F.A.Q.    Register    Login    Home Members    Search

Toymods » Tech & Conversions » V160 Clutch Show: Today's Posts  :: Show Polls  Email to friend

Author	Topic
deesonet Regular Location: Toowoomba Registered: May 2002	V160 Clutch Sun, 19 October 2003 09:47 I am converting a 1JZ engine from auto to manual by fitting a complete V160 package. The clutch plate was very new - almost no wear on the plate at all. When I fitted the pressure plate I think that it doesn't have much pressure onto the clutch plate. How many millimetres should it compress onto the plate. By my measurements it is only about 0.5mm difference between no pressure and fully bolted up. I would have expected it to be much more. The manual doesn't give a measurement for the pressure plate to check clearances before fitting. Any thoughts?? [Report message to a moderator]

	Subject	Poster	Date
	V160 Clutch	deesonet	Sun, 19 October 2003 09:47
	Re: V160 Clutch	Soarer	Sun, 19 October 2003 12:02
	Re: V160 Clutch	Stenno	Mon, 20 October 2003 00:19
	Re: V160 Clutch	deesonet	Mon, 20 October 2003 08:33
	Re: V160 Clutch	Stenno	Mon, 20 October 2003 09:27
	Re: V160 Clutch	deesonet	Tue, 21 October 2003 09:33
	Re: V160 Clutch	deesonet	Sat, 25 October 2003 09:33
	Re: V160 Clutch	Stenno	Sun, 26 October 2003 05:09
	Re: V160 Clutch	Cyber-punk	Mon, 27 October 2003 03:59
	Re: V160 Clutch	Norbie	Mon, 27 October 2003 07:13
	Re: V160 Clutch	humble	Mon, 27 October 2003 11:30
	Re: V160 Clutch	Norbie	Mon, 27 October 2003 12:59

Previous Topic:	TruTrac diff in F-series casing
Next Topic:	Hood for a 89 Celica

Powered by: FUDforum 2.3.8
Copyright ©2001-2003 Advanced Internet Designs Inc.