Toymods Car Club
www.toymods.org.au
F.A.Q. F.A.Q.    Register Register    Login Login    Home Home
Members Members    Search Search
Toymods » Tech & Conversions » 3T-GTE Injector Control

Show: Today's Posts  :: Show Polls 
Email to friend 
Return to the default flat view Create a new topic Submit Reply
AuthorTopic
GA22GT
Occasional Poster


Location:
Borneo - Land of the Head...
Registered:
April 2003
3T-GTE Injector Control Mon, 12 July 2004 18:09 Go to previous message
Greetings all,

Im trying to wire up my 3T-GTE but Ive run into some problems. Seems like the injectors wont open and start working. I manually triggered the Injectors and got the engine started for a few seconds, this is obviously not correct. Im wondering what have I wired wrongly. These are my questions.
1. The IG pin on the ECU is wired to the igniter where the RPM signal is output or does it mean ignition where 12V power is input when the key switch is switched on?
2. If I assume that IG refers to ignition and 12V is input here, what does the ECU use as an input signal to calculate the opening duration of the injectors?
3. Currently I know that the yellow wires are supposed to be the power for the injectors, I have supplied power to them directly, 12V through a relay without any resistors (I followed a wiring diagram I found), is this correct?
4. If what I did in Q3 is correct, what supplies the (-) signal for the injectors? On the ECU pins #10 and # 20 is supposed to be the switching side for the injectors. What is actually output from these wires, or is it input signals? Currently mine shows 12V + output, shouldnt it produce (-) signals for the injector?
Do you guys think Im missing any components?, according to the wiring diagram I dont need any resistors or any igniters (to boost - signal). Anybody got any info PLEASE help. Ive been at it for 3 days already, this problem is even creeping up in my sleep!! Thanks!!

Resner
http://www.geocities.com/levinboyz

[Updated on: Mon, 12 July 2004 18:16]

  Send a private message to this user    

SubjectPosterDate
Read Message   3T-GTE Injector Control  GA22GTMon, 12 July 2004 18:09
Read Message   Re: 3T-GTE Injector Control TurboRA28Mon, 12 July 2004 23:48
Read Message   Re: 3T-GTE Injector Control GA22GTTue, 13 July 2004 04:10
Read Message   Re: 3T-GTE Injector Control TurboRA28Tue, 13 July 2004 04:23
Read Message   Re: 3T-GTE Injector Control GA22GTTue, 13 July 2004 08:24
Read Message   Re: 3T-GTE Injector Control NorbieWed, 14 July 2004 00:23
Read Message   Re: 3T-GTE Injector Control 3t-RA40Wed, 14 July 2004 05:23
Read Message   Re: 3T-GTE Injector Control TA22 GTWed, 14 July 2004 11:58
Read Message   Re: 3T-GTE Injector Control GA22GTThu, 15 July 2004 01:35
Read Message   Re: 3T-GTE Injector Control NorbieThu, 15 July 2004 05:55
Read Message   Re: 3T-GTE Injector Control GA22GTSun, 18 July 2004 15:45
Read Message   Re: 3T-GTE Injector Control TurboRA28Mon, 19 July 2004 04:15
Read Message   Re: 3T-GTE Injector Control YelloRollaMon, 19 July 2004 05:54
Previous Topic:4AGE Aftermarket Valves
Next Topic:O2 Sensors any one will do?

Goto Forum:
-=] Back to Top [=-

Current Time: Sun Jul 27 15:45:06 UTC 2025

Total time taken to generate the page: 0.0041520595550537 seconds

Bandwidth utilization bar

.:: Contact :: Home ::.

Powered by: FUDforum 2.3.8
Copyright ©2001-2003 Advanced Internet Designs Inc.