002
 
Turbogal's 11 sec engine setup in sprinter ? Fri, 12 July 2002 14:22 Go to previous messageGo to next message
the engine setup that turbogal has in her 11 sec corolla.
would a setup something along those lines be able to get done in a ae86 sprinter??

Pete Smile
  Send a private message to this user    
 Topic: how much should I paid for a 7m-gte front-cut with manual?
0zwilly
Occasional Poster


Location:
Perth
Registered:
June 2002
 
how much should I paid for a 7m-gte front-cut with manual? Fri, 12 July 2002 18:25 Go to previous message
as title. Is there any cheapes?
  Send a private message to this user    
Pages (35): [1  2  3  4  5  6  7  8  9  10  11  12  13  14  15  16  >  »]


Current Time: Tue Feb 25 19:43:42 UTC 2020

Total time taken to generate the page: 0.093271970748901 seconds

Bandwidth utilization bar

.:: Contact :: Home ::.

Powered by: FUDforum 2.3.8
Copyright ©2001-2003 Advanced Internet Designs Inc.