Location: Glenmore Park, NSW
Registered: March 2004
Wiper Motor Woes
Fri, 01 October 2004 10:50
Hey guys.
I'm on my second replacement wiper motor for me ta22. Both 2nd hand from wreckers and neither have variable speed.
going to check wiring at the switch tomorow but i thought i'd just see if anyone knows voltages for these things.
below are the pins that get power at the 3 seperate switch points.
also would battery voltage affect the motor speeds or is itpowered via the alternator.
any help much appreciated.
Position 1 : pins 2 / 6
Position 2 : pins 2 / 3 / 6
Position 3 : pins 2 / 6
about 11.5 volts at each active pin , ignition on but car not running and multimeter earthed to the chasis near the battery. Battery voltage was at 12.3-4
Fri, 01 October 2004 10:50
