F.A.Q.    Register    Login    Home Members    Search

Toymods » Tech & Conversions » pre-loading diffs Show: Today's Posts  :: Show Polls  Email to friend

Author	Topic
Gased Regular Location: Melbourne Registered: May 2002	pre-loading diffs Fri, 27 September 2002 14:57 Can anyone explain the principle of preloading diffs? I've got a T series diff and want to make sure it is in spec before I install it. Team, What are the specs - preload torque, play etc and how to measure etc I've been told the crown/pinion play should be less than 6 thou all round measured with a dial guage. How to preload? Hope the pic comes out below - showing the loading ring, one of two. I take it that this locates the crown against the pinion. I've heard about using die blue to locate contact area on crown ring. How much lateral play is allowed in the inner cogs that attach to the axle? David P.S any leads as to add a pick - i'm using a Mac [Report message to a moderator]

	Subject	Poster	Date
	pre-loading diffs	Gased	Fri, 27 September 2002 14:57
	Re: pre-loading diffs	Gased	Fri, 27 September 2002 15:06
	Re: pre-loading diffs	5KinKP60	Fri, 27 September 2002 15:35
	Re: pre-loading diffs	5KinKP60	Fri, 27 September 2002 15:57
	Re: pre-loading diffs	Gased	Sat, 28 September 2002 08:22
	Re: pre-loading diffs	Hunty	Sat, 28 September 2002 09:44
	Re: pre-loading diffs	Gased	Sat, 28 September 2002 12:28
	Re: pre-loading diffs	Youngy	Sat, 28 September 2002 14:52
	Re: pre-loading diffs	Gased	Sun, 29 September 2002 10:27

Previous Topic:	3SGTE rebuild on its way!
Next Topic:	ae82 front bar on ae86 sprinter

Powered by: FUDforum 2.3.8
Copyright ©2001-2003 Advanced Internet Designs Inc.