| Author | Topic |
|---|
Location:
Ipswich
Registered:
May 2002
|
|
Ring gears, pinion gears, ratios etc
|
Tue, 14 September 2004 04:11
|
 |
As some of you may know, I've been on the lookout for a 4.3:1 ratio for my T-series diff (and an LSD if I can find one cheap enough).
Anyway, as far as I know my diff is out of an RA28 Celica (so I'm told anyway), and has a 3.9:1 ratio. Center is broken, missing bits that should be there. I did count the teeth when I first took it out, but have forgotten now, but I think it was a 43/11 ratio (3.909).
Anyway, I was speaking to the boys at Option1Garage the other day (they seem to be the only people I can get an LSD or gears from, everybody else seems to talk a lot and not deliver, or want a lot of money for their stuff), and they had a Cusco center and ring gear. Ring gear out of a 4.3:1 ratio, 43 teeth. But they don't have the pinion.
Now, looking at this page, it says that the TA23's and some other Celicas had a 41/10 ratio (4.1:1). Not sure how well this applies to the Celicas we have here, but I do know that most of them came with a 4.1:1 ratio so could either be 41/10 or 37/9.
Also, was speaking to Chin (Acoustic) when I was back in Malaysia, and he mentioned that he's got a 4.1:1 now, and he's looking for *just the ring gear* for a 4.3:1 because then he will have a 4.3:1 (reusing the 10-tooth pinion). Or maybe I got that the wrong way around... No, I think he was just looking for the ring gear...
Is this true? Can ring gears/pinions be swapped with each other like that? Or do they have to match each other?
|
|
|
| | Subject | Poster | Date |
|---|
 |
Ring gears, pinion gears, ratios etc
|
demuire | Tue, 14 September 2004 04:11 |
|
Re: Ring gears, pinion gears, ratios etc
|
demuire | Tue, 14 September 2004 04:14 |
|
Re: Ring gears, pinion gears, ratios etc
|
mrshin | Tue, 14 September 2004 04:16 |
|
Re: Ring gears, pinion gears, ratios etc
|
Norbie | Tue, 14 September 2004 04:17 |
|
Re: Ring gears, pinion gears, ratios etc
|
bbaacchhyy | Tue, 14 September 2004 04:51 |
|
Re: Ring gears, pinion gears, ratios etc
|
demuire | Tue, 14 September 2004 04:22 |
|
Re: Ring gears, pinion gears, ratios etc
|
demuire | Tue, 14 September 2004 05:01 |
|
Re: Ring gears, pinion gears, ratios etc
|
TurboRA28 | Tue, 14 September 2004 05:06 |
|
Re: Ring gears, pinion gears, ratios etc
|
demuire | Tue, 14 September 2004 05:32 |
|
Re: Ring gears, pinion gears, ratios etc
|
ra23celica | Tue, 14 September 2004 05:47 |
|
Re: Ring gears, pinion gears, ratios etc
|
Norbie | Tue, 14 September 2004 05:53 |
|
Re: Ring gears, pinion gears, ratios etc
|
demuire | Tue, 14 September 2004 06:05 |
|
Re: Ring gears, pinion gears, ratios etc
|
Simon-AE86 | Tue, 14 September 2004 06:36 |
|
Re: Ring gears, pinion gears, ratios etc
|
IRA11Y | Tue, 14 September 2004 06:50 |
|
Re: Ring gears, pinion gears, ratios etc
|
demuire | Tue, 14 September 2004 07:03 |
| Current Time:
Wed Jan 15 16:21:13 UTC 2025 |
Total time taken to generate the page: 0.011309862136841 seconds |
