Hi all,
Any help with were these wires hook up and the like would be greatly appreciated.
I've been using an USA domestic wiring diagram for my engine(JDM MR2 4AGZE). There seems to be some differences, so if any MR2 owners or anyone with this engine could have a look, and help me out...
1.Next to were ignitor hooks up to engine loom.
wire colours are- white-black
red-black.
Plug is light-grey.
2.Comes out next to water tempsensor(at back of head).
Wire colours are- white
brown.
Plug is green.
3.Earth(?) off the front of the engine next to the radiator outlet.
Wire colours are- black-yellow.
Plug is black.
4.Runs parallel to an earth. Comes from back of inlet aqlong back of head
Wire colours are- black-white.
Plug is black.
5.Front of engine, above the alternator. Comes from wiring on top of engine(from inlet side).
Wire colours are- blue
blue-white.
Plug is light grey.
6.Runs with wiring from back of alternator.
Wire colours are- white-black.
Plug is black.
7.Meets with Oxygen Sensor, back of the alternator, and another unknown grey plug above alternator.
Plug is light grey
8.Same as above.
Wire colours are- white green
white-red
Plug is light grey.
Sat, 22 May 2004 09:38
